Drapex 39 is an epoxidized soy bean oil.
Drapex 39 is used as a non-toxic co-stabiliser in rigid and plasticised PVC and other chlorine containing polymers.
Drapex 39 offers improved weatherability.
CAS Number: 8013-07-8
Molecular Formula: C₅₇H₉₈O₁₂
Appearance: Colourless Thick Oil
Molecular Weight: 975.4
Drapex 39 is an epoxidized compound for a wide range of applications.
Drapex 392 is an epoxidized soybean oil vinyl additive.
Dosage of Drapex 39:
Recommended concentration is 1.0 – 3.0 phr.
Typical Physical Properties of Drapex 39:
Appearance: Slightly yellowish, medium viscosity liquid
Odor: Typical
Chemical Name:
Soya oil
Chemical Composition:
Epoxidized soyabean oil
Uses of Drapex 39:
Drapex 39 is an epoxidised soya bean oil, slightly yellowish, medium viscosity liquid with typical odour and FDA approved.
Drapex 39 is a non-toxic co-stabiliser used in rigid (based on calcium/zinc stabilisers) and plasticised PVC (stabilised with metal soaps) and other chlorine containing polymers.
Drapex 39 markedly improves the weatherability of PVC articles and acts as internal lubricant and plasticiser.
Properties of Drapex 39:
Appearance clear, yelllowish liquid
Acid number: <=0,6 mg KOH/g
Iodine number: <= 6,0 g I2/100 g
Oxirane Oxygen: 6,20 - 6,70 %
Refractive Index @ 20'C(72'F): 1,4720 - 1,4750
Color (Gardner): <=3
Dynamic viscosity at 20'C (72'F): 540 - 660 mPa*s
Density at 20'C (72'F): 0.993 - 0.997 g/ml
Regulatory Status of Drapex 39:
Drapex 39 is approved in most countries for food contact application of rigid and plasticized PVC.
Packaging and Handling of Drapex 39:
Drapex 39 is supplied in standard steel drums (contents 205 kg) which conform to the UN regulations concerning reuse and recycling.
Drapex 39 is also sold in IBC intermediate bulk containers (contents 1000 kg) as well as TCO (tank container, contents 20 tons) on request.
Road tankers may be used to deliver large quantities.
The recommended storage temperature of Drapex 39 is 15 - 30°C.
With temperatures of less than 15°C, precipitations may occur which can be re-dissolved by heating to 50°C.
Keep Drapex 39 containers dry and reseal tightly after use.
Applications of Drapex 39:
Drapex 39 is an organoleptically improved modification of Drapex 39.
Drapex 39 is used in calcium/zinc stabilized rigid PVC with the most stringent organoleptical requirements.
In mineral water with low carbon dioxide content the packaging material has an organoleptical influence on the contents of the container.
Drapex 39 has been especially developed to avoid this problem.
Drapex 39 is used as a non-toxic co-stabiliser in rigid and plasticised PVC and other chlorine containing polymers.
KEYWORDS:
8013-07-8, Thick Oil, Drapex 10.4, Drapex 392, Drapex 4.4, Drapex 6.8, Drapex Alpha 200C, Drapex Alpha 200, Drapex Alpha 210 , Drapex Alpha 220
Display Name:
Soybean oil, epoxidized
EC Number:
232-391-0
EC Name:
Soybean oil, epoxidized
CAS Number:
8013-07-8
Molecular formula:
Not necessary, substance is a UVCB.
IUPAC Name:
Soybean oil, epoxidized
Properties of Drapex 39:
Content min.: 96.0%
Stabilized with: 0.1% Drapex 39 (epoxidized soy bean oil)
Storage: stability of at least 12 months
REACH: SCC (handling as intermediate under strictly controlled conditions)
Chemical Name:
Soybean Oil Epoxide
Synonyms:
Soybean oil, epoxidized; ADK Cizer O 130L; ADK Cizer O 130P; ADK Cizer O 130PA; ADK Cizer O 130S; ADK Cizer O 13P; ATO Vikoflex 7170; Adekacizer O 130L; Adekacizer O 130P; Adekacizer O 130PA; Adekacizer O 130S; Admex 711; Agri-Pure Gold 750; Baerostab LSA; BioFlex ESBO; CP Cizer B 22; CP Cizer B 22D; CP Cizer B 22R; Changhe 8605; Chemicizer SE 100; D 130P; D 81; DK 82; Daimac S 300; Daimac S 300K; Dehysol D 81; Dehysol D 82; Doverfax 100; Drapex 39; Drapex 392; Drapex 6.8; Drapex 68; Drapex HSE; E 20; E 20 (oil); E 2000; E 2000H; EP 6; EP 6 (oil); ESBO; ESBO 132; ESBO-B 22; ESO; ESO (lubricant); ESO (plasticizer); ESOs; Ecepox PB 1; Ecepox PB 3; Edenol 9232; Edenol D 16; Edenol D 20; Edenol D 81; Edenol D 82; Edenol D 82H; Edenol D 82S; Embilizer NF 3200; Epocizer P 206; Epocizer W 1000; E
Storage of Drapex 39:
20°C, Inert atmosphere
Solubility:
Chloroform (Sparingly), Methanol (Slightly)
Category:
Building Blocks; Miscellaneous;
Applications of Drapex 39:
Drapex 39 (cas# 8013-07-8) is frequently used as an additive during poly(vinyl chloride) preparation, displacing harmful phthalates. Soybean Oil Epoxide has also been modified for lubricant formulations with improved oxidative stability and low pour point.
Application:
DRAPEX 39 is a non-toxic co-stabilizer used in rigid and plasticized PVC and other chlorinated polymers.
The stabilizing effect of DRAPEX 39 is based on its ability to “bind” hydrogen chloride.
As a co-stabilizer for organotin or metal soaps, Drapex 39 has a positive effect on long-term thermal stability. In addition, DRAPEX 39 significantly improves the weather resistance of PVC products.
As a fatty acid ester of DRAPEX 39 , it also acts as an internal lubricant and softener.
The concentration must be adapted to the formulation according to the expected effect.
In general, DRAPEX 39 cannot be used only as a single plasticizer, for a good result the amount of plasticizer should be 10 - 15%.
Rigid PVC:
When processing rigid PVC, DRAPEX 39 is used as a co-stabilizing internal lubricant.
DRAPEX 39 is particularly important in the production of non-toxic rigid PVC based on calcium/zinc stabilizer.
Only such stabilization provides adequate stabilization of rigid PVC compounds on equipment such as calenders and extrusion blow molding machines.
Plasticized PVC:
DRAPEX 39 is used as a co-stabilizer in all plasticized PVC stabilized with metallic soaps.
Description of Drapex 39:
Epoxidized soybean oil.
Dosage of Drapex 39:
Concentration for rigid PVC: 1.0 - 3.0 parts;
Concentration for plasticized PVC: 1.0 - 5.0 parts;
the content of the epoxidized compound must be consistent with the total content of the plasticizer.
Trade name:
Drapex 39
Drapex 391
Drapex 391
Drapex 6.8
Drapex 6.8
ESOPOL
ESOPOL LA
Epovinstab H800
Epovinstab H800 D
Epoxidized Soybean Oil
Epoxidized soyabean oil
Epoxol D60
Epoxol D65
Epoxol D65S
Ergoplast ES
KALFLEX 13
KALFLEX 14
KALFLEX 14 A
KALFLEX 14NP
KALFLEX 14OA
KALFLEX 14OP
Lankroflex E2307
MAKPLAST SN
MAKPLAST SNS
MERGINATE ESBO
Plasticizer E
SDB CIZER E-03
Drapex 10.4
Drapex 10.4 is an epoxy plasticizer in general, to enhance heat stability is widely recognized.
Drapex 10.4 is used in the development of rigid packaging.
Drapex 39
Drapex 39 is an epoxidized soy bean oil.
Drapex 39 is used as a non-toxic co-stabiliser in rigid and plasticised PVC and other chlorine containing polymers.
Drapex 392
Drapex 392 is an epoxidised soy bean oil vinyl additive.
Drapex 392 acts as a plasticizer.
Drapex 392 can act as a co-stabilizer, offering good weathering stability with BaZn or CaZn.
Drapex 4.4
Drapex 4.4 is an epoxidized octyl tallate plasticizer.
Drapex 4.4 imparts low temperature flexibility. Offers very good heat and light stability.
Drapex 4.4 can act as a co-stabilizer.
Drapex 6.8
Drapex 6.8 is epoxidized soybean oil.
Drapex 6.8 is used as a plasticizer in vinyl formulations.
Drapex 6.8 provides very good heat and light stabilizing performance and very good compatibility.
Drapex Alpha 200C
Drapex Alpha 200C is a highly efficient and bio-based primary plasticizer.
Drapex Alpha 200C is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon.
Drapex Alpha 200
Drapex Alpha 200 is a highly efficient and bio-based primary plasticizer.
Drapex Alpha 200 is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon.
Drapex Alpha 210
Drapex Alpha 210 is a highly efficient and bio-based primary plasticizer.
Drapex Alpha 210 is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon.
Drapex Alpha 220
Drapex Alpha 220 is a highly efficient and bio-based primary plasticizer.
Drapex Alpha 220 is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon.