Aminoethylethanolamine = AEEA = N-(2-Aminoethyl)ethanolamine

CAS Number : 111-41-1
Molecular Weight : 104.1
Formula : HO-(CH2 )2-NH-(CH2)2-NH2

Aminoethylethanolamine or AEEA is an organic base used in the industrial manufacture of fuel and oil additives, chelating agents, and surfactants.
Aminoethylethanolamine (AEEA) is a precursor for the production of amphoacetates which serve as a precursor to produce amphoteric surfactants.
AEEA is industrially produced in the process of the continuously hydrogenative amination of monoethylene glycol.    
In the reaction mixture AEEA is only yielded as a co‐product of 6.8%.    
The residual compounds of Aminoethylethanolamines are 3.4% of diethylene triamine, 7.0% of piperazine, 51.1% of ethylenediamine, 1.7% of diethanolamine and 30.0% of monoethanolamine.

Aminoethylethanolamine (AEEA) is a linear molecule with primary and secondary amine groups. 
AEEA is a colorless liquid, with slightly higher viscosity than EDA and DETA. 
Aminoethylethanolamine is used as an intermediate in the fabrication of detergents, fabric softeners, chelates, fuel additives and coatings.
A linear member of the ethyleneamines family, at room temperature Aminoethylethanolamine is a clear, colorless, oily liquid with a weak ammonia-like odor.
Aminoethylethanolamine is water soluble, and its dilute solutions have an alkaline pH. 
Aminoethylethanolamine is used in building block in the manufacture of specialty corrosion inhibitors.

Aminoethylethanolamine uses:
-Corrosion inhibitors
-Wet-strength resins
-Fabric softeners
-Epoxy curing agents
-Polyamide resins
-Fuel additives
-Lube oil additives
-Asphalt additives
-Ore flotation
-Corrosion inhibitors
-Ore flotation
-Corrosion inhibitors
-Epoxy curing agents
-Hydrocarbon purification
-Lube oil & fuel additives
-Mineral processing aids
-Polyamide resins
-Textile additives- paper wet-strength Resins
-Fabric softeners
-Fuel additives
-Chemical intermediates
-Epoxy curing agents
-Lube oils
-Wet strength resins

Aminoethylethanolamine is also known as AEEA. 
Aminoethylethanolamine is manily used in oil additives and surfactants. 
The boiling point of Aminoethylethanolamine is 243 degree celsius and melting point is -28 degree celsius. 
The molar mass of Aminoethylethanolamine is 104.15 g/mol.
The chemical formula of Aminoethylethanolamine is C4H12N2O. 
Aminoethylethanolamine is a single component with having very less ethylethanolamine impurity. 
Aminoethylethanolamine is a very clear and colourless liquid with ammonia like odor. 
The CAS number of Aminoethylethanolamine is 111-41-1. 
AB Enterprises Supply Aminoethylethanolamine with minimum 50 kg quantity.

AMINOETHYLETHANOLAMINE is a clear colorless liquid with an ammonia-like odor. 
Corrosive to tissue. 
Combustible, but may be difficult to ignite. 
Less dense than water. 
Vapors heavier than air. 
Toxic oxides of nitrogen produced during combustion. Used to make other chemicals.
Molecular Formula : C4H12N2O

Aminoethylethanolamine usages:
AMINOETHYLETHANOLAMINE is used as a chelating agent and in coatings to make additive for latex paints. 
Due to above property, Aminoethylethanolamine is used as detergent/cleaner/fabric softener. 
Aminoethylethanolamine is also used as a dispersal detergent additive for gasoline. 
Aminoethylethanolamine is used as a surfactant and as ash less dispersant in engine oil and other lubricant.

Aminoethylethanolamine Benefits:
-Consistent and predictable reaction products
-Easily derivatized
-Low vapor pressure
-High viscosity
-Low environmental impact
-Suitable for harsh conditions
-Low sensitivity

N-(2-Aminoethyl)ethanolamine (AEEA)
N-(2-Aminoethyl)ethanolamine (AEEA) is member from the class of Ethyleneamines and is used in a broad array of applications
2-[(2-aminoethyl)amino]-ethanol) is a single-component product. 
Used in chelating agents, fabric softeners, lube oil & fuel additives, surfactants, textile additives, urethane chemicals. 
Possesses water solubility.

Aminoethyl Ethanolamine is a hygroscopic liquid with a mild ammoniacal odor. 
Aminoethylethanolamine is miscible with water, ethanol, and acetone, but immiscible with ether, benzene, and hexane.
Aminoethyl Ethanolamine is used as an intermediate in the manufacture of surfactants, sequestering agents, cationic textile softeners, antistatic agents, corrosion inhibitors, and insecticides. 
Aminoethylethanolamine is also found in rubber products, resins, and certain medicinals.

Aminoethylethanolamine in Cleaning
N-(2-Aminoethyl)ethanolamine (AEEA) is mainly used as building block for fabric softeners/surfactants, which make the textiles less harsh, “softer” or more pleasing to the touch.

Aminoethylethanolamine in Coatings
For production of latex paints N-(2-Aminoethyl)ethanolamine (AEEA) acts as intermediate to form an adhesion monomer, which increases adhesion under damp conditions (wet adhesion).
Additionally, via the pendent amino and hydroxy functionalities, AEEA is used in urethane systems

Aminoethylethanolamine in Fuels and Lubricants
AEEA is used in the production of chlorinated polybutene based fuel additives as a dispersant-detergent additive.

Other applications of Aminoethylethanolamine:
N-(2-Aminoethyl)ethanolamine (AEEA) is formulated as an intermediate to form polycarboxylic acids and their salts, and chelating agents.
In several additional applications N-(2-Aminoethyl)ethanolamine (AEEA) is used as building block for synthesis.

Aminoethylethanolamine is a linear molecule with primary and secondary amine groups with chemical formula of C4H12N2O. 
Aminoethylethanolamine is a hygroscopic liquid containing minimal ethylenediamine impurity. 
Aminoethylethanolamine is also referred to as N-(2-Aminoethyl)ethanolamine, N-(2-Hydroxyethyl)ethylenediamine, 2-[(2-aminoethyl)amino], and N-(β-Hydroxyethyl)-Ethylenediamine. 
Aminoethylethanolamine possesses mild ammonia-like odor. 
Aminoethylethanolamine is a water-soluble, clear, colorless, and viscous liquid. 
Aminoethylethanolamine is miscible with water, ethanol, and acetone, but immiscible with ether, benzene, and hexane. 
Aminoethylethanolamine is widely used as an intermediate in the production of surfactants, sequestering agents, cationic textile softeners, antistatic agents, corrosion inhibitors, and insecticides.

Formula : HO-(CH2 )2-NH-(CH2)2-NH2
CAS Number : 111-41-1
Molecular Weight : 104.1
pH(25˚C aqueous solution : 11.5
Vapor pressure : < 0.01mmHg 20˚C
Vapor density : 3.59
Specific gravity : 1.82-281 25/25˚C
Boiling point : 243˚C

Aminoethylethanolamine (CAS #000111-41- 1, 2-[(2-aminoethyl)amino]-ethanol) is a single-component product, with minimal ethylenediamine impurity. 
Aminoethylethanolamine typically has an ammonia-like odor and is water-soluble, clear, colorless, and slightly viscous.

Ghelating agents
Fabric softeners
Lube Oil & Fuel additives
Textile additive
Urethane Chemical

Aminoethylethanolamine Properties: These values are not intended for use in preparing specifications.

Aminoethylethanolamine Applications:
AEEA is commonly used in the manufacture of lube oil additives, fuel additives, chelating agents, surfactants, fabric softeners and insecticides among other applications.

APPLICATIONS of Aminoethylethanolamine:
• Chelating agents
• Fabric softeners
• Lube oil and fuel additives
• Surfactants
• Textile additives
• Urethane chemicals

Preferred IUPAC name: 2-[(2-Aminoethyl)amino]ethan-1-ol
Other names: N-(2-Hydroxyethyl)ethylenediamine

Applications and Uses of Aminoethylethanolamine:
Aminoethylethanolamine is manufactured by Huntsman to be marketed as a chemical intermediate for the downstream manufacture of chemicals and products.
Aminoethylethanolamine has a variety of applications and is used in the production of fabric softener, textile additive, surfactants, chelating agents, lube oil and fuel additives and urethane chemicals. 
Huntsman does not market aminoethylethanolamine directly for consumer use.

InChI: InChI=1S/C4H12N2O/c5-1-2-6-3-4-7/h6-7H,1-5H2
CAS: 111411

Aminoethylethanolamine (AEEA)
Physical characteristic: Colorless Liquid      
Chemical formula:  C4H12N2O
Molecular weight: 104,20   g/mol

Aminoethylethanolamine is a linear molecule with a C4H12N2O the chemical formula in the primary and secondary amine groups. 
Aminoethylethanolamine is a hygroscopic liquid that contains minimal ethylenediamine impurity. 
Aminoethylethanolamine is often referred to as N-(2-aminoethyl)ethanolamine, N-(2 hydroxyethyl)ethylenediamine, 2-[(2-aminoethyl)amine] and N-(- -hydroxyethyl)-ethylenediamine. 
Aminoethylethanolamine has a faint ammonia-like scent. 
Aminoethylethanolamine is a water-soluble, clear, colorless, and viscous liquid. 
Aminoethylethanolamine is miscible with ethanol, water, and acetone but is immiscible with ether, benzene, and hexane.

Substance Type: Chemical Substance
Systematic Name: Ethanol, 2-[(2-aminoethyl)amino]-
CAS Number: 111-41-1
EPA Registry Name: N-Hydroxyethylethylenediamine
Molecular Weight: 104.15
Molecular Formula: C4H12N2O

AEEA (2-aminoethyl ethanolamine), is a very polar compound and is difficult to analyze as it is often irreversibly adsorbed on most columns. 
Agilent CP-Volamine provides high degree of inertness for symmetrical elution of this highly polar amine.

Aminoethylethanolamine reacts severely to acids. 
Aminoethylethanolamine dissolve in water, ethanol, ether, hexane, acetone and benzene.
Aminoethylethanolamine absorbs the carbon dioxide in the air.
Aminoethylethanolamine areas of usage:
Aminoethylethanolamine is used as a by-product in the sectors of textile, leather and glue.
Aminoethylethanolamine is used as the raw material of surface activators.
Aminoethylethanolamine is used as a detergent admixture.
Aminoethylethanolamine is used as an admixture in shampoos and lubricants and a resin material.

Alkanolamines have the combined physical and chemical characteristics of both alcohols and amines in one molecule, which makes them useful intermediates in the synthesis of various target molecules for the use in many diverse areas such as pharmaceutical, urethane catalysts, coatings, personal care, products, water treatments, corrosion inhibitors, and gas treating industries. 
There are 1°, 2º or 3º nitrogen atom and one hydroxyl group at least in alkanolamines. 
Alkanolamines react with inorganic acids carboxylic acids to form salts, soaps, esters, or amides. 
Alkanolamines are used in both water- based and solvent-based coatings to enhance the solubility, reducibility, pigment dispersing and pH stability. 
They are used in cathodic electrodeposition systems and as a catalyst for chain-extend. 

Alkanolamines are used to prepare surface-active soaps through reaction with fatty acids. 
Surface-active soaps are used commercially as a emulsifier, lubricants, detergents, pesticides and personal care products. 
Alkanolamines maintain a constant alkalinity in the boiling water flows and condensate not to form solid products which would impede line flow. 
This function of Aminoethylethanolamine is applied for corrosion Inhibits. 
Alkanolamines are widely employed in the preparation of  water soluble cationic flocculants and ion exchange resins which adsorb solid and colloidal particles by electrostatic attraction. 

Aminoethylethanolamines are used for water treatment industry. 
Alkanolamines and their derivatives are widely used as intermediates for the production of active pharmaceutical ingredients such as procaine, antihistamines analgesics from N,N-dimethylethanolamine or N-methyldiethanolamine. 
Alkanolamines are used to remove hydrogen sulfide (H2S) and CO2 gas from gas streams in natural and refinery gas operations. 
Aminoethylethanolamine which has amine groups and hydroxyl group is used as an important intermediate for polymer condensation, pharmaceuticals, agrochemicals, paper chemicals, rubber chemicals, textile auxiliaries. 
Aminoethylethanolamine is used to produce shampoo, cationic surfactants, antistatic agents and chelating agents.

Appearance: light yellow clear liquid
Assay %: ≥39.1%
Chroma(Hazen): 80
Chloride (Cl)%: 0.004
Sulfate(SO4)Content%: 0.01
PH 25℃1%solution: 11.51
Lead(Pb) %: 0.0002
Density (g/ml,25℃): 1.283
Chelating value(mgCaco3/g): 121

Other Names: 
Ethanol, 2-[(2-aminoethyl)amino]-;
Ethanolethylene diamine;
Hydroxyethyl ethylenediamine;
N-( β-Aminoethyl)ethanolamine;

Increase in demand for aminoethylethanolamine in textile and chemical processing industries is driving the global aminoethylethanolamine market. 
Aminoethylethanolamine is used as fabric softener to impart softness and antistatic properties during pre-treatment and post-treatment to fabrics. 
Aminoethylethanolamine is also employed as textile additive to enhance dye sorption, adhesion, flame proofing, abrasion resistance, and anti-static characteristics of textiles. 
Increase in usage of aminoethylethanolamine in the textile industry is expected to boost the global aminoethylethanolamine market during the forecast period. 
Demand for aminoethylethanolamine is anticipated to increase in the chemical processing industry in the next few years, as Aminoethylethanolamine is employed in the manufacture of polyurethane chemicals. 
Aminoethylethanolamine is used in the manufacture of polyols and catalysts. 
These polyols are primarily employed in urethane systems for appliances, spray foams, building panels, and elastomers.

Product name: Aminoethylethanolamine (AEEA)
Chemical family: Ethylene Amines
CAS number: 111-41-1
Physical form: Liquid
Chemical Formula: C₄H₁₂N₂O
Chemical name: 2-(2-aminoethylamino)ethanol
Molecular Weight: 104.15

Aminoethylethanolamine is used in the following products: polymers.
Aminoethylethanolamine has an industrial use resulting in manufacture of another substance (use of intermediates).
Aminoethylethanolamine is used for the manufacture of: chemicals.
Release to the environment of Aminoethylethanolamine can occur from industrial use: as an intermediate step in further manufacturing of another substance (use of intermediates) and as processing aid.

CAS Number: 111-41-1 
ChemSpider: 7821 
ECHA InfoCard: 100.003.516 
PubChem CID: 8112
CompTox Dashboard (EPA): DTXSID7025423

Aminoethylethanolamine Applications:
AEEA is used to manufacture wet-adhesion additives for latex paints, in the manufacture of fabric softeners, fuel additives and lube oil additives. 
AEEA is an intermediate in the manufacture of chelating agents and surfactants.

Chemical formula: C4H12N2O
Molar mass: 104.153 g·mol−1
Density: 1.03 g/cm3
Melting point: −28 °C (−18 °F; 245 K)
Boiling point: 243 °C (469 °F; 516 K)
Vapor pressure: 0.01 mmHg @ 20 °C ; 8.17x10−4mmHg @ 25 °C

Aminoethylethanolamine Applications :    
AEEA is used as a chelating agent and in coatings to make additive for latex paints.
Due to above property , Aminoethylethanolamine is used as a detergent/ cleaner/ fabric softener.
Aminoethylethanolamine is also used as a dispersal detergent additive for gasoline.
Aminoethylethanolamine is used as a a surfactant and as an ashless dispersant in engine oil and other lubricants.

Physical State (20°C): Liquid
Density (kg/m3): 1028 [Kg/m³] at a temperature of 20°C
Molar mass (g/mol): 104.15
Density of gas (kg/m3): 4.644
Boiling Point (°C): 243
Ignition Temperature (°C): 368
Flash Point (°C): 135
Lower explosivity limit (LEL) (volume %): 15
Upper explosivity limit (UEL) (volume %): 27

Ethanolethylene diamine
111-41-1 [RN]
2-[(2-Aminoethyl)amino]ethanol [ACD/IUPAC Name]
2-[(2-Aminoethyl)amino]ethanol [German] [ACD/IUPAC Name]
2-[(2-Aminoéthyl)amino]éthanol [French] [ACD/IUPAC Name]
203-867-5 [EINECS]
Aminoethylethanolamin [German]
Aminoethylethanolamine [Wiki]
Ethanol, 2-((2-aminoethyl)amino)-
Ethanol, 2-[(2-aminoethyl)amino]- [ACD/Index Name]
MFCD00008170 [MDL number]
1246819-88-4 [RN]
147770-06-7 [RN]
20261-60-3 [RN]
263-177-5 [EINECS]
263-179-6 [EINECS]
4-04-00-01514 [Beilstein]
51251-98-0 [RN]
59219-56-6 [RN]
61791-44-4 [RN]
61791-46-6 [RN]
66085-61-8 [RN]
8033-73-6 [RN]
Ethanolethylene diamine
ethylenediamine, N-(2-hydroxyethyl)-
Hydroxyethyl ethylenediamine
N-(2-Aminoethyl) ethanolamine
n-(2-hydroxyethyl)ethylenediamine, 99%

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.