ELTESOL SC 40

ELTESOL SC 40 = Sodium cumenesulfonate 40 % = Sodium Cumene Sulphonate = HYDROTOPE = SOLUBILIZER

ELTESOL SC 40 is an aqueous solution of a sodium cumene sulphonate. 
ELTESOL SC 40 acts as a hydrotrope and may be used to increase the solubility of other compounds. 
In conjunction with non-ionic surfactants ELTESOL SC 40 will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. 
ELTESOL SC 40 may also be used to reduce the viscosity of concentrated surfactants and formulations.

ELTESOL SC 40 is a solubilizer, coupling agent and cloud point depressant used in heavy duty cleaners, wax strippers and dishwashing detergents, oil field and metal working applications.

ELTESOL SC 40 (Sodium cumenesulfonate) is a solubilizer, coupling agent and cloud point depressant used in heavy duty cleaners, wax strippers and dishwashing detergents, oil field and metal working applications.

Sodium cumenesulfonate (ELTESOL SC 40) is a Hydrotrope, solubilizer, coupling agent, cloud point depressant, viscosity reducer, an anti-caking agent in powdered detergent.
Sodium cumenesulfonate is a hydrotope compound, which consists of a hydrophilic part and a hydrophobic part, similar to surfactants. 
These compounds can get dissolved in water. 
They are available in powder as well as liquid form. 
There are several advantages of sodium cumenesulfonate. 
ELTESOL SC 40 increases the solubility for less soluble organic matter; lowers the cloud point of aqueous formulated products, effectively promotes the compatibility of various ingredients present in a multicomponent system, and moderates the viscosity of aqueous formulated products. 
Sodium cumenesulfonate is used as a solubilizer and cloud point depressor in wax cleaners, air mist drilling, laundry washing, drilling fluids, stimulation fluids, anti-caking agents, and coupling agents in powdered detergents. 


ELTESOL SC 40 is a compound that solubilizes hydrophobic compounds in aqueous solutions by means other than micellar solubilization. 
Typically, ELTESOL SC 40 consists of a hydrophilic part and a hydrophobic part (similar to surfactants), but the hydrophobic part is generally too small to cause spontaneous self-aggregation. 
ELTESOL SC 40 does not have a critical concentration above which self-aggregation spontaneously starts to occur (as found for micelle- and vesicle-forming surfactants, which have a critical micelle concentration (cmc) and a critical vesicle concentration (cvc)). ,

Instead, some hydrotropes aggregate in a step-wise self-aggregation process, gradually increasing aggregation size. 
However, many hydrotropes do not seem to self-aggregate at all, unless a solubilizate has been added. 
Examples of hydrotropes include urea, tosylate, cumenesulfonate and xylenesulfonate.

The term hydrotropy was originally put forward by Carl Neuberg  to describe the increase in the solubility of a solute by the addition of fairly high concentrations of alkali metal salts of various organic acids. 
However, the term has been used in the literature to designate non-micelle-forming substances, either liquids or solids, capable of solubilizing insoluble compounds.

Applications
Hydrotropes are in use industrially and commercially in cleaning and personal care product formulations to allow more concentrated formulations of surfactants. 
About 29,000 metric tons are produced (i.e., manufactured and imported) annually in the US.
Annual production (plus importation) in Europe and Australia is approximately 17,000 and 1,100 metric tons, respectively.

Common products containing a hydrotropes include laundry detergents, surface cleaners, dishwashing detergents, liquid soaps, shampoos and conditioners.
They are coupling agents, used at concentrations from 0.1-15% to stabilize the formula, modify viscosity and cloud-point, reduce phase separation in low temperatures, and limit foaming.

ELTESOL SC 40
EC / List no.: 248-983-7
CAS no.: 28348-53-0
Sodium cumenesulphonate
sodium cumenesulfonate


ELTESOL SC 40 is also used in metal processing applications, oilfield applications, and hydrogen sulfide scavangers. 
Cost of ELTESOL SC 40 highly depends on the cost of raw materials. 
Volatilty in raw material prices is likely to hamper the ELTESOL SC 40 market in the near future. 
Heavy exposure to ELTESOL SC 40 may cause serious irritation of eyes, irritation of respiratory tract if inhaled, and other health hazards. 
Increasing industrialization and use of household detergents in emerging economies are factors likely to drive the demand for ELTESOL SC 40 during the forecast period.

Based on form, the global ELTESOL SC 40 market has been classified into powder form and liquid form. 
However, decline in research and development activities related to ELTESOL SC 40 is likely to hamper the market during the forecast period. 
The liquid form segment contributed a major share of the market in 2019 and is likely to dominate the market during the forecast period.

Based on application, the global ELTESOL SC 40 market has been segmented into industrial & institutional, household, oilfield, laundry & cleaning, and others. 
Use of ELTESOL SC 40 as a detergent and cleaner for household application is growing. 
The household segment contributed a major share of the market in 2019 and is likely to be a dominant segment during the forecast period. 
Industrial and institutional is another lucrative segment of the market. 
It is anticipated to witness moderate growth during the forecast period. 
Growing population leads to rapid increase in industrialization. 
This is a key factor expected to drive the ELTESOL SC 40 market during the forecast period. 
The industrial & institutional application segment is likely to register the maximum CAGR during the forecast period.

Asia Pacific constituted a major share of the global ELTESOL SC 40 market in 2019 and the trend is likely to be continue during the forecast period. 
The market in Asia Pacific is anticipated to expand at a rapid pace during the forecast period. 
Rising industrialization in emerging economies of the region is projected to raise the demand for ELTESOL SC 40 during the forecast period. 

ELTESOL SC 40 market in Europe and North America, which is already at a mature stage, is likely to witness sluggish growth during the forecast period. 
This factor is expected to propel the demand for ELTESOL SC 40 aids in Middle East & Africa during the forecast period.


Hydrotropes. 
Compounds known as hydrotropes are described as amphiphilic substances composed of both hydrophilic and hydrophobic functional groups.
The hydrophobic part of the molecule is a benzene substituted apolar segment (ie, methyl [common name: toluene], dimethyl [common name: Xylene], or isopropyl [common name: cumene] apolar segment). 

The hydrophilic, polar segment is an anionic sulfonate group accompanied by a counter ion (eg, sodium and ammonium). 
This segment is a comparatively short side chain. 
Commercial toluene(and cumene) sulfonates consist of mixtures of 3 isomers (ortho-,meta-, and para-). 
Commercial xylene sulfonic acid consists of mixtures of 6 isomers (ortho,ortho; meta,meta; para,para; ortho,meta; ortho,para; and meta,para).

ELTESOL SC 40 increases the solubility of less soluble substances (ie, surfactants) in aqueous solution. 
ELTESOL SC 40 has structures somewhat similar to surfactants, but they are not themselves surfactants. 
The main property of ELTESOL SC 40 is related to the minimum hydrotropic concentration, which is defined as the concentration at which ELTESOL SC 40 begins to aggregate.
ELTESOL SC 40 = Sodium Cumene Sulfonate inhibits the formation of surfactant liquid crystalline phases by forming mixed micellar structures with surfactants. 
Since the hydrotrope hydrophilic heads are large and their hydrophobic groups are small, they tend to form spherical rather than lamellar or liquid crystalline structures, therefore inhibiting the formation of the latter. 
This destruction or inhibition of the liquid crystalline phase increases the solubility of the surfactant in the aqueous phase and the capacity of its micellar solution to solubilize material

Method of Manufacture
Hydrotropes are produced by sulfonation of an aromatic hydrocarbon solvent (ie, toluene, xylene, or cumene).
The resulting aromatic sulfonic acid is neutralized using an appropriate base (eg, sodium hydroxide, ammonium hydroxide, potassium hydroxide, or calcium hydroxide) to produce the sulfonate or hydrotrope. 
The liquid product is produced in a closed system.

ELTESOL SC 40 is an hydrotope: A hydrotrope is a compound that solubilizes hydrophobic compounds in aqueous solutions by means other than micellar solubilization. 
Typically, hydrotropes like ELTESOL SC 40 consist of a hydrophilic part and a hydrophobic part (similar to surfactants), but the hydrophobic part is generally too small to cause spontaneous self-aggregation. 
Hydrotropes do not have a critical concentration above which self-aggregation spontaneously starts to occur (as found for micelle- and vesicle-forming surfactants, which have a critical micelle concentration (cmc) and a critical vesicle concentration (cvc)). 
Instead, some hydrotropes aggregate in a step-wise self-aggregation process, gradually increasing aggregation size. 
However, many hydrotropes do not seem to self-aggregate at all, unless a solubilizate has been added. 
Examples of hydrotropes include urea, tosylate, cumenesulfonate and xylenesulfonate.

EC / List no.: 248-983-7
CAS no.: 28348-53-0


Sodium cumenesulphonate
ELTESOL SC 40


IUPAC names
Benzenesulfonic acid, (1-methylethyl)-, sodium salt
sodium 2-phenylpropane-2-sulfonate
sodium 2-phenylpropane-3-sulfonate
SODIUM CUMENESULPHONATE
Sodium cumenesulphonate
sodium cumenesulphonate

Eltesol SC 40 F
ELTESOL SC 40,40%
ELTESOL SC 40 IN STOCK
ELTESOL SC 40 Factory
(1-methylethyl)-benzenesulfonicacisodiumsalt
Benzenesulfonicacid,(1-methylethyl)-,sodiumsalt
Sodium cumene sulphatee 40%
(1-METHYLETHYL)-BENZENESULPHONICACID,SODIUMSALT
Natriumcumolsulfonat
Ar-cumenesulfonic acid, sodium salt
Benzenesulfonic acid, (1-methylethyl)-, sodium salt (1:1)
Einecs 248-983-7
Sodium cumene sulfonate 10g [28348-53-0]
Eltesol SC93
Stepanate SCS 40
Sodium 2-isopropylbenzenesulfonate
Cumenesulfonic acid sodium salt, isomer mixture
(1-Methylethyl)-benzenesulfonic acid sodium salt
ELTESOL SC 40
Sodium Cumene Sulphonate 40
Sodium Cumenesulphonate 40% Solution
sodium 3-propan-2-ylbenzenesulfonate
Sodium isopropylbenzenesulfonate


Hydrotropes
Hydrotropes like ELTESOL SC 40 are used to adjust the viscosity in a formulation as well as enable control of foaming characteristics.

ELTESOL SC 40
ELTESOL SC 40

ELTESOL SC 40 is an aqueous solution of a sodium cumene sulphonate. 
This product acts as a hydrotrope and may be used to increase the solubility of other compounds. 
In conjunction with non-ionic surfactants, it will raise the cloud point of the solution allowing clear liquids to be obtained at higher temperatures, enabling additional control of the foaming characteristics and performance. 
It may also be used to reduce the viscosity of concentrated surfactants and formulations.

Synonyms:
     benzenesulfonic acid, (1-methylethyl)-, sodium salt
     benzenesulfonic acid, 3-(1-methylethyl)-, sodium salt
ar-    cumene sulfonic acid sodium salt
(1-    methyl ethyl) benzene sulfonic acid sodium salt
     sodium 3-(1-methylethyl)benzenesulfonate
     sodium 3-isopropylbenzenesulfonate
ar-    sodium cumene sulfonate
     sodium;3-propan-2-ylbenzenesulfonate
     stepanate SCS
     stepanate SCS-40
     stepanate SCS-40-E
     stepanate SCS-93

Sodium cumene sulphonate (SCS) is an anionic surfactant and acts as hydrotropes to modify solubilities, viscosities, and other properties of surfactants and surfactant formulations.  
SCS is produced by the sulphonation of cumene followed by neutralization with sodium hydroxide.  
Sulphonation step: involves the use of oleum, a solution of SO3 in sulphuric acid.  
Neutralization step:  The generated aromatic sulphonic acid is converted to their respective salts by neutralization with sodium hydroxide to produce the sodium sulphonate.    
The neutralization is conveniently done in water, since the sulphonates, and even more so the short alkyl chain hydrotropes, are generally water soluble to the extent of 30–50%.  
Post‐processing step: can involve a solvent extraction to remove sulphones and chemical bleaching.  
If solvent extraction is done, traces of solvent must be removed by distillation, usually as the azeotrope. 
For a low sulphate product treatment with lime may be necessary.  

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.