Peramin SMF 10 is well adapted to conventional cement, binder based on calcium sulfate or calcium aluminates, puzzolans or other fillers.
Peramin SMF 10 gives an homogeneous and nonsegregating mortar and grout.
Peramin SMF 10 renders the possibility to reduce water content thus increasing strength.
CAS Number: 64787-97-9
EC number: 613-691-4
Compatibility of Peramin SMF 10:
Peramin SMF 10 is compatible with all Peramin range as well as with most existing redispersible powder systems, accelerators and retarders.
Lab trials are advised before any industrial use.
Peramin SMF are sulfonated melamine polymer.
Peramin SMF 10 is the reference range of conventional plasticizers for drymix mortars, gypsum and concrete materials, due to their consistency, robustness and excellent cost-performance ratio.
Peramin SMF 10 is a dispersing agent.
Dosage of Peramin SMF 10:
Depending on the application, the dosage of Peramin SMF 10 varies from 0.2% to 2% weight/weight to binder.
Generally, Peramin SMF 10 will not effect the setting.
Peramin SMF 10 may cause a slight retardation at higher dosage or at low temperatures.
Conditions of storage of Peramin SMF 10:
Shelf life : 24 months in unopened bags.
Peramin SMF 10 may absorb moisture and should be stored in a dry area.
Opened Peramin SMF 10 bags should be carefully resealed and used up within a relatively short period of time.
When Peramin SMF 10 stored dry, it will retain its properties for at least 24 months.
Applications of Peramin SMF 10:
Concrete
Dry-mortar industry
PROPERTIES AND APPLICATIONS of Peramin SMF 10:
Peramin SMF 10 dispersing agent is a powdered product based on sulfonated melamine that adapts well to conventional cement, binder based on calcium sulfate or calcium aluminates, pozzolans or other fillers.
Peramin SMF 10 provides a homogeneous and non-segregating mortar.
Peramin SMF 10 offers the possibility of reducing the water content, thus increasing resistance, it is compatible with all additives on the market and especially with the Peramin line , but laboratory tests are advised before any industrial use, it is recommended for powder formulations.
Typically, Peramin SMF 10 dosage ranges from 0.2 to 2.0% by weight of binder.
Peramin SMF 10 application fields are: dry mortar and concrete industry.
Before use, Peramin SMF 10 is recommended to read the material safety data sheet.
Specifications of Peramin SMF 10:
Appearance: Off-white Powder / PERPA001
pH (5% solution): 8,5 + 1 / ISO976
Alkali as Na2O eq. (% by mass): < 13 / EN480-12
Dry Content (% by mass): 93,5 + 1 / EN480-8
Chloride content (% by mass): < 0,05 / EN 480-10
Peramin SMF 10 is well adapted to conventional cement, binder based on calcium sulfate or calcium aluminates, puzzolans or other fillers.
KEYWORDS:
64787-97-9, 613-691-4, P00SMF10, Peramin SMF 10, Peramin SMF 11, Peramin SMF 20, Peramin SMF 22, Peramin SMF 30, Peramin SMF 31, Peramin F40
The specifications of Peramin SMF 10 conform to the requirements defined in the norm EN 934-2 : concrete admixtures - definitions, requirements, conformity, marking and labelling.
As a superplasticizer, Peramin SMF 10 enables users to achieve high flow properties and reduce water content in self leveling compounds and screed technology.
Superplasticizers are high-range water reducing additives used when the dispersion of particles in suspension is required to modify mortars and concrete.
Peramin SMF 10 allow for a large reduction of the water content without affecting their workability, shorter setting time, lower shrinkage and higher mechanical strengths.
Peramin SMF 10 can also enable greater flowability with the same water content, meaning a decrease in viscosity, which results in excellent flow properties, as well as very good self-leveling properties.
Typically, the dosage normally lies in the range of 0.1%-0.8% of the dry mortar total weight, depending on the kind of superplasticizer and performance required.
During Peramin SMF 10's initial stage of use, Peramin SMF provides a long working time, flowability and water reduction.
During setting, Peramin SMF 10 provides consistency, robustness and regularity of color.
And, once installed, Peramin SMF 10 guarantees high mechanical strength.
Peramin SMF 10 is a plasticizer - water reducer and also have these properties:
- Delivers high strength
- Delivers homogeneity
- Delivers flowability
There are seven main products in the Peramin SMF range.
Peramin 10 through 31 are powdered sulfonated melamine superplasticizer, while F40 comes in liquid form.
Peramin SMF 10 is the reference grade for all applications.
Peramin SMF 11 enhances flow and is especially recommended for dry-silo mortars.
Peramin SMF 20 has a low release of free formaldehyde.
Peramin SMF 22 also has a low release of free formaldehyde and comes especially recommended for use with calcium sulfate binders.
Peramin SMF 30 enhances flow under weak mixing and provides a good wetting effect, especially recommended for fluid tile adhesives.
Peramin SMF 31 increases open time through its controlled retarding effect.
Peramin F40 is the liquid reference within the Peramin SMF superplasticizer range.
Product name : PERAMIN SMF 10
Product code : P00SMF10
Key benefits of Peramin SMF 10:
Long working time
Flowability
Water reduction
Consistency during setting
Robustness
Regularity of color
High mechanical strength
Properties of all Peramin products:
Peramin SMF 10 Peramin SMF 11 Peramin SMF 20 Peramin SMF 22 Peramin SMF 30 Peramin SMF 31 Peramin F40
Appearance: Off-white powder Off-white powder Off-white powder Off-white powder Off-white powder Off-white powder Liquid
Dry content %: 92.5 - 94.5 92.5 - 94.5 92.5 - 94.5 92.5 - 94.5 92.5 - 94.5 92.5 - 94.5 39 -41
pH: 7.5 -9.5 8 - 10 8.5 -10.5 8.5 -10.5 9.5 -11.5 8.5 -10.5 9.5 -11.5
Alkali as Na₂O eq.%: < 13 < 13 < 13 < 13 < 13 < 13 < 5
Chloride content %: < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05