POLYOX WSR 205

CAS number: 25322-68-3

POLYOX WSR 205 is a non-ionic poly(ethylene oxide) polymer typically used as a thickener, emollient, and film former in adhesive, personal care, and packaging applications.
POLYOX WSR 205 NF is a low molecular weight, water soluble, pharmaceutical grade poly(ethylene oxide) polymer. 
POLYOX WSR 205 is often used as a binder and thickener.
POLYOX WSR 205 is a non-ionic, water-soluble poly(ethylene oxide) polymer with a molecular weight of 600,000. 
POLYOX WSR 205 can be used a film former, a thickener, or an emollient. 
POLYOX WSR 205 can be cast into a water-soluble film. 
POLYOX WSR 205 can then be used to make packaging that is completely water-soluble and useful for packing pre-measured doses of hazardous chemicals like pesticides. 
When incorporated into creams, lotions, soaps, and shampoos POLYOX WSR 205 provides a soft feel and smooth application while also increasing aqueous thickening. 
Additionally, solutions of POLYOX WSR 205 have outstanding wet tack but will dry to leave a non-tacky residue. 
This makes POLYOX WSR 205 an ideal resin for tail-tie adhesives for toilet paper and paper towels.

Applications of POLYOX WSR 205:
Ceramics; Water Based Coatings; Tablets; Water Based Inks; Water Based Adhesives & Sealants

Product Specifications
Viscosity: 6800 - 8800 cP
pH at 25degC: 8.0 - 10.0
Loss on drying: 0.0 - 1.0 WT%
Silicon dioxide: 0.8 - 3.0 WT%
Primary Chemistry: Poly(ethylene oxide)

Features & Benefits of POLYOX WSR 205:
-Water-soluble
-High binding efficiency
-Crosslinkable
-Viscoelastic
-Thermoplastic
-Low toxicity
-Nonionic
-Wet tack
-Emollient

General advice: If potential for exposure exists refer to Section 8 for specific personal protective equipment.
Inhalation: No emergency medical treatment necessary.
Skin contact: Wash off with plenty of water.
Eye contact: Flush eyes thoroughly with water for several minutes. 
Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. 
If effects occur, consult a physician, preferably an ophthalmologist.
Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.

Polyox™ WSR-205 by Dow Chemical acts as a foam booster and slip agent. 
POLYOX WSR 205 is a water-soluble product designed to reduce drag, imparts smooth, lubricious after-feel and leaves hair & skin silky. 
POLYOX WSR 205 improves tactile properties of water phase and overall aesthetics. 
POLYOX WSR 205 is compatible with a wide range of surfactants. 
Polyox™ WSR-205 finds application in formulating shaving products, body washes, liquid hand soaps, bar soaps and styling gels.

Product Specifications
Viscosity, 5% Aqueous Solution: 4500-8800 cP
pH @ 25°C, 5% Aqueous Solution: 8.0-10.0
Particle Size, Thru 10 Mesh: 100%
Particle Size, Thru 20 Mesh: 96-100%
Particle Size, Thru 100 Mesh: 35-75%
Particle Size, Thru 200 Mesh: 0-40%
Loss on Drying: 0.0-1.0 Wt%
Alk. Earth Metals: 0.0-1.0 Wt%
Silicon Dioxide: 0.8-3.0 Wt%
Residue on Ignition: 0.0-2.0 Wt%
Free Ethylene Oxide: 0-10 ppm
BHT: 100-1000 ppm
NF Ident. Tests A&B: Pass current USP/EP/JP
Primary Chemistry: Poly(ethylene oxide)

POLYOX WSR 205 HANDLING AND STORAGE
Precautions for safe handling: Avoid contact with eyes. Wash thoroughly after handling. 
No smoking, open flames or sources of ignition in handling and storage area. 
Good housekeeping and controlling of dusts are necessary for safe handling of product. 
Electrically bond and ground all containers, personnel and equipment before transfer or use of material. 
Keep away from heat, sparks and flame. 

Description of POLYOX WSR 205:
Provides lubricity, soft and silky sensory and forms a matrix to retain water in the skin and hair, in addition to improving foam. 
POLYOX WSR 205 has low viscosity.

CAS Number: 112945-52-5,25322-68-3
Grade: Technical
Appearance: solid
Auto Ignition Temperature: > 280 °C (536 °F)
Color: white, off-white
Flash Point: Not applicable
Odor: ammoniacal
pH: 8 - 10 (as aqueous solution)
Recommended Use: Industrial chemical
Relative Density: 1.15 - 1.26 Reference Material: (water = 1)
Solubility in Water: completely soluble
Thermal Decomposition: > 300 °C (572 °F)

Name: Poly(ethylene glycol)

CAS: 25322-68-3

POLYOX™ WSR has been used for over 50 years for its unique properties. 
Unlike other polymers, POLYOX™ WSR combines water and solvent solubility. 
While thermo-elastic, POLYOX™ WSR polymers can also exhibit a thermoplastic behavior. 
This versatility has made POLYOX™ WSR a popular choice for many industrial applications.

Synonyms:
PEO
PEG
PEG-7
PEG-8
PEG-4
hm500
peo18
PEG50
PEG546
PEG942
PEG810
PEG634
PEG555
PEG170
400500
peg-32
M 9000
HM 500
dd3002
E 1000
poly-g
Polyox
ucar4c
PEG-20
PEG-75
PEG-14

POLYOX Water Soluble Resins are a range of low to high molecular weight non-ionic poly (ethylene oxide) polymers that add richness and improved feel to shampoo formulations. 
They improve the density and appearance of the foam without affecting its height and detergent properties of the composition. 
These polymers also provide excellent glide and reduce foam distribution resistance. 
Also polymers POLYOX are recommended in the formulation of shampoos and hair conditioners in order to improve the combability of wet hair due to their "lubrication", in styling products, bath foams, shower gels. 
Polyox WSR-205 is a water-soluble additive designed to increase the density and fullness of lather in shampoos, body washes and liquid soaps.

WHAT ARE POLYOX™ WATER-SOLUBLE RESINS (WSR)?
POLYOX™ Water-Soluble Resins (WSR) are thermoplastic, non-ionic polymers with high molecular weight. 
They are obtained through the heterogeneous polymerization of ethylene oxide (CH2CH2O)n, which in turn creates poly(ethylene oxide) or PEO.
POLYOX™ WSR can be supplied in a wide range of molecular weights to meet specific formulation and processing requirements

PEG-16
PEG-18
PEG-33
PEG-45
PEG-55
PEG-80
PEG-90
PEG-2M
PEG-5M
PEG-7M
PEG-9M
PEG-12
PEG900

Definition
Any of several condensa-tion polymers of ethylene glycol with thegeneral formula HOCH2(CH2OCH2)nCH2OH orH(OCH2CH2)nOH. 
Average molecular weightsrange from 200 to 6000. 
Properties vary with molec-ular weight.

Appearance
White waxy crystalline flakes
Melting point: 64-66 °C
Boiling point: >250°C
density: 1.27 g/mL at 25 °C
vapor density: >1 (vs air)
vapor pressure: <0.01 mm Hg ( 20 °C)
refractive index: n20/D 1.469
Fp: 270 °C
storage temp.: 2-8°C
solubility: H2O: 50 mg/mL, clear, colorless
form: waxy solid
color: White to very pale yellow
PH:5.5-7.0 (25℃, 50mg/mL in H2O)
Stability:Stable. 
Incompatible with strong oxidizing agents.
Water Solubility: Soluble in water.
Sensitive: Hygroscopic
Merck: 14,7568

Uses of POLYOX WSR 205:
polyethylene glycol (PEG) is a binder, solvent, plasticizing agent, and softener widely used for cosmetic cream bases and pharmaceutical ointments. 
Pegs are quite humectant up to a molecular weight of 500. 
Beyond this weight, their water uptake diminishes.
Polyethylene Glycol is a binder, coating agent, dispersing agent, flavoring adjuvant, and plasticizing agent that is a clear, colorless, viscous, hygroscopic liquid resembling paraffin (white, waxy, or flakes), with a ph of 4.0–7.5 in 1:20 concentration. 
POLYOX WSR 205 is soluble in water (mw 1,000) and many organic solvents.

PEG-150
PEG-14M
PEG-20M
PEG-23M
PEG-25M
PEG-45M
PEG-65M
PEG-90M
PEG-100
PEG-135
PEG-180
PEG-220
PEG-240
PEG-450
PEG-500
PEG-800
PEG 200
PEG 300
PEG 600

POLYOX™ WSR exhibits many properties that are
typical of other classes of water-soluble polymers:
• Lubricity
• Thickening and rheology modification
• Binding
• Film formation
• Water retention

POLYOX WSR 205 is also unique in that they are thermoplastic polymers that can be calendared, extruded, injection-molded or cast.

PEG 400
PEG-350
wsr-301
solbase
DD 3002
Modopeg
Nosilen
PEG1250
PEG9000
PEG1540
PEG3600
PEG3000
Carmowax
PEG12000
FLJ27114
Nycoline
merpoloj
Macrogol
ENT 1000

WSR-205 is a water soluble PEG-14M with a relatively low molecular weight. 
In a cream, lotion, gel or stick the product will go a long way toward.


POLYOX™ WSR 301 Fine Powder NF is a poly(ethylene oxide) polymer with USP approvals. 
POLYOX WSR 205 is used as film former, binder, thickener, and lubricant in ceramic, personal care, and adhesive applications.

POLYOX™ WSR can be used in a wide range of applications and has seen increasing adoption in industrial applications.
We often customize new POLYOX™ WSR grades or chemistries to meet specific customer requirements.

alcoxe30
Aquaffin
CARBOWAX
postonal
Polyox-1
polyg400
PEG 3350
PEG 6000
PEG 8000
PEG-115M
PEG-160M
PEG 1500
PEG 1450
PEG 1000
PEG8000P
PEG4000P
PEG 2,000
PEG 4,000
Poly-G600
Polyox 30
polyoxwsr
wsr-ncoag
teisanz75
Merpol OJ
peg6000ds
pluracole
Pluriol E
oxidewaxan
Laprol 402
Alcox E 30
bradsynpeg
Polyox-100
Polyox WSR
Polyox FRA
PEG 40'000
PEG 35,000
PEG 20,000
PEG NO 600
PEG NO 200
PEG NO 300
PEG NO 400
POLYGLYCOL
PEG 10,000
Anti-POLG1
Anti-POLGA

POLYOX polymers can be used as an alternative to HPMC in ER matrix tablets.
PEO formulations investigated in this study with metformin HCl produced tablets with low weight variation; high breaking force and low friability values at compression forces of 15 kN and 20 kN.
To produce a 12-hour release profile for the freely soluble drug metformin HCl, high viscosity grades of PEO should be used at approximately 30% w/w in the formulation. 
Similar drug release rates were obtained for WSR-301, WSR-303 and METHOCEL™ K100M CR ER tablets.
In order to guarantee a robust PEO matrix, at least 20% of polymer should be included in the formulation. 

POLYOX™ Water-Soluble resins are high molecular weight water soluble polymers. 
A long chain poly(ethylene oxide), POLYOX™ is available in a wide range of molecular weights making POLYOX WSR 205 an excellent choice for a formulator trying to tailor a specific end viscosity. 
As a result of its wide ranging compatibility, POLYOX WSR 205 is readily used in a variety of applications. 
POLYOX WSR 205 imparts lubricity, binding, water retention, thickening and film formulation.
POLYOX™ differentiates itself from other water soluble thickeners by the high wet tack POLYOX WSR 205 imparts, POLYOX WSR 205s ability to be used in thermoplastics, and the silky feel it can create in end products.

HO-PEG11-OH
400 PEG 400
Polyox N 10
Polyox N 80
CARBOWAX(R)
Carbowax 20
Alcox E 160
Bradsyn PEG
Lineartop P
gafanole200
emkapol4200
Emkapol 150
Emkapol 200
Oxide Wax A
pluriole200
polydiol200
Polydiol 200
Oxide Wax AN
Emkapol 4200
jorchem400ml
macrogol1000

Modopeg 4000
Carbowax 200
Carbowax 2OM
Carbowax 300
Carbowax 100
Carbowax 550
Carbowax 600
carbowax1500
carbowax1540
carbowax6000
CARBOWAX 20M
poly-gseries
polyoxwsr301
AQUACIDE III
COMPOUND 20M
CARBOWAX 400
Macergol 600
Macergol 400
PEG 200-8000
PEG NO 4,000
PEG NO 2,000
PEG NO 6,000
PEG NO 1,000
PEG NO 1,500
PEG NO 1,540
peg solution
Macergo 6000
PEG 4000 USP
Macrogol 300
Lutrol? E 400

Product details of PEG-14M 
-Shampoos and conditioners
-Liquid hand soaps and bar soaps
-Shaving products
-Hair styling products
-Slip/lubricious feel
-Smooth after-feel
-Foam density improvement
-Synergistic boost of hair conditioning and deposition performance when combined with UCARE™ and SoftCAT™ Polymers
-Improved spreadability

A water soluble additive designed to enhance the density and fullness of the foam in shampoos, body washes and liquid soaps. 
POLYOX WSR 205 does synergistically enhance conditioning of dry and wet hair and skin in formulations containing cationic conditioning polymers. 
INCI Name: PEG-14M

Uses of POLYOX WSR 205:
-Shampoos and conditioners
-Liquid hand soaps and bar soaps
-Shaving products
-Hair styling products
-Benefits:
-Slip/lubricious feel
-Smooth after-feel
-Foam density improvement
-Synergistic boost of hair conditioning and deposition performance when combined with UCARE™ and SoftCAT™ Polymers
-Improved spreadability

Lutrol? E 300
Macrogol 3350
POLYGLYCOL400
LUTROL(R)E400
POLYGLYCOL200
PEG NO 20,000
Macrogol 400.
Macergol 6000
CARBOWAX 4000
CARBOWAX 1000
CARBOWAX 1450
swasconold-60
polyoxwsr-301
polyoxwsr-n60
Polyox WSR 31
Polyox WSR 35
Polyox SR 301
CARBOWAX 3350
MACROGOL 4000
MACROGOL 6000
Carbowax 6000
Carbowax 1500
Carbowax 1540
Carbowax 5000
Gafanol E 200
Gafanol E 300
carbowax10000
Pluriol E 800
Pluriol E 200
Pluriol E 300

AN increase in the concentration of K2CO3 in Polyox WSR 205 causes a decrease in the drag reduction1; this has been successfully correlated with lowered values of the intrinsic viscosity. 
Nonionic, water-soluble polypeptides can interact with sodium dodecyl sulphate (SDS) to form complexes, and above a certain concentration the reduced viscosity of some of these polymers is increased. 
The immediate implication is that if such interactions also take place with polyethylene oxides of high molecular weight then changes in the observed drag reduction may occur.

POLYOX™ WSR are non-ionic, ultrahigh molecular weight poly (ethylene oxide) polymers. 
This novelty item has many unique properties and available in various grades. 
The material comes in off-white powder form. 
Properties exhibit by these polymers are such as – thickening, lubricity, binding, water retention and film formation.

FEATURES
Ultra high molecular weight (Ranges from 100,000 – 8,000,000)
Thickening of formulations
Low toxicity
High degree of wet tack
Thermoplastic material – readily extruded, injection molded and cast
Lubricity, drag reduction and drift control
Available in standard and NF Grades

APPLICATIONS of POLYOX WSR 205

POLYOX Water-Soluble Resins have a unique array of properties that could add value to your existing formulations. 
Listed below are the advantages in each different sectors when POLYOX is introduced:
AGRICULTURE – Seed coatings, seed tape, water-soluble packaging, agricultural drift control
AQUEOUS DRAG REDUCTION AND DRIFT CONTROL – Fire-fighting additive, storm sewers
BUILDING AND CONTRUCTIONS – Paints & coatings, cements & concrete, asbestos cement extrusion aid, paint and varnish removers, concrete pumping
CERAMIC FORMING AID
ELECTRONICS AND TELECOMMUNICATIONS – Batteries, fibre optics, cable, wires, fluorescent lamp
HOUSEHOLD – Detergent liquids, floor cleaners
MINING – Reduced spontaneous combustion of coal
PAPER – Tail-tie paper adhesives, tissue and toweling adhesives, flocculation and paper fines retention
PERSONAL CARE AND COSMETICS – Hair care & skin care products, shaving products, oral care products
PHAMACEUTICALS – Modified release of active ingredients, mucosal bioadhesives

Pluriol E 400
pluracole-200
pluracole-300
pluracole-400
pluracole-600
pluracolp-710
pluracole-6000
pluracolp-1010
pluracolp-3010
pluracolp-4010
pluracole-4000
Pluriol E 4000
Pluriol E 9000
pluracole-1500
alkapolpeg-200
alkapolpeg-300
alkapolpeg-600
MACROGOLUM 300
MACROGOLUM 400
Polyglycol 600
polyglycol1000
polyglycol6000
Polyox WSR 205
Polyox WSR 301
Polyox WSR-FRA
PEG 4000 RESIN
Macrogol 2,000
Macrogol 3,000
Macrogol 1,500
Macrogol 35,000
Macrogol 20,000
PEG 8000 Powder
POLYGLYCOL 4000

Polyox WSR 1105
Polyox WSR N 80
Polyox WSR N-10
Polyox WSR N750
CARBOWAX(R) 400
Polyox WSR-N 60
polyglycole1000
polyglycole-300
Polyglycol 6000
polyglycolp-425
alkapolpeg-6000
alkapolpeg-8000
Carbowax E-9000
Chemiox E 20(C)
Oxirane polymer
poly(vinyloxide)
carsononpeg-4000
polyglycolp-1200
polyglycole-8000
polyglycole-4500
Polyox Coagulant
Polyglycol 12000
polyglycole-4000
MACROGOLUM 4'000
MACROGOLUM 6'000
MACROGOLUM 3'000
MACROGOLUM 1'500
CARBOWAX PEG 400
CARBOWAX PEG 600
POLYOXY ETHYLENE

PEG-6 AND PEG-32
KONION PEG-4000P
Juyi'erchun 6000
MACROGOL300-8000
Carbowax? PEG 401
CARBOWAX PEG-1450
Poly(ethylene oxi
CARBOWAX PEG 8000
CARBOWAX PEG 3350
MACROGOLUM 20'000
MACROGOLUM 35'000
polyglycole-400nf
Polyox WSR-N 3000
ethylenepolyoxide
Poly(vinyl oxide)
Polyethylene diol
Plastigen PR 8086
oxyethylenepolymer
Ethylene polyoxide
polyglycole-4500nf
polyglycole-8000nf
polyglycole-1450nf
POLETHYLENE GLYCOL
Polyethlene glycol
Polyethylenglycol11
POLYETHYLENE GLYCOL
polyglycole-4000usp

Polyhydroxyethylene
polyoxyethylene(75)
polyoxyethylene1500
polyoxyethylenediol
E 1000 (polyglycol)
Oxyethylene polymer
Oxirane homopolymer
PolyethyleneoxideMW
POLY(ETHYLENE OXIDE)
polyethyleneglycol#6
glycols,polyethylene
POLYETHYLENEOXIDE400
Kollisolv? PEG E 400
Kollisolv? PEG E 300
POLYETHYLENEGLYCOL150
Oxidated polyethylene
POLYETHYLENEGLYCOL14M
Macrogolum 400, PEG
Macrogolum 300, PEG
Glycols, polyethylene
ethyleneglycolpolymer
polyethyleneglycol#75
polyethyleneglycol#32
polyethyleneglycol20m
UNDECAETHYLENE GLYCOL
peg solution hybri-max
POLY(ETHYLENE GLYCOLS)

Polythylene glycol 600
PEG 1500 30% SOLUTION*
polyethyleneglycol#350
polyethyleneglycol#425
polyethyleneglycol#810
polyethyleneglycol#238
polyethyleneglycole600
polyethylenegylcol#282
ETHYLENE OXIDE POLYMER
MERCKOFIX(TM) FIXATIVE
Macrogolum 1000, PEG
POLYETHYLENEGLYCOL5000
poly(Ethyleneglycol)40
PFD-G3-PEG6k-Acetylene
Maleimide-PEG-NHS-5000
For Gas Chromatography
PFD-G1-PEG20k-Acetylene
Proethylene glycol(PEG)
Poly(ethylene oxide) NF
Macrogolum 1,500, PEG
Macrogolum 2,000, PEG
Macrogolum 6,000, PEG
Macrogolum 3,000, PEG
Macrogolum 4,000, PEG
Polyethylen glycole 300
Macrogol 1000 PEG-1000
POLYETHYLENE GLYCOL 200
POLYETHYLENE GLYCOL 300
POLYETHYLENE GLYCOL 330
POLYETHYLENE GLYCOL 400

Polyoxyethylene(peo-ls)
polyaethylenglykole#810
polyethyleneglycol#1200
polyethyleneglycol#1250
poly(oxyethylene)glycol
polyaethylenglykole#200
polyaethylenglykole#238
polyaethylenglykole#282
polyaethylenglykole#300
polyaethylenglykole#400
polyaethylenglykole#600
Ethylene glycol polymer
POLYETHYLENE GLYCOL 502
Peg(PolyethyleneGlycol)
POLYETHYLENE GLYCOL 420
POLYETHYLENE GLYCOL 600
Polyethylene glycol PEG
POLYETHYLENE GLYCOL 6000
POLYETHYLENE GLYCOL 4500
POLY(ETHYLENE GLYCOL)900
POLYETHYLENE GLYCOL 8000
PolyethyleneGlycol,Mw400
PolyethyleneGlycol,Mw540
PEG:searchpolyethylglyco
polyaethylenglykole#6000
polyaethylenglykole#1250
polyaethylenglykole#1500
polyaethylenglykole#1540
polyaethylenglykole#4000
polyaethylenglykole#1000
Poly(oxyethylene glycol)
POLYETHYLENE GLYCOL 4000
POLYETHYLENE GLYCOL 3350

POLYETHYLENE GLYCOL 3000
POLYETHYLENE GLYCOL 2000
MERCKOFIX SPRAY FIXATIVE
POLYETHYLENE GLYCOL 1000
POLYETHYLENE GLYCOL 1540
POLYETHYLENE GLYCOL 1550
POLYETHYLENE GLYCOL 1450
POLYETHYLENE GLYCOL 1500
PEG 400 5g [25322-68-3]
PEG 600 5g [25322-68-3]
Poly(ethylene oxide),PEO
Macrogolum 35,000, PEG
Macrogolum 20,000, PEG
polyethlene glycol oxide
Carbowax SENTRY PEG 4600
Poly(ethylene glycol) 660
Molecrlar weight:200~8000
POLYETHYLENEGLYCOL1000,NF
POLYETHYLENEGLYCOL,300,NF
POLYETHYLENEGLYCOL,400,NF
POLYETHYLENEGLYCOL,600,NF
PEG 1000 1g [25322-68-3]
Polyethylene glycole 6000
POLYETHYLENE GLYCOL 1'500

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.