BARDAC LF

Bardac-LF = Dioctyl dimethyl ammonium chloride
CAS No.: 5538-94-3

EC / List no.: 226-901-0
CAS no.: 5538-94-3
Mol. formula: C18H40ClN

Dimethyldioctylammonium chloride
dimethyldioctylammonium chloride

IUPAC names
Bardac LF
dimethyl-dioctylazanium chloride
Dimethyldioctyl ammonium chloride
dimethyl dioctyl ammonium chloride
dimethyldioctylazanium chloride
Dioctyldimethylammoniumchlorid
N,N-dimethyl-N-octyloctan-1-aminium chloride

Product Information
Bardac-LF
The Quat with unusual and exiting performance characteristics.
Lowest tendency to foam.
Broad spectrum of biocidal activity against both gram positive and gram negative organisms.
Algaestatic and algaecidal performance at economical use concentrations.
Toxicological and ecological documentation.

Bardac LF and LF-80 are composed of twin chain dimethyl ammonium chloride. 
The dioctyl dimethyl structure provides a controlled foam biocide, exhibiting low, fast breaking foam with exceptional dynamic controlled foam performance. 
When used as an active ingredient in FIFRA1 registered formulations such as hard surface disinfectants, sanitizers and/or certain types of water treatment formulations, these products have been found to provide superior biocidal action against a broad spectrum of microbial organisms such as: bacteria, fungi, viruses, and algae. 
This “third” generation quaternary ammonium compound delivers potent germicidal action in hard water and organic soil loads.

Typical Chemical Composition
Active Ingredients

Bardac LF = Dioctyl dimethyl ammonium chloride 50%
Ethyl alcohol: 10% 
Inert Ingredients
Water: 40%
Appearance : Clear, pale yellow to straw liquid
Color (APHA): 200 Max.
pH (10% solution): 6.5-9.0 
Flash Point (Setaflash, °F): 109
Average Molecular Weight: 312 
Specific Gravity @ 25°C: 0.93 
Density in lbs./gal.: 7.7
Freezing Point, °F :41


Bardac LF-80 = Dioctyl dimethyl ammonium chloride 80%
Ethyl alcohol: 10% 
Inert Ingredients
Water: 10%
Appearance: Clear, pale yellow to straw liquid
Color (APHA): 250 Max.
pH (10% solution): 6.5-9.0 
Flash Point (Setaflash, °F): 109
Average Molecular Weight: 312 
Specific Gravity @ 25°C: 0.90
Density in lbs./gal.: 7.5
Freezing Point, °F :50

Physical State
Clear, pale yellow to straw liquid with a mild odor. 
Congealing may occur during storage at low temperatures; this is reversible on warming with mixing.


Application
Bardac LF and LF-80 can be incorporated into a substantial number of EPA registered formulations.
These formulations include but are not limited to: disinfectants, sanitizers, and industrial water treatment


Dioctyl dimethyl ammonium chloride is composed of twin chain dimethyl ammonium chloride.
The dioctyl dimethyl structure provides a controlled foam biocide, exhibiting low, fast breaking foam with exceptional dynamic controlled foam performance. 
When used as an active ingredient in FIFRA1 registered formulations such as hard surface disinfectants, sanitizers and/or certain types of water treatment formulations, these products have been found to provide superior biotical action against a broad spectrum of microbial organisms such as: bacteria, fungi, viruses, and algae. 
This “third” generation quaternary ammonium compound delivers potent germicidal action in hard water and organic soil loads.

1. Active matter
N,N-Dioctyl-N,N-dimethylammoniumchloride
Active Substance: dioctyldimethyl ammonium chloride
Structural formula
R CH3 Cl -N+R CH3 R = C8 H17
1.1 CAS No.: 5538-94-3
1.2 EINECS No.: 226-901-0
1.3 UN No.: 2920

2. Specifications
2.1 Appearance at 20°C clear liquid
2.2 Colour, Apha 100 max.
2.3 pH 1% aqueous solution 6.5 - 8.0
2.4 Assay (Titration, MW 312) 50.0 - 52.0 %
2.5 free Amine + Amine HCl 1.0 % max.
2.6 Ash 0.8 % max.
2.7 Water, KF 36.0 - 40.0 %
2.8 Ethanol 8.0 % min.

3. Properties
3.1 Odour aromatic
3.2 Density 0.9320 g/cm3
3.3 Viscosity (Brookfield, sp.1, 5 rpm, 20°C) 22 mPa⋅s
3.4 Average Molecular weight 312
3.5 Flash Point (Abel Pensky cc) 50°C
3.6 Surface tension (1% aqueous solution) 32 mN/m
3.7 Ionogenicity cationic
3.8 Freeze thaw stability good
3.9 Solubility soluble in water
3.10 Compatibility not compatible with anionics
3.11 Setting point < 5°C
3.12 pH 10% aqueous solution 6.5 - 9.0

4. Registrations
4.1. Europe European Inventory of Existing Chemical Substances (EINECS)
4.1.1 Switzerland BAG T No. 37 774 / Toxicity class : 3
4.1.2 France Specified in positive list for use in food industry.
4.2 U S A Toxic Substances Control Act (TSCA) Inventory
FDA 21 CFR 178.1010 approval
4.3 Japan Japanese Handbook of Chemical Substances (Miti)
4.4 Australia Australian Inventory of Chemical Substances (AICS)

5. Antimicrobial efficacy
5.1 BACTERIA
The bactericidal efficacy has been tested and shown according to the following test procedures:
DGHM (Germany) -- AOAC (USA)
5.2 ALGAE
The algaecidal concentration of BARDAC-LF was shown to be 1- 5 ppm.

6. Other investigations
Information available upon request

7. Use areas
Disinfectant and disinfectant cleaner.
Agriculture applications, food and dairy industry.
Water treatment (swimming pools, cooling towers, etc).
Slimicide (paper industry).

8. Recommendations to formulate
Incompatible with anionic detergents.
Synergistic effects in combination with aldehydes and complexing agents (e.g. EDTA).

9. Analytical procedures
Titration (ISO 2871-2)

10. Storage
Product is supplied as follows:
Type: iron drum polyethylene drum IBC-container bulk
weight net: 30 kgs 190 kgs 850 kgs
It can be stored in the sealed original packaging over a period of two years.

11. Regulatory information
refer to MSDS

12. Toxicological information
refer to MSDS

13. Ecological and ecotoxicological information
refer to MSDS
The information contained herein is believed to be correct and corresponds to the latest state of scientific and technical knowledge.
However, no warranty is made, either expressed or implied, regarding its accuracy or the results to be obtained from the use of such
information. No statement is intended or should be construed as a recommendation to infringe any existing patent.

5538-94-3
Dimethyldioctylammonium chloride
N,N-Dimethyl-N-octyloctan-1-aminium chloride
Bisoctyl dimethyl ammonium chloride
Dioctyldimonium chloride
Dioctyldimethylammonium chloride
Querton 28CL
Dioctyl dimethyl ammonium chloride
1-Octanaminium, N,N-dimethyl-N-octyl-, chloride
Dodigen 2617
Caswell No. 392H
UNII-0X0RL40Y6H
Dimethyl dioctyl ammonium chloride
HOE-S 2617
EINECS 226-901-0
EPA Pesticide Chemical Code 069166
RC 5626
0X0RL40Y6H
1-Octanaminium, N,N-dimethyl-N-octyl-, chloride (1:1)
dimethyl(dioctyl)azanium;chloride
N,N-Dimethyl-N-octyl-1-octanaminium chloride
CAS-5538-94-3
NCGC00182056-02
NCGC00182056-03
Ammonium, dimethyldioctyl-, chloride
C18H40ClN
SCHEMBL33353
KSC494A8P
dioctyldimethyl ammonium chloride
Disoctyl Dimethyl Ammonium Chloride
Ammonium, dimethyldioctyl-, chloride (8CI)
Dimethyldioctylammonium chloride 


Bisoctyl dimethyl ammonium chloride
5538-94-3


Dimethyldioctylammonium chloride
DIOCTYL DIMETHYL AMMONIUM CHLORIDE
Bisoctyl dimethyl ammonium chloride
Disoctyl Dimethyl Ammonium Chloride
1-Octanaminium, N,N-dimethyl-N-octyl-, chloride
N,N-Dimethyl-N,N-dioctylammonium chloride
Dioctyl Dimethyl Ammonium Chloride--DODAC
Bardac LF
N,N-Dimethyl-N,N-dioctylammoniumchlorid (in 10% Ethanol/40% Water)
N,N-Dioctyl-N,N-dimethylammonium chloride
Bardac LF-70
N,N-Dimethyl-N,N-dioctylammoniumchlorid (in 10% Isopropanol/20% Water)
Bardac LF-80
N,N-dimethyl-N-octyl-1-octanaminium chloride
Octanaminium, N,N-dimethyl-N-octyl-, chloride
Dimethyldioctylaminium·chloride
Dioctyldimethylaminium·chloride
N,N-Dimethyl-N-octyl-1-octaneaminium·chloride
[EINECS(EC#)]: 226-901-0
[Molecular Formula]: C18H40ClN
[MDL Number]: MFCD01711139
[Molecular Weight]: 305.97
[MOL File]: 5538-94-3.mol
[Appearance]: Liquid
[Usage] : Bardac LF is a quaternary ammonium based antimicrobial used as a bacteriostat, disinfectant and/or a microbiocide.
Bardac LF is ideal for recirculating water systems where control of undesirable microbes without excessive foam is essential.

    
CAS No.5538-94-3
Chemical Name:Bisoctyl dimethyl ammonium chloride
SynonymsD821;Bardac(R) LF;Bardac(R) LF-70;Bardac(R) LF-80;Trospium Impurity 4 Chloride;Dimethyldioctylaminium·chloride;Dioctyldimethylaminium·chloride;DiMethyldioCLylaMMoniuM Chloride;Dimethyldioctylammonium chloride;dimethyl(dioctyl)azanium chloride


Bisoctyl dimethyl ammonium chloride Chemical Properties,Uses,Production
Chemical Properties
Liquid
Uses
Bardac LF is a quaternary ammonium based antimicrobial used as a bacteriostat, disinfectant and/or a microbiocide. 


Safety Profile
A poison by ingestion. When heated to decomposition it emits toxic vapors of NOx and Cl-.
Bisoctyl dimethyl ammonium chloride Preparation Products And Raw materials
 

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.