EMPILAN 2502 is a coconut diethanolamide produced by the direct amidation of coconut oil.
EMPILAN 2502 is a non-ionic surfactant.
EMPILAN 2502 is a thickening agent.
CAS Number: 8051 - 30 - 7
EC Number: 232 483 0
Molecular Weight: 530.871
Exact Mass: 526.835266
Synonyms: 68603-42-9, Coconut diethanolamide, Amides, coco, N,N-bis(hydroxyethyl), Coconut oil acid diethanolamine, Alkanolamide of coconut oil fatty acids and diethanolamine, Amides, coco, N,N-bis(2-hydroxyethyl), N,N-Bis(hydroxyethyl) coco amide, N,N-Bis(2-hydroxyethyl) coconut oil amide, N,N-Bis(2-hydroxyethyl)cocoamide, N,N-Bis(2-hydroxyethyl)coconut fatty acid amide, N,N-Bis(2-hydroxyethyl)coconut oil amide, CCRIS 4601, Clindrol 200CGN, Clindrol 202CGN, Cocamide dea, Coconut acid, diethanolamide, Coconut fatty acid amide of diethanolamine, Coconut fatty acid diethanolamine condensate, Coconut fatty acids diethanolamide, Coconut oil acid, diethanolamide, Coconut oil acid diethanolamine (con 2/1), Coconut oil acids, diethanolamide, Coconut oil acids, diethanolamine condensate, Coconut oil amide, N,N-bis(2-hydroxyethyl)-, Coconut oil, diethanolamide, Coconut oil fatty acid diethanolamide, Coconut oil fatty acids, diethanolamide, Diethanolamine, coconut fatty acids condensate, EINECS 271-657-0, Ethylan LD, HSDB 4209, NCI-C55312, Ninol 2012E, Clindrol 206CGN, Agent 565-14RC, Alkamide 2104, Alkamide CDE, Alkamide DC 212S, Amides, N,N-bis(hydroxyethyl) coco, Amidet B 112, Aminol HCA, Amisol CD, Amisol CD-E, Arcalon 12, Calamide C, Calimide C, Carsamide CA, Cedemide DX, Clindrol Superamide 100CG, Cocamide diethanolamine, Coco diethanolamides, Coconut DEA, Comperlan KD, Comperlan LS, Comperlan PD, Conco Emulsifier K, Crillon CDY, Cyclomide CD, Empilan 2502, Empilan CDE, Empilan CDE/FF, Ethylan A 15, Foamid C, Foamole 2AC, Homelead CD, Lauridit KDG, Marlamid D 1218, Mazamide 80, Monamid 150AD, Monamid 150DR, Monamid ADD, Monolube 29-78, N,N-Bis(hydroxyethyl coco amides, Naxonol CO, Naxonol RN 66, Cedemide CX, Coconut oil acids diethanolamide, Coconut oil diethanolamide, Coconut oil fatty acid, diethanolamide, Coconut oil fatty acids diethanolamide, Cocamides diethanolamines, (Coco alkyl)diethanolamides, Cocoyl diethanolamide, Coconut oil acid diethanolamine condensate, Amides,coco,N,N-bis(hydroxyethyl);Amides,coco,N,N-bis(hydroxyethyl), Ninol 2012E, Ethylan LD, Varamide A 2, P and G Amide 72, Witcamide 5133, Purton CFD, Schercomid CDA, Steinamid DC 212SE, Lauridit KDG, Empilan CDE, Ethylan A 15, Ninol 2012 Extra, Foamole 2AC, Steinamid DC 212S, Monamid 150DR, Comperlan PD, Clindrol Superamide 100CG, Conco Emulsifier K, Ninol P 621, Marlamid D 1218, Witcamide 82, Comperlan LS, Comperlan KD, Ninol 1281, Elromid KD 80, Cocamide DEA, Cocamide diethanolamine, Coco fatty acid diethanolamides, Calamide C, Monolube 29-78, Monamid ADD, Amisol CD-E, Coconut diethanolamides, Coconut DEA, Coco diethanolamides, Empilan CDE/FF, Standamid SD, Ninol 49CE, Cedemide DX, Standamid KD, Cedemide CX, Carsamide CA, Alkamide CDO, Rewomid DL 240240, Clindrol 206CGN, Clindrol 200CGN, Amisol CD, Amidet B 112, Schercomid SCO, Ninol 11CM, Aminol HCA, Cyclomide CD, Alkamide CDE, Naxonol PN 66, Naxonol CO, Monamid 150AD, Varamide A 10, Crillon CDY, Homelead CD, Alkamide 2104, Varamide MA 1, Stafoam DF, Rolamid CD, Nissan Stafoam DF, Profan 128 Extra, Profan Extra 24, Alkamide DC 212S, Calimide C, N,N-bis(hydroxyethyl) coco amides, Arcalon 12, Stafoam DF 4, Oramix DL 200, Mazamide 80, Profan EX 24, Empilan 2502, Standamid KDO, Agent 565-14RC, Foamid C, Comperlan COD, Vicamid 528, Monamid 705, Rewomid DC 212S, Standamid SD-K, Ninol 40CO, Ninol 40CET, Amidet SB 13, CDE 100, Stafoam DFC, Adekasol COA, Tohol N 220XM, Coconut oil diethanolamides, Colamid C, Eur-Amid, 8036-48-4, 8040-31-1, 8040-33-3, 12751-06-3, 53028-62-9, 56448-72-7, 56832-66-7, 63091-31-6, 66984-58-5, 67785-10-8, 67785-14-2, 71343-51-6, 71343-71-0, 83652-14-6, 87714-18-9, 90651-47-1, 118104-13-5, 153189-69-6, 186615-78-1, 32712-02-7, 1430328-98-5, 1591830-58-8
EMPILAN 2502 is used as a non-ionic surfactant in cosmetic and detergent formulations.
EMPILAN 2502 is used as a foam modifier and stabilizer in detergent formulas as well as a viscosity modifier in shampoos, bubble baths etc.
EMPILAN 2502 is a very good solubilizer of perfumes and essential oils and allows the incorporation of these into aqueous systems.
EMPILAN 2502 contains free glycerin which allows easier cold handling and storage compared to fatty acid derived alkylolamides.
EMPILAN 2502 is used to increase the stability and volume of the foam, also in the presence of hard water and soap.
EMPILAN 2502 is useful for dissolving a wide variety of perfumes and non-polar compounds.
EMPILAN 2502 contains glycerol.
EMPILAN 2502 is coconut diethanolamide produced by the direct amidation of vegetable oil and EMPILAN 2502 therefore contains residual glycerol.
EMPILAN 2502 is a very good foam-boosting/stabilising agent when used in conjunction with anionic surfactants, such as lauryl sulphates and lauryl ether sulphates.
EMPILAN 2502 also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilise oils and perfumes during formulation.
EMPILAN 2502 acts a surfactant.
EMPILAN 2502 boosts stability and volume of foam also in presence of hard water and soap.
EMPILAN 2502 is useful to solubilize a wide range of perfumes and active ingredients.
EMPILAN 2502 is used in shower and bath products, creams and lotions, shampoo and liquid soaps.
EMPILAN 2502 is a very good foam-boosting/stabilizing agent when used in conjunction with anionic surfactants.
EMPILAN 2502 also provides an efficient means of increasing the viscosity of liquid formulations and can be used to pre-solubilize oils and perfumes during formulation.
Applications of EMPILAN 2502:
EMPILAN 2502 is a very good foam-boosting/stabilising agent when used in conjunction with lauryl sulphates and lauryl ether
sulphates in liquid formulations.
Some examples of these are:
Shampoo formulations,
Bath formulations,
Detergent formulations.
EMPILAN 2502 also improves the texture of the foam.
The use of EMPILAN 2502 provides an efficient means of increasing the viscosity of liquid formulations.
EMPILAN 2502 can be used as solubiliser for perfumes and essential oils in cosmetic formulations.
Wetting Ability of EMPILAN 2502:
The wetting ability was determined by the method ISO 8022 “Determination of wetting power by immersion”, commonly referred to as the Draves wetting test.
The results are expressed as the time elapsed, in seconds, measured at 25°C, with shorter wetting times indicating more efficient wetting agents.
Foam Characteristics of EMPILAN 2502:
The foam characteristics were determined by the ASTM standard D1173, Ross & Miles foam test method.
The tests were carried out at a concentration of 1g/L in hard water and readings are expressed as volume of foam in mL, in seconds, at 25°C, at 0 seconds, then again after 60 and 300 seconds.
Preservation of EMPILAN 2502:
EMPILAN 2502 does not contain a preservative as EMPILAN 2502 is relatively resistant to microbial contamination.
When EMPILAN 2502 is diluted or incorporated into a formulation we recommend the addition of a preservative approved by the appropriate legislation.
Storage and Handling of EMPILAN 2502:
The recommended storage temperature is between 10°C and 40°C.
Avoid prolonged heating above 40°C as colour deterioration may occur.
Liquid alcohol ethoxylates are prone to separate and eventually solidify at low temperatures, particularly during prolonged storage.
In this case, EMPILAN 2502 is recommended that EMPILAN 2502 should be re homogenised before use.
This is readily achieved by heating EMPILAN 2502.
The clear point is the minimum temperature at which a homogenous solution can be expected.
Alcohol ethoxylates are chemically stable for at least 12 months in their original packaging.
Exposure to the atmosphere can cause EMPILAN 2502 to discolour with time, although this will not normally affect the performance.
Excess alkali and heat are both factors that will accelerate discolouration and EMPILAN 2502 is recommended not to store these products at elevated temperatures for prolonged periods, especially if colour is critical to the application
Standard Pack Sizes of EMPILAN 2502:
EMPILAN 2502 can be delivered in bulk road tankers of upto 23 tonnes nett, although smaller road tanker deliveries may be available upon request.
EMPILAN 2502 may also be available in 1 tonne semi bulk containers.
Open top plastic drums of approximately 220 kilos nett and bung type plastic drums of approximately 210 kilos nett.
Smaller pack sizes may be available upon request.
First Aid Measures of EMPILAN 2502:
Inhalation:
Provide rest, warmth and fresh air.
When breathing is difficult, properly trained personnel may assist affected person by administering oxygen.
Get medical attention if any discomfort continues.
Ingestion:
Immediately rinse mouth and provide fresh air.
Drink plenty of water.
Never give liquid to an unconscious person.
Do not induce vomiting.
If vomiting occurs, the head should be kept low so that stomach vomit doesn't enter the lungs.
Get medical attention if any discomfort continues.
Skin Contact:
Promptly flush contaminated skin with water.
Promptly remove clothing if soaked through and flush the skin with water.
Wash contaminated clothing before reuse.
Get medical attention if any discomfort continues.
Eye Contact:
Immediately flush with plenty of water for up to 15 minutes.
Remove any contact lenses and open eyes wide apart.
Get medical attention immediately.
Continue to rinse.
Fire-Fighting Measures of EMPILAN 2502:
Extinguishing Media:
Use fire-extinguishing media appropriate for surrounding materials.
Specific Hazards:
Fire Creates:
Oxides of:
Carbon.
Sulphur.
Protective Measures In Fire:
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Eelease Measures of EMPILAN 2502:
Environmental Precautions:
Avoid discharge into drains, water courses or onto the ground.
Spill Clean Up Methods:
Dam and absorb spillage with sand, sawdust or other absorbent.
Collect in containers and seal securely.
Identifiers of EMPILAN 2502:
CAS N°: 8051 - 30 - 7
E.I.N.E.C.S. N°: 232 483 0
INCI Name : Cocamide DEA
Molecular Weight: 530.871
Exact Mass: 526.835266
Properties of EMPILAN 2502:
Colour: Yellow
Odour: Faint, characteristic
Density at 20°C: 1.0 g/cm3
Glycerol content: 9.5%
Appearance at 25°C: Viscous liquid
Water content: 0.5 % max.
Free amine (MMW 105): 5.0% max.
Ester content: 6.0% max
Free Alkalinity: 2.0 mg KOH /g max
XLogP3: 0.00000
Boiling Point: 168-274 ºC
Water Solubility: 5-10 g/100 mL at 18 ºC
Other EMPILAN Products:
EMPILAN 2502/MB
EMPILAN CIS
EMPILAN CME/T
EMPILAN EGMS
EMPILAN KA 5
EMPILAN KBE 2
EMPILAN KBE 21
EMPILAN KBE 3
EMPILAN KBE 7
EMPILAN KCL
EMPILAN KCL 7/9
EMPILAN KCL 9/85
EMPILAN KCL 11
EMPILAN KCL 11/90
EMPILAN KI 6
EMPILAN KI 6.5
EMPILAN KI 8
EMPILAN KI 10
EMPILAN KM 20/FK
EMPILAN KM 25/FK
EMPILAN KM 25/PW
EMPILAN KM 50/FK
EMPILAN KM 50/PW
EMPILAN KM 80/PW
EMPILAN KR 2.5
EMPILAN KR 5
EMPILAN KR 6
EMPILAN KR 6/90
EMPILAN KR 8
EMPILAN KT 7/80
EMPILAN MAA/SI
EMPILAN ME10-CN
EMPILAN PF 7169