Genapol X 407
Genapol X 407 is used as nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates and vinyl acetate.
Composition:  Isotridecyl polyethylene glycol ether with 40 mole ethylene glycol

Genapol X 407 is an isotridecyl polyethylene glycol ether with 40 mole ethylene oxide. Acts as an emulsifier. It is APEO-free and has low VOC.
 Genapol X 407 is listed on FDA, European registration Directive 10/2011, German BfR2, AICS, DSL, EINECS, ENCS, IECSC, KECI, NECI, NZIoC, PICCS and TSCA inventory.
The use of Genapol X 407 offers the following advantages:

Product properties:

low VOC
free of alkylphenol ethoxylates (APEO)
hazard label free
readily biodegradable
easy to handle (liquid material; soluble in water)
FDA approved

Performance in emulsion polymerization:

maintains low viscosity of polymer emulsion at different shear rates
enhanced electrolyte stability
improved shelf life (high freeze thaw stability)

Product group:     Fatty alcohol ethoxylate
Active content:    70%
Appearance:    clear, colorless liquid
pH value:    6 - 8 
Solubility:    soluble in water
Density:    approx. 1.09 g/cm3 
Viscosity:    approx. 2300 mPas 
Flash point:    > 100 °C
HLB value:    18

Nonionic emulsifier for emulsion polymerization
Composition:  Isotridecyl polyethylene glycol ether with 40 mole ethylene glycol

Active substance content :About 70% with 30% water
At 5°C: clear, colourless paste
At 25°C: clear, colourless liquid
At 50°C: clear, colourless liquid
pH value (DIN EN 1262),5 % as is in water: 6.0 – 8.0
Density at 20°C:  Approx. 1.09 g/cm³
Viscosity at 25°C (Brookfield DV II, Spindle 4) :About 2300 mPa*s
Flash point (DIN/ISO 2592): > 100°C
Cloud point (1% active substance in 10% aqueous NaCl-solution): Approx. 78°C
Solubility at 20°C :Soluble in water
HLB value :About 18
Naturally derived carbon content: None

The use of Genapol X 407 in emulsion polymerization of vinyl acetate, acrylate and acrylate / styrene dispersions reduces coagulation, improves electrolyte
resistance and freeze/thaw stability.
Genapol X 407 is added to the emulsion either before, during or after the polymerization process.
Storage and Shelf Life: Please keep the product in a dry and clean place. Below 15°C  Genapol® X 407 starts crystallisation, after heating up at 40°C Genapol® X 407 
turns into a clear liquid again. The shelf life is at least two years when stored in tightly closed containers at 20-25°C in a clean and aerated place. After this period
the product should be analyzed for extension of the shelf life.
Preservation: No preservative is added.
Safety: Please see Material Safety Data Sheet before handling the material.

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.