Fatty alcohol ethoxylate, modified
Disponil A 1080 is a 80 % liquid formulation showing a solidification point < 10 °C.
Fatty alcohol ethoxylates with linear structur usually build liquid-crystalline phases in the concentration range between about 30 and 60 % surfactant.
Above 60 % surfactant content these surfactant solutions are usually solid.
Features & Benefits of Disponil A 1080:
Disponil A types are modified ethoxylates of native fatty alcohols with improved process behavior in comparison to the standard fatty alcohol ethoxylates.
Disponil A 1080 is readily biodegradable.
Applications of Disponil A 1080:
Disponil A types:
Disponil A 1080
Disponil A 1580
Disponil A 3065
Disponil A 4065
Nonionic emulsifiers for the chemical industry and emulsion polymerization
Chemical nautre of Disponil A 1080:
The Disponil A types are modified ethoxylates of native fatty alcohols.
The general formular of the fatty alcohol ethoxylates is described as follows:
Solubility of Disponil A 1080:
As most linear fatty alcohol ethoxylates, the Disponil A types exhibit a phase behaviour when diluted with water.
The following diagram shows the pourpoint of dilutions with different active matter concentrations.
When diluting the products it should be ensured to stay at temperatures well above the pourpoint in order to avoid gel phases.
In addition it is recommended to add the products to the water phase.
Viscosity of Disponil A 1080:
The relationship of the viscosity as a function of temperature is always an important point to consider, as far as storage, shipping and dosage is concerned.
Dynamics of Disponil A 1080:
Dynamic surface tension is an indicative measure of the speed with which a surfactant can orientate at new interfaces.
This is particularly important, for example, during the dosing processes.
Storage of Disponil A 1080:
It is recommended to store the Disponil A types at temperatures above their pourpoints and at a maximum of 50 °C.
If the products are exposed to temperatures below their pourpoint they may form gels or become crystalline.
The products are not damaged by low temperatures, but they will become unpumpable and heterogeneous.
The homogeneous state is to be recovered by gentle heating and stirring at maximum 50 °C.
Materials of Disponil A 1080:
The following materials may be used for the storage of the Disponil A types:
- V4A-steel (1.4571)
Shelf life of Disponil A 1080:
The Disponil A types have a shelf life of at least 24 months, provided they are stored properly and drums are kept tightly sealed.
The pH value might drop throughout the storage time, which is a common phenomena of ethoxylated fatty alcohols.
This usually does not have a negative effect on the product quality.
If required the pH value may be increased by adding sodium hydroxyde solution.
Safety of Disponil A 1080:
We know of no ill effects that could have resulted from using the Disponil A types for the purpose for which they are intended and from processing them in accordance with current practice.
According to the experience we have gained over many years and other information at our disposal, the Disponil A types do not exert any harmful effects on health, provided that they are used properly, due attention is given to the precautions necessary for handling chemicals, and the information and advice given in our safety data sheets are observed.
About Disponil A 1080 Helpful information:
Disponil A 1080 is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 100 000 to < 1 000 000 tonnes per annum.
Disponil A 1080 is used by consumers, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
Consumer Uses of Disponil A 1080:
Disponil A 1080 is used in the following products: washing & cleaning products, plant protection products, fertilisers, lubricants and greases, air care products and polishes and waxes.
Other release to the environment of Disponil A 1080 is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).
Article service life of Disponil A 1080:
ECHA has no public registered data on the routes by which Disponil A 1080 is most likely to be released to the environment.
ECHA has no public registered data indicating whether or into which articles Disponil A 1080 might have been processed.
Widespread uses by professional workers of Disponil A 1080:
Disponil A 1080 is used in the following products: washing & cleaning products and polishes and waxes.
Disponil A 1080 is used in the following areas: formulation of mixtures and/or re-packaging, municipal supply (e.g. electricity, steam, gas, water) and sewage treatment and health services.
Disponil A 1080 is used for the manufacture of: chemicals. Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Formulation or re-packing of Disponil A 1080:
Disponil A 1080 is used in the following products: washing & cleaning products, lubricants and greases, metal working fluids, fertilisers and cosmetics and personal care products.
Release to the environment of Disponil A 1080 can occur from industrial use: formulation of mixtures, in processing aids at industrial sites and formulation in materials.
Uses at industrial sites of Disponil A 1080:
Disponil A 1080 is used in the following products: washing & cleaning products, metal surface treatment products, lubricants and greases and metal working fluids.
Disponil A 1080 is used in the following areas: formulation of mixtures and/or re-packaging and municipal supply (e.g. electricity, steam, gas, water) and sewage treatment.
Disponil A 1080 is used for the manufacture of: chemicals, machinery and vehicles and fabricated metal products.
Release to the environment of Disponil A 1080 can occur from industrial use: in processing aids at industrial sites, of substances in closed systems with minimal release and formulation of mixtures.
Manufacture of Disponil A 1080:
Release to the environment of Disponil A 1080 can occur from industrial use: manufacturing of the substance.
DISPONIL A 1080
DISPONIL A 1580
DISPONIL A 3065
DISPONIL A 4065
DISPONIL AFX 3070
DISPONIL AFX 4030
DISPONIL ALS 33 EVO
DISPONIL APG 215
DISPONIL APG 425
DISPONIL BES 20
DISPONIL EHS 47
DISPONIL FEP 3825 PN
DISPONIL FEP 3830 PA
DISPONIL FES 147
DISPONIL FES 27 EVO
DISPONIL FES 32 EVO
DISPONIL FES 61
DISPONIL FES 77
DISPONIL FES 993
DISPONIL LDBS 25 EVO
DISPONIL LDBS 55
DISPONIL LS 500
DISPONIL NRG 301
DISPONIL NRG 401
DISPONIL OC 25
DISPONIL OC 5
DISPONIL SDS 15 EVO
DISPONIL SDS 30 EVO
DISPONIL SDS G
DISPONIL SLS 101 SPEC EVO
DISPONIL SLS 124 G
DISPONIL SOS 842 EVO
DISPONIL SUS 87 SPECIAL
DISPONIL SUS IC 875
Akyporox RLM 100
Akyporox RLM 55
C12-14 alcs., ethoxylated
C12-14 fatty alcs., ethoxylated
Dehydol L 53
Dehydol LS 2
Dehydol LS 2DEO-N
Dehydol LS 3
Dehydol LS 3Deo
Dehydol LS 4
Dehydol LS 5
Dehydol LS 6
Dehydol LS 7
Dehydol LS 8
Dehymuls LS 9.5
Disponil A 1080
Disponil AFX 1080
Disponil AFX 1575
Disponil AFX 2075
Disponil AFX 3070
Disponil AFX 4030
Disponil AFX 4060
Ecolat KB 15
Ecolat KB 5
Ecolat KB 9
Elfapur LM 75
Empilan KB 12
Empilan KB 2
Empilan KB 6
Empilan KBE 2
Empilan KBE 21
Empilan KBE 3
Empilan KCL 7
Ethoxylated C12-14 alcs.
Ethoxylated C12-14 fattyalcs.
Ethoxylated alcohols, C12-14
Fatty alcs., C12-14, ethoxylated
Genapol LA 030
Genapol LA 040
Genapol LA 090
Genapol LA 110
Genapol LA 250
Genapor LA 030
Imbentin AG 124/75
Imbentin AG 124LS050
Imbentin AG 124S091