Combination of: 
1,2-Benzisothiazolin-3-one (BIT)
2-Methylisothiazolin-3-one (MIT) 

Nipacide BSM is an In-can biocide based on BIT/MIT.
Nipacide BSM is a mixture of isothiazolinones. 
Nipacide BSM acts as an in-can biocide based on BIT/MIT. 

Nipacide BSM is APEO-free and has low VOC. 
Nipacide BSM offers good temperature and pH stability. 
Nipacide BSM is used for water-borne decorative paints and pigment preparations.

Benefits of Nipacide BSM:
-Low VOC
-APEO Free
-Solvent Free
-pH Stable
-Temperature Stable

Product Function: Industrial biocide
Chemical Type: Biocide formulations

Applications of Nipacide BSM:
Nipacide BSM is recommended for preservation of a wide range of applications including water based, casein, and PVA adhesives. 
Polymer emulsions including, SBR latex, Polyvinyl acetate and acrylic. 
Water based decorative paints, household products including dishwashing liquids, car care products, metal working fluids, Calcium Carbonate and Kaolin mineral slurries. 
Nipacide BSM is effective against a wide range of spoilage organisms and effective up to pH 10 and temperature stable up to 60°C.
At recommended use concentrations there is no requirement to label as skin sensitizer R43.

Applications of Nipacide BSM:
-Emulsion polymerization
-Pigment preparation
-Waterborne paints
-Decorative paints
-In-can preservation

Description of Nipacide BSM:
Nipacide BSM is an, isothiazolinone blend, water based, low toxicity biocide, developed for the complete in-can protection of water based products. 
Nipacide BSM is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. 
Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically. 

Example of the numbers of bacteria able to grow in products if left unpreserved:
• Time = 0 mins 1
• Time = 40 mins 4
• Time = 3 hrs 1024
• Time = 5 hrs 16,384
• Time = 7 hrs 1,048,576
• Time = 10 hrs 107,000,000,000

Time = 24 hrs

Nipacide BSM is an In-can biocide based on BIT/MIT.

1,2-Benzisothiazolin-3-one (BIT), 2-Methylisothiazolin-3-one (MIT) , Nipacide, Low VOC, APEO Free, Solvent Free, pH Stable, Temperature Stable, Bactericide, Fungicide

Nipacide BSM is an In-can biocide based on BIT/MIT.
Function: Anti-Microbial Agent, Biocide, Fungicide, Bactericide
Chemical Family: Blends & Combinations
End Uses: Waterborne Coating
Labeling Claims: APEO-free, Solvent-free, Low VOC

Use level of Nipacide BSM:
Nipacide BSM should be evaluated in finished products at levels between 0.10 % and 0.40 %.

Microbiological data:
Nipacide BSM has a broad spectrum of activity which is demonstrated by the following MIC data.

MIC Levels Organism MIC (ppm)
-Pseudomonas aeruginosa 500
-Pseudomonas putida 500
-Proteus vulgaris 200
-Escherichia coli 200
-Staphylococcus aureus 200

-Aspergillus niger 800
-Penicillium mineoluteum 500
-Fusarium solani 300
-Geotrichum candidum 1000

-Candida albicans 500

VOC-free mixture of 1,2-Benzisothiazolin-3-one (BIT) & 5-Chloro-2-methyl-isothiazolin-3-one and 2-Methyl-isothiazolin-3-one (CMIT / MIT). 
Nipacide BSM acts as an in-can biocide/fungicide/bactericide. 
Nipacide BSM prevents microbial growth. 
The recommended dose of Nipacide BSM level is 0.2-0.4%. 
Nipacide BSM complies with following regulations: FDA 175.105, FDA 176.170, FDA 176.180, BfR XIV, BfR XXXVI, EU directives 1999/13EC, EU directives 2004/42/EC and Blue angel (RAL-UZ-102).

In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal contamination, can result in:
• Loss of viscosity
• Gassing
• Discoloration
• Bad odors
• Product splitting
• Loss of adhesion
• Production clean down and production down time
• Loss of profit 

The mixed Inoculum of bacteria, used is as follows :
Pseudomonas aeruginosa
Alcaligenes faecalis
Proteus vulgaris
Escherichia coli

The mixed Inoculum of fungi and yeast used is as follows :
Fusarium solani
Geotrichum candidum
Aspergillus terreus
Rhodotorula rubra
Saccharomyces cerevisiae

Chemical compatibility of Nipacide BSM:
Nipacide BSM is compatible with most raw materials used in the manufacture of industrial products. 
Nipacide BSM compatibility should always be checked and evaluated before use.

Technical Service:
Technical service is available to assist customers in the determination of the optimum use level of biocide required to fully protect their product. 
A dedicated team of microbiologists are on hand at all times to assist customers with technical enquiries relating to product protection. 
Full microbiological efficacy testing is available.

Regulations and approvals:
BfR XIV Plastic dispersions
BfR XXXVI Preservative for Paper and Board
RAL UZ-102 1,2-Benzisothiazolin-3-on and 2-Methylisothiazolin-3-on are listed.

Use biocides safely. 
Always read the label and product information before use.

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.