NIPACIDE FC


Nipacide FC

Chemical name:1,6-dihydroxy-2,5-dioxahexane


Chemical characterization
1,6-dihydroxy-2,5-dioxahexane

CAS number : 3586-55-8
EINECS number : 222-720-6

Hazardous ingredients
1,6-Dihydroxy-2,5-dioxahexane
Concentration : 100 %
CAS number : 3586-55-8
EINECS number : 222-720-6

Hazard symbols Xn
R phrases 22

Synonyms: Ethylene Glycol Bis(semiformal);Dimethylol Glycol;2-(Hydroxymethoxy)ethoxymethanol;Ethyleneglycolbis(semiformal);(1,2-Ethanediylbis(oxy))bismethanol;(ethylenedioxy)dimethanol

(Ethylenedioxy)dimethanol
EDDM
Formaldehyde Condensate
Dimethylol glycol
3586-55-8
UNII-Y772Z5O19G
1,2-Bis[hydroxymethoxy]ethane
Ethylene glycol bis(semiformal)
2-(hydroxymethoxy)ethoxymethanol
1,2-Bis(hydroxymethoxy)ethane
1,6-dihydroxy-2,5-dioxahexane
1,6-dihydroxy-2,5-dioxyhexane
Y772Z5O19G
dimethanol
EINECS 222-720-6
(1,2-Ethanediylbis(oxy))bismethanol
Methanol, (1,2-ethanediylbis(oxy))bis-
SCHEMBL561721
DTXSID5041225
CTK8E2775
ZINC1849877
SC-88093
W-109911
Q2729433

Description;
Nipacide FC is water based low toxicity formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. 
Nipacide FC is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. 
Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.


In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal contamination, can result in:
• Loss of viscosity
• Gassing
• Discoloration
• Bad odors
• Fungal growth on product surface
• Product splitting
• Loss of adhesion
• Production clean down and production down time
• Loss of profit


Applications;
Nipacide FC is recommended for preservation of a wide range of applications including water based adhesives, polymer emulsions; water based decorative paints, metal working fluids and construction chemicals. 
When products are prone to surface contamination by fungi and head space protection is required, Nipacide FC should be one of the biocides of choice. 
Nipacide FC is effective against a wide range of spoilage organisms.

Use level;
Nipacide FC should be evaluated in finished products at levels between 0.10% and 0.30%. Please note that Nipacide FC is a formaldehyde donor biocide and levels of free formaldehyde in individual products will vary depending on various parameters. It is recommended that if you have concerns about the level of free formaldehyde, this should be checked in the finished product. Nipacide FC is particularly effective at preventing surface fungal contamination, in-can, by the slow release of formaldehyde.

Microbiological data;
Nipacide FC has a broad spectrum of activity which is demonstrated by the following MIC data.

MIC Levels Organism MIC (ppm)

Bacteria
Pseudomonas aeruginosa 100
Pseudomonas putida 100
Proteus vulgaris 75
Escherichia coli 75
Staphylococcus aureus 75

Fungi
Aspergillus niger 300
Penicillium mineoluteum 900
Fusarium solani 1000
Geotrichum candidum 1000

Yeast
Candida albicans 1500

(ethylenedioxy)dimethanol

(ethylenedioxy)dimethanol

(ethylenedioxy)dimethanol (Reaction products of ethylene glycol with paraformaldehyde (EGForm))

Translated names
(Ethyleendioxy)dimethanol (reactieproducten van ethyleenglycol en paraformaldehyde (met EGForm)) (nl)

(Ethylendioxy)dimethanol (Reaktionsprodukte aus Ethylenglycol und Paraformaldehyd (EGForm)) (de)

(ethylendioxy)dimethanol (reaktionsprodukter af ethylenglycol og paraformaldehyd (EGForm)) (da)

(ethylendioxy)dimethanol (reakční produkty ethylenglykolu a paraformaldehydu (EGForm)) (cs)

(ethylenedioxy)dimethanol (Reaction products of ethylene glycol with paraformaldehyde (EGForm)) (mt)

(ethylenedioxy)dimethanol (Reaction products of ethylene glycol with paraformaldehyde (EGForm)) (no)

(etilendioksi)dimetanol (produkti reakcije etilen glikola s paraformaldehidom (EGForm)) (hr)

(etilendioksi)dimetanol (reakcijski produkti etilen glikola s paraformaldehidom (EGForm)) (sl)

(Etilendioksi)dimetanolis (etilenglikolio ir paraformaldehido reakcijos produktas (EGForm)) (lt)

(Etilendiossi)dimetanolo (prodotti di reazione di glicole etilenico con paraformaldeide (EGFform)) (it)

(Etilendioxi)dimetanol (productos de reacción de etilenglicol con paraformaldehído (EGForm)) (es)

(Etilendioxi)dimetanol [Produse de reacție ale etilenglicolului cu paraformaldehidă (EGForm)] (ro)

(Etilenodioxi)dimetanol (produtos de reação de etilenoglicol com paraformaldeído (EGForm) (pt)

(Etiléndioxi)dimetanol (etilén-glikol és formaldehid reakciótermékei (EGForm)) (hu)

(Etilēndioksi)dimetanols (etilēnglikola reakcijas produkti ar paraformaldehīdu (EGForm)) (lv)

(Etyleenidioksi)dimetanoli (etyleeniglykolin ja paraformaldehydin (EGForm) reaktiotuotteet) (fi)

(Etylendioxi)dimetanol (reaktionsprodukter av etylenglykol med paraformaldehyd [EGForm]) (sv)

(Etylenodioksy)dimetanol (produkty reakcji glikolu etylenowego z paraformaldehydem (EGForm)) (pl)

(Etüleendioksü)dimetanool (etüleenglükooli ja paraformaldehüüdi reaktsiooni saadused (EGForm)) (et)

(Éthylènedioxy)diméthanol [produits de la réaction entre l'éthylène glycol et le paraformaldéhyde (EGForm)] (fr)

(Αιθυλενοδιοξυ)διμεθανόλη [προϊόντα αντίδρασης της αιθυλενογλυκόλης με την παραφορμαλδεΰδη (EGForm)] (el)

(Етилендиокси)диметанол (продукти от реакцията на етиленгликол с параформалдехид (EGForm) (bg)

etylénbis(oxy)dimetanol [produkt reakcie etylénglykolu a paraformaldehydu (EGForm)] (sk)

CAS names
Methanol, 1,1'-[1,2-ethanediylbis(oxy)]bis-

IUPAC names
(Ethylenedioxy)dimethanol
(ethylenedioxy)dimethanol
1,2-Bis(hydroxymethoxy)ethane
1,6-Dihydroxy-2,5-dioxahexane
2-(hydroxymethoxy)ethoxymethanol
2-(hydroxymethoxy)ethoxymethanol.
[2-(hydroxymethoxy)ethoxy]methanol
[ethane-1,2-diylbis(oxy)]dimethanol
EDDM
Ethylene glycol bis(semiformal)
ethylenedioxy)dimethanol
reaction product ethylene glycol with para-formaldehyde

Other identifiers
195326-00-2
Other
Deleted CAS number
3586-55-8

CAS no.: 3586-55-8;Ethylene glycol bis(semiformal) 
Nipacide FC ( EDDM ) is water based low toxicity formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. 
Nipacide FC ( EDDM ) is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. 
Microorganisms grow at a rapid rate and without use of the correct biocide, numbers can increase dramatically.

In-Can degradation in paints, polymer and adhesives as a result of bacterial and fungal contamination, can result in:
• Loss of viscosity
• Gassing
• Discoloration
• Bad odors
• Fungal growth on product surface
• Product splitting
• Loss of adhesion
• Production clean down and production down time
• Loss of profit


Applications;

Nipacide FC/ (ethylenedioxy) dimethanol is recommended for preservation of a wide range of applications including water based adhesives, polymer emulsions; water based decorative paints,
metal working fluids and construction chemicals. 
When products are prone to surface contamination by fungi and head space protection is required, Nipacide FC should be one of the biocides of choice.  

Nipacide FC is effective against a wide range of spoilage organisms.

Use level;
Nipacide FC / (ethylenedioxy) dimethanol should be evaluated in finished products at levels between 0.10% and 0.30%. 
Please note that Nipacide FC is a formaldehyde donor biocide and levels of free formaldehyde in 
individual products will vary depending on various parameters. 
It is recommended that if you have concerns about the level of free formaldehyde, this should be checked in the finished product. 

Nipacide FC is particularly effective at preventing surface fungal contamination, in-can, by the slow release of formaldehyde.
(Ethylenedioxy)Dimethanol

IUPAC Name    2-(hydroxymethoxy)ethoxymethanol

Synonyms    (ethylenedioxy)dimethanol;1,6-Dihydroxy-2,5-dioxyhexane;Methanol, 1,2-ethanediylbis(oxy)bis-;1,2-ETHANDIYLBIS(OXY)BISMETHANOL;[1,2-ethanediylbis(oxy)]bis-Methanol;
ethylene glycol dimethanol ether;2-(hydroxymethoxy)ethoxymethanol;2-methyloloxyethoxyme
(ethylenedioxy)dimethanol
EDDM
EC / List no.: 222-720-6
CAS no.: 3586-55-8
Mol. formula: C4H10O4
1,6-dihydroxy-2,5-dioxahexane
Nipacide FC

Nipacide FC
1. Purity is more than 90%,less odor。
2. One kind of broad-spectrum bactericide with low toxicity & high efficient,suitable for water-based metalworking fluid, paint, adhesives and other products.
3. Quick effect, good stability, higher oil soluble, non skin sensitization, can effectively limit the bacteria,and fungi to some extent,Prevent bacterial resistance.

(ethylenedioxy) dimethanol
(Ethyleendioxy)dimethanol (reactieproducten van ethyleenglycol en paraformaldehyde (met EGForm)) (nl)

(Ethylendioxy)dimethanol (Reaktionsprodukte aus Ethylenglycol und Paraformaldehyd (EGForm)) (de)
(ethylendioxy)dimethanol (reaktionsprodukter af ethylenglycol og paraformaldehyd (EGForm)) (da)
(ethylendioxy)dimethanol (reakční produkty ethylenglykolu a paraformaldehydu (EGForm)) (cs)
(ethylenedioxy)dimethanol (Reaction products of ethylene glycol with paraformaldehyde (EGForm)) (mt)
(etilendioksi)dimetanol (produkti reakcije etilen glikola s paraformaldehidom (EGForm)) (hr)
(etilendioksi)dimetanol (reakcijski produkti etilen glikola s paraformaldehidom (EGForm)) (sl)
(Etilendioksi)dimetanolis (etilenglikolio ir paraformaldehido reakcijos produktas (EGForm)) (lt)
(Etilendiossi)dimetanolo (prodotti di reazione di glicole etilenico con paraformaldeide (EGFform)) (it)
(Etilendioxi)dimetanol (productos de reacción de etilenglicol con paraformaldehído (EGForm)) (es)
(Etilendioxi)dimetanol [Produse de reacție ale etilenglicolului cu paraformaldehidă (EGForm)] (ro)
(Etilenodioxi)dimetanol (produtos de reação de etilenoglicol com paraformaldeído (EGForm) (pt)
(Etiléndioxi)dimetanol (etilén-glikol és formaldehid reakciótermékei (EGForm)) (hu)
(Etilēndioksi)dimetanols (etilēnglikola reakcijas produkti ar paraformaldehīdu (EGForm)) (lv)
(Etyleenidioksi)dimetanoli (etyleeniglykolin ja paraformaldehydin (EGForm) reaktiotuotteet) (fi)
(Etylendioxi)dimetanol (reaktionsprodukter av etylenglykol med paraformaldehyd [EGForm]) (sv)
(Etylenodioksy)dimetanol (produkty reakcji glikolu etylenowego z paraformaldehydem (EGForm)) (pl)
(Etüleendioksü)dimetanool (etüleenglükooli ja paraformaldehüüdi reaktsiooni saadused (EGForm)) (et)
(Éthylènedioxy)diméthanol [produits de la réaction entre l'éthylène glycol et le paraformaldéhyde (EGForm)] (fr)
(Αιθυλενοδιοξυ)διμεθανόλη [προϊόντα αντίδρασης της αιθυλενογλυκόλης με την παραφορμαλδεΰδη (EGForm)] (el)
(Етилендиокси)диметанол (продукти от реакцията на етиленгликол с параформалдехид (EGForm) (bg)
etylénbis(oxy)dimetanol [produkt reakcie etylénglykolu a paraformaldehydu (EGForm)] (sk)
Biocidal active substances
Methanol, 1,1'-[1,2-ethanediylbis(oxy)]bis-
IUPAC names
1,2-Bis(hydroxymethoxy)ethane
1,6-Dihydroxy-2,5-dioxahexane
2-(hydroxymethoxy)ethoxymethanol
2-(hydroxymethoxy)ethoxymethanol.
[2-(hydroxymethoxy)ethoxy]methanol
[ethane-1,2-diylbis(oxy)]dimethanol
Ethylene glycol bis(semiformal)
EDDM
Ethylene glycol bis(semiformal)
ethylenedioxy)dimethanol
reaction product ethylene glycol with para-formaldehyde
(Ethylenedioxy)dimethanol
Dimethylol glycol
3586-55-8
1,2-Bis[hydroxymethoxy]ethane
Ethylene glycol bis(semiformal)
1,2-Bis(hydroxymethoxy)ethane
1,6-dihydroxy-2,5-dioxahexane
1,6-dihydroxy-2,5-dioxyhexane
dimethanol
EINECS 222-720-6

(1,2-Ethanediylbis(oxy))bismethanol
Methanol, (1,2-ethanediylbis(oxy))bis-
DIMETHYLOL GLYCOL;1,2-Bis[hydroxymethoxy]ethane

Dascocide 9;Glycerol Impurity 5;(ethylenedioxy)dimethanol;2-methyloloxyethoxymethanol;1,6-Dihydroxy-2,5-dioxyhexane;1,6-Dihydroxy-2,5-dioxahexane;Ethylene glycol bis(seMiforMal);
1,2-ETHANDIYLBIS(OXY)BISMETHANOL;2-(hydroxymethoxy)ethoxymethanol;ethylene glycol dimethanol ether; (ethylenedioxy)dimethanol;1,6-Dihydroxy-2,5-dioxyhexane;Methanol,
 1,2-ethanediylbis(oxy)bis-;1,2-ETHANDIYLBIS(OXY)BISMETHANOL;[1,2-ethanediylbis(oxy)]bis-Methanol;ethylene glycol dimethanol ether;2-(hydroxymethoxy)ethoxymethanol;
2-methyloloxyethoxymethanol; Specification:    

Appearance:    colourless to yellowish liquid
Formaldehyde content (%):    42 - 48
pH value at 20°C (1% in dest. water):    7.0 - 8.0
Specific gravity at 25°C (g/ml):    1.180 - 1.200
Refractive index at 20°C:    1.430 - 1.443
 
Applications:    Liquid in-can preservative

For the preservation of pigment slurries, filler suspensions, polymer dispersions, solutions and dispersions of glues and thickeners, concrete additives, detergents, oil emulsions,polishes and other chemical-technical water-based preparations. 
Nipacide FC can be used to combat bacteria, mould and yeast. 
Nipacide FC is miscible with water in any ratio.

(ethylenedioxy)dimethanol; 1,6-Dihydroxy-2,5-dioxyhexane; Methanol, 1,2-ethanediylbis(oxy)bis-; 1,2-ETHANDIYLBIS(OXY)BISMETHANOL; [1,2-ethanediylbis(oxy)]bis-Methanol; 
ethylene glycol dimethanol ether; 2-(hydroxymethoxy)ethoxymethanol; 2-methyloloxyethoxymethanol; (1,2-    ethanediylbis(oxy))bismethanol
(ethylene dioxy) dimethanol
ethylene glycol bis(semiformal)
(ethylenedioxy)dimethanol
1,2-bis(hydroxymethoxy)ethane
2-(hydroxymethoxy)ethoxymethanol
methanol, (1,2-ethanediylbis(oxy))bis-
Liquid in-can preservative, pure (ethylendioxy) dimethanol

Uses : For the preservation of pigment slurries, filler suspensions, polymer dispersions, solutions and dispersions of glues and thickeners, concrete additives, detergents, oil emulsions, polishes and other chemical-technical water-based preparations.
The product can be used to combact bacteria - against mould and yeast best in combination with suitable other biocides. 
Miscible with water in any ratio.

OTHER PRODUCTS OF ATAMAN KIMYA : 
(ppm)
Bactericides    Troyshield B2    Hexahydrotriazine (HHT)    1000 - 3000
Troyshield MBM    Methylene bismorpholine (MBM)    1000 - 3000
Bakzid    Methylene-bisoxazolidine (MBO)    700 - 2000
Troyshield B7    (Ethylenedioxy)dimethanol (EDDM)    700 - 2000
Bodoxin AH    EDDM    700 - 2000
Bacillat    Tetramethylolacetylenediurea (TMAD)    1000 - 2500
Ebotec BT10    Benzisothiazolinone (BIT)    800 - 1600
Ebotec BT80    "Boosted" BIT    800 - 1600
Mergal K20    BIT    400 - 800
Troyshield B20    “Boosted” Benzisothiazolinone (BIT)    500 - 3000
Mergal 786    BIT + Methylisothiazolinone (MIT) + Chloro-methyl-
isothiazolinone/Methylisothiazolinone (CMIT/MIT)    400 - 800
Mergal 758    BIT; CMIT/MIT    1000 - 2000
Mergal MC14    CMIT/MIT    100 - 200
Mergal K9N    CMIT/MIT    1000 - 2000
Bodoxin    Stabilized CMIT/MIT    500 - 1500
Mergal K14PLUS    Stabilized CMIT/MIT    1000 - 2000
Troyshield B60    Polymeric cationic compound    100 - 1000
Fungicides    Troyshield FX40    Iodo-propynyl-butylcarbamate (IPBC)    150 - 400
Troyshield PA10    IPBC    500 - 1000
Troyshield FSP40    Sodium pyrithione (NaPT)    150 - 400
Cinon OI    IPBC + Octyl-isothiazolinone(OIT)    500 - 1000
Bactericides &
Fungicides    Mergal KM90    "Boosted" BIT for formaldehyde-free fluids, and against biofilm
and headspace fungi    700 - 1000
Mergal V698K4    EDDM + OIT    1000 - 2000
Bakzid 10N    MBO + NaPT    500 - 1500
Bakzid 2    HHT + NaPT    500 - 1500

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.