Mergal K10N by Troy Corporation is a non-skin sensitizing benzisothiazolinone formulation. It is a VOC-free, liquid bactericide/fungicide. Acts as an in-can preservative for control of bacteria, yeast and fungi. Mergal® K10N is used in waterborne paints, stucco/masonry coatings, EIFS coatings and other coating products where water is a component.
MERGAL K10N is a benzoisothiazolinone compound primarily used for in-can protection that is VOC free.
Mergal K10N is a non-skin sensitizing BIT (Benzisothiazolinone) formulation.
Mergal K10N is an industrial preservative used to prevent deterioration and degradation caused by bacteria and fungi in aqueous systems.
MERGAL K10 N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems.
MERGAL K10 N provides long-term wet-state (in-can) preservation. The product offer excellent stability and compatibility even with difficult formulations/systems.
MERGAL K 10 N
Industrial Preservative To Prevent Deterioration and Degradation Caused By Bacteria and Fungi in the Following Aqueous Systems:
Adhesives, Caulks, Inks,Joint Cements, Metalworking Fluids, Mineral and Pigment Slurries, Oil-WaterEmulsions, Paints and Coatings, Plasters, Polymer Emulsions And Dispersions,Sealants, Textile Coatings, Thickeners, Household, Industrial and Janitorial Products (solid and liquid): Car Care Products, Floor Cleaners, Laundry Additives Including Liquid Laundry Detergents, Fabric Softeners And Stain Removers, Polishes And Surface Cleaners and Waxes.
ACTIVE INGREDIENT: % Weight
INERT INGREDIENTS 90.5%
EPA Reg. No.
EPA Establishment Number
DIRECTIONS FOR USE
It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
MERGAL K10N is an industrial preservative used to prevent deterioration and degradation caused by bacteria and fungi in aqueous systems.
Mergal K10N is suitable for a wide range of conditions and can be used at pHs of 3-13.
Since Mergal K10N contains no organic solvents, it is especially suited for applications where VOC is a concern.
Mergal K10N can be added at any stage of production, but it is recommended that the addition be made to the water in the beginning of the process.
Note: Strong oxidizing agents such as peroxides can inactivate Mergal K 10N.
Use rates are provided, but jaboratory/field trials are suggested in order to determine the most appropriate rate of use within the range specified on this label.
For Polymer Emulsions & Dispersions, Coatings, Caulks, Sealants, Adhesives,Mineral & Pigment Slurries, Oil-Water Emulsions, Spin Finish Solutions for Textile Industries, Inks, Metalworking Fluids, Thickeners, Joint Cements, Paints and Plasters:
Use 0.05 - 0.5 % Mergal K10N by weight based on the total weight of the final formulation.
Mergal K10N is a VOC-free, water-based preservative to prevent deterioration and degradation caused by bacteria and fungi.
For use in water-borne adhesives, sealants, and pigment slurries.
In ceramics it is useful in bodies and glazes.
This low viscosity solution is free of solvents and surfactant and is convenient to handle year-round.
Add as early in production as possible.
Typical Dose: 0.05 wt. % – 0.4 wt. % (in-package protection)
Applicable to products with a range of pH 3 – 13
Heat stable to 100° C
Biocide: These are added to glazes and bodies to prevent the growth of micro organisms. Often targeted at bacteria, mold or fungi.
Benzoisothiazol-3-one is an organic heterobicyclic compound based on a fused 1,2-thiazole and benzene bicyclic ring skeleton, with the S atom positioned adjacent to one of the positions of ring fusion.
Mergal K 10N has a role as a disinfectant, a platelet aggregation inhibitor, an environmental contaminant, a xenobiotic, a drug allergen and a sensitiser.
It is an organonitrogen heterocyclic compound and an organic heterobicyclic compound.
Troy Chemical Company - Preservatives is a developer and manufacturer that supplies performance materials used in the Paint and Coatings industry. This company produces an extensive range of cost –effective and environmentally friendly products including performance additives and preservatives. These products can be used for in-can preservation, dry-film preservation, and in-package preservation.
Proxel XL 2
Caswell No. 079A
Caswell No. 513A
EPA Pesticide Chemical Code 098901
Proxel Ultra 5
Proxel Press Paste
Acticide BW 20
Nipacide BIT 20
Parmetol B 70
Parmetol D 11
Proxel HL 2
Denicide BIT 20N
Koralone B 119
Nipacide BIT 10W
Preventol BIT 20D
Proxel BD 20
Proxel Press Paste D
Bioban BIT 20DPG
Canguard BIT 20DPG
SD 202 (bactericide)
Canguard Ultra BIT 20LE