CAS Number: 26062-79-3
Polyquaternium-6 (PQ-6) is the polymeric quaternary ammonium salt derived from the homopolymerization of diallyldimethylammonium chloride (DADMAC) monomer.
The grades of Polyquaternium-6 supplied to the personal care industry typically have weight-average molecular weight (Mw) values of ca. 150,000 g/mol, although grades with Mw values as low as 15,000 g/mol are available.
Polyquaternium-6 is a strong polyelectrolyte, i.e. it is comprised of repeating units that remain fully ionized in aqueous solutions independent of the solution pH value.
In addition, Polyquaternium-6 has a relatively high cationic charge density because each repeating unit bears a positive charge.
Polyquaternium 6 is a polymer of dimethyl diallyl ammonium chloride.
Polyquaternium-6 is classified as :
-Antistatic
-Film forming
Polyquaternium-6 gathers electrolyte for the strong cation.
Polyquaternium-6 is clear to light yellow viscose liquid with freezing point -2.8℃, specific weight1.04g/cm3, resolve temperature 280-300℃.
Polyquaternium-6 is easy to dissolve in water, but not easy to combust.
Polyquaternium-6 has strong coagulate dint and good water solution stability.
Polyquaternium-6 doesn't become gel and keep stable in the wide pH range.
Anti-chlorine and high charge density, these characteristics make it become ideal product of hair stem.
Polyquaternium-6 can also be applied in hair and skin care.
Polyquaternium 6 (P6) is a strong cationic polymer, easily soluble in water, and maintains good stability in a wide range of PH value.
Adding of Polyquaternium-6 to hair care products such as coloring agents, bleaching agents, bulking agents, styling agents, etc., can play a better conditioning; adding to moisturizing cream, hand soap, shower gel, shaving cream, deodorant and other skin care products.
Polyquaternium-6 can play a very good moisturizing performance and give the skin a superior lubricating feeling.
About liquid polyquaternium:
Polyquaternium-6 is more accurate to say that it is a water-soluble polyquaternary ammonium salt.
A series of novel water-soluble polyquaternary ammonium salts were prepared by copolymerization of epichlorohydrin, dichloroethyl ether and N N N' N'-tetramethylethylenediamine, methylamine, ethylamine and dodecylamine.
The reaction synthesis yield is high, the reproducibility is good, and the post-treatment of the product is simple, so that the industrial application prospect of the product is good.
Usage of Polyquaternium-6:
1. Polyquaternium-6 is a kind of homopolymer with high cationic activity.
Polyquaternium-6 can provide excellent conditioning effect for hair even in low concentration.
Polyquaternium-6 is used in shampoo, bleach, hair colorant and hair spray, the concentration generally is 0.5% ~ 1%.
2. Polyquaternium-6 can offer moist, glossy and rich foam.
Polyquaternium-6 can make the wet hair more smooth for combing and the antistatic ability and give hair a smooth, silly and lustrous touch.
3. Added into moisturizing cream, bath form, shaving cream and deodorant, Polyquaternium-6 contributes to excellent skin feel.
The suggested concentration of Polyquaternium-6 is 1% ~ 2%.
4. Polyquaternium-6 can improve dispersion, direct nature and activity of the functional elements which is used in hair and skin care.
Product Description:
Polyquaternium-6 (2687-91-4) is white or light yellow liquid.
Polyquaternium-6 is also known as Ethyl Pyrrolidinone, 1-Ethyl-2-Pyrrolidone and Ethyl Pyrrolidone.
Polyquaternium-6 Is a chemical compound.
Polyquaternium-6 is a polymeric quaternary ammonium salt of dimethyl diallyl ammonium chloride.
Polyquaternium-6 is designed for use in a large range of applications in the cosmetic industry.
Polyquaternium-6s high substantive cationic nature makes it especially useful as a conditioner in skin and hair care formulation.
Polyquaternium-6 (PQ-6) is the polymeric quaternary ammonium salt derived from the homopolymerization of diallyldimethylammonium chloride (DADMAC) monomer.
KEYWORDS:
26062-79-3, Polyquaternium-1, Polyquaternium-2, Polyquaternium-4, Polyquaternium-5, Polyquaternium-7, Polyquaternium-8, Polyquaternium-9, Polyquaternium-10, Polyquaternium-11
INCI Name: Polyquaternium-6
Registration: CAS No.: 26062-79-3
COSING REF No: 36881
Chem/IUPAC Name: Polyquaternium-6 is a polymeric quaternary ammonium salt of dimethyl diallyl ammonium chloride
Functions of Polyquaternium-6:
-Antistatic
-Film forming
-Skin conditioning
-Viscosity controlling
Applications of Polyquaternium-6:
Polyquaternium-6 can be used in hair-care and in skin-care products such as: conditioning shampoos, post-shampoo rinse and non-rinse conditioners and hair dyeing products.
Recommended use levels of Polyquaternium-6:
The concentration required is:
In shampoos: 0,2 – 0,5%
In conditioners: 0,5 - 2,0%
In skin care products: 0,2 - 0,5%
In bar soap: 0,1 - 0,5 %
In perms: 0,1 - 1,5 %
Storage of Polyquaternium-6:
Protected from light and humidity in a clean place at room temperature.
Once open, handle with care to avoid secondary microbial contamination.
Specifications of Polyquaternium-6:
Appearance: colorless to light yellow clear viscous liquid
pH: 5–8 (1% water solution,25℃)
Viscosity @ 25°C 5000–25000cps
Water: 59.0 - 61.0 %
Polyquaternium-6 is basically polymeric quaternary ammonium salt of dimethyl diallyl ammonium chloride.
This cationic homopolymer is equipped for use in an extensive range of applications in the cosmetic industry over the globe.
Since polyquaternium is positively charged the neutralizes negative charge of the shampoo helping the hair to stay flat.
Polyquaternium-6's high Antistatic, Film forming, Skin conditioning, Viscosity controlling nature makes it useful as a conditioner in skin and hair care formulation.
In hair care products polyquaternium-6 provides benefits like it Provides a luster and a soft silky feel, it gives a soft, velvety and non-greasy after feel to the skin.
Polyquaternium-6 improves the spreadability of the final product.
In Hair Care products Polyquaternium-6 helps to Reduce Static and flyaway effect, improve wet and dry capability and it provides luster and a soft silky feel to hair, according to a recent study of Fact.
MR consumers prefer polyquaternium-6 based products only for damaged and tight curly hair and not for regular use.
Polyquaternium-6 is easy to use for making cosmetic products due to its easy solubility in water.
Polyquaternium-6, 35 Percent Aqueous Solution, Very low molecular weight is used as a cosmetic antistatic and conditioning agent.
Ungraded products indicative of a grade suitable for general industrial use or research purposes and typically are not suitable for human consumption or therapeutic use.
Synonyms: N,N-Diallyl-N,N-dimethylammonium Chloride Homopolymer ; N,N-Dimethyl-N-(2-propenyl)-2-propen-1-aminium Chloride Polymer ; Poly(diallyldimethylammonium Chloride) ; Poly(DMDAAC)
Polyquaternium-6 in hair care Products :
Relaxers, Bleaches, Dyes, Shampoos, Conditioners, Styling Products, and Permanent Waves.
1.Contributes luster and a soft, silky feel;
2.Provides excellent slip, lubricity and snag-free wet compatibility;
3.Imparts excellent dry compatibility;
4.Suggested starting concentration:1.0%(shampoo and conditioner),3.0%(others)
Polyquaternium-6 in skin care Products :
Moisturizing Creams, Lotions, Bath Gels, Liquid Soaps, Soap Bars, Shaving Products, Antiperspirants andDeodorants.
1.Imparts a smooth, velvety feel; reduces tightness after drying skin;
2.Provides excellent moisturization;
3.Contributes lubricity which can help make skin care products easier to apply;
4.Liquid cleansing products acquire richer foam with improved stability;
5.Suggested starting concentration:1.0%
Uses of Polyquaternium-6:
The unique decolorization ability is mainly applied to the decolorization treatment of high chroma wastewater from dye factory, and the applicable dyes are active type, acid type and disperse dye, etc.
Polyquaternium-6 can also be used for textile, printing and dyeing, ink and other industrial wastewater treatment.
Polyquaternium-6 can also be used as paper reinforcement, sizing agent, etc.
Cosmetic uses of Polyquaternium-6:
The safety of the cosmetic ingredient addressed in this safety assessment is evaluated based, in part, on data received from the United States (US) Food and Drug Administration (FDA) and the cosmetics industry on the expected use of this ingredient in cosmetics.
Use frequencies of individual ingredients in cosmetics are collected from manufacturers and reported by cosmetic product category in FDA’s Voluntary Cosmetic Registration Program (VCRP) database.
Use concentration data are submitted by the cosmetics industry in response to surveys, conducted by the Personal Care Products Council (Council), of maximum reported use concentrations by product category.
According to 2020 VCRP data, Polyquaternium-6 is reported to be used in 282 cosmetic products.
The results of a concentration of use survey completed in 2019 - 2020, and provided by the Council in 2020, indicate that Polyquaternium-6 is being used at maximum use concentrations up to 1.2% in leave-on products (tonics, dressings, and other hair grooming aids) and at maximum use concentrations up to 3% in rinse-off products (hair straighteners).
Cosmetic products containing Polyquaternium-6 may be applied to the skin/hair (at concentrations up to 3%) or, and may come in contact with mucous membranes (at concentrations up to 0.25% in bath soaps and detergents).
Products containing Polyquaternium-6 are not typically applied more than once per day, and may come in contact with the skin for variable periods following application.
Daily or occasional use may extend over many years.
Polyquaternium-6 is reported to be used in aerosol hair sprays (pump sprays) at maximum use concentrations up to 0.5%.
In practice, 95% to 99% of the droplets/particles released from cosmetic sprays have aerodynamic equivalent diameters > 10 µm, with propellant sprays yielding a greater fraction of droplets/particles below 10 µm, compared with pump sprays.
Therefore, most droplets/particles incidentally inhaled from cosmetic sprays would be deposited in the nasopharyngeal and bronchial regions and would not be respirable (i.e., they would not enter the lungs) to any appreciable amount.
Polyquaternium-6 is not restricted from use in any way under the rules governing cosmetic products in the European Union.
Non-Cosmetic uses of Polyquaternium-6:
Polyquaternium-6 is an FDA-approved indirect food additive, i.e., for use as a component of paper and paperboard in contact with aqueous and fatty foods (21 CFR 176.170).
As a pigment dispersant and/or retention aid in the manufacture of paper, Polyquaternium-6 is used at a level not to exceed 10 pounds of active polymer per ton of finished paper and paperboard.
As a pigment dispersant in coatings, it is used at a level not to exceed 3.5 pounds of active polymer per ton of finished paper and paperboard.
For use only as a flocculant in the manufacture of paper and paperboard, it is used at a level not to exceed 10 mg/l (10 ppm) of influent water.
Polyquaternium is the International Nomenclature for Cosmetic Ingredients designation for several polycationic polymers that are used in the personal care industry.
Polyquaternium is a neologism used to emphasize the presence of quaternary ammonium centers in the polymer.
INCI has approved at least 40 different polymers under the polyquaternium designation.
Different polymers are distinguished by the numerical value that follows the word "polyquaternium".
Polyquaternium-5, polyquaternium-7, and polyquaternium-47 are three examples, each a chemically different type of polymer.
The numbers are assigned in the order in which they are registered rather than because of their chemical structure.
Polyquaterniums find particular application in conditioners, shampoo, hair mousse, hair spray, hair dye, personal lubricant, and contact lens solutions.
Because they are positively charged, they neutralize the negative charges of most shampoos and hair proteins and help hair lie flat.
Their positive charges also ionically bond them to hair and skin.
Some have antimicrobial properties.
Appearance : Colorless to light yellow clear viscous liquid
Scent: Faint aldehydic smell
Solid: 40±1%
pH(1% water solution,25℃): 5–8
Viscosity (25℃): 5000–25000cps
What is Polyquaternium?
Polyquaternium is the International Nomenclature for Cosmetic Ingredients designation for several polycationic polymersthat are used in the personal care industry.
Polyquaternium is a neologism used to emphasize the presence of quaternary ammonium centers in the polymer.
INCI has approved at least 37 different polymers under the polyquaternium designation.
Different polymers are distinguished by the numerical value that follows the word “polyquaternium”.
Polyquaternium-5, polyquaternium-7, and polyquaternium-47 are three examples, each a chemically different type of polymer.
The numbers are assigned in the order in which they are registered rather than because of their chemical structure.
Polyquaternium-4:
Provides excellent combability, holding, gloss and antistat properties.
Polyquaternium-4 substantive to skin and hair and exhibits outstanding properties in hair care products.
Polyquaternium-4 is a tan powder that is water-soluble. (suggested use: 0.5 to 1%)
Polyquaternium-7 :
Leaves hair feeling soft.
Polyquaternium-7 is a thick viscous liquid with low odor. (suggested use: 2 to 5%)
Polyquaternium-10:
This is a cationic, water-soluble substantive conditioner for hair care.
Polyquaternium-10 provides film formation on hair and moisturization.
Polyquaternium-10 is non-irritating and compatible with a wide range of surfactants.
Polyquaternium-10 enables the formulation of clear products.
Polyquaternium-44:
This is a very efficient, multinational polymer for use in a variety of cleansing products to improve the wet combability of the hair and prevent electrostatic charging when the hair is dry.
Polyquaternium-44 also protects the hair by forming a shield around each hair so that its surface is less readily attacked.
Polyquaternium-44 conditions and provides a smooth silky feel to the hair.
The lather creaminess is significantly improved.
There are no drawbacks with fine hair regarding volume, accumulation and build-up when used at recommended use levels.
Polyquaternium-44 is a viscous clear amber liquid with low odor.
How does Polyquaternium 6 work hair?
Since they are positively charged, they neutralize the negative charges of most shampoos, relaxers, hair proteins etc. helping the hair to lay flat.
Their positive charge, ionically bond to the hair.
Polyquaternium 6 is particularly useful to use cationic polymers on hair exposed to high alkalinity relaxers to decrease damage to hair.
They attach to the hair and provide conditioning benefits such as ease of combing, hair alignment, elasticity and shine.
Polyquaternium also helps to reduce flyaways & static.
As always, choose your products carefully, get samples when you can, and see what works for your hair.
Chemical Name: Polyquaternium 6
Synonyms: N,N-Dimethyl-N-2-propenyl-2-propen-1-aminium Chloride Homopolymer; Diallyldimethylammonium Chloride Polymers; Accepta 2058; Additol VXT 3529; Agefloc ; Agequat 400; Amerfloc 487; Aquaserv AQ 299; Aronfloc C 70; Auxipon DD 25; Bufloc; Calgon; Cartafix; Cat-Floc; Catiofast ; Certrex 340; CinFix RDF; Conductive Polymer 261; Croscolor NOFF; Cysep 4022; Daidol EC 004; Danfix ; Diallyldimethylammonium Chloride Homopolymer; Diallyldimethylammonium Chloride Polymer; Diallyldimethylammonium Chloride-Desmodur 100-Zircosol AC 7 Copolymer; Dimethyldiallylammonium Chloride Homopolymer; Dimethyldiallylammonium Chloride Polymer; Fennofix 40; Floc 572; Flockstar LD 54; Floerger; Floquat; Floraquatgel; Gen Floc F 71100; Genamin PDAC; Glascol F 207; Highholder 604; Hydraid; Hydrex ; Induquat ECR 35L; Jayflo
CAS Number: 26062-79-3
Molecular Formula: (C₈H₁₆ClN)ₓ
Molecular Weight: (161.67)
Category: Research Tools; Materials;
Applications: Polyquaternium 6 is used as a coagulant aid in water treatment.
Polyquaternium-6 Poly(diallyl dimethyl ammonium chloride) Suggested Use:1. The reference dosage in hair care products: 1-3%2.
The reference dosage in skin care products: 1-5%3. The reference dosage Moisturizing cream, shaving cream: 1-2%4. The reference dosage hair dye and hair spray: 0.5-1%
Physical State: Liquid
State of Matter: Liquid
Form of Chemicals: Liquid
Usage/Application: Industrial
Purity: 98% Min
Appearance: Liquid
Cas-No: 26062-79-3
Standard: Industrial
Synonyms: Poly-Diallyldimethylammonium Chloride
Pack Type: Drum
Application/Usage: Industrial
Increased use of polyquaternium 6 in cosmetics:
The polyquaternium-6 market can be segmented into end-users, forms, ingredients, packing types and nature.
By the end users, polyquaternium-6 market can be categorized into Skin Care, Haircare, and wastewater treatment.
The polyquaternium-6 market can be segmented in different forms of polyquaternium-6 such as powder form and liquid form.
Ingredients of the polyquaternium-6 market can be segmented into Anti-static Agents, Conditioning Agents, Emollients Film Formers, Fixatives Lubricants / Slip Agents, Moisturizing Agents, Softening / Texturing Agents Thickeners & Stabilizers.
In the packaging type segment polyquaternium-6 is packed in bottle and bulk.
Nature of polyquaternium-6 segmented into organic and conventional.
Polyquaternium 6s functions (INCI):
Antistatic: Reduces static electricity by neutralizing the electrical charge on a surface
Film forming agent: Produces a continuous film on the skin, hair or nails
Suggested Uses of Polyquaternium 6::
1. The reference dosage in hair care products: 1-3%
2. The reference dosage in skin care products: 1-5%
3. The reference dosage Moisturizing cream, shaving cream: 1-2%
4. The reference dosage hair dye and hair spray: 0.5-1%
The specific amount determined according to the majority of cations, both amphoteric surfactant compatibility through specific test to determine the final ratio, in order to achieve the best results.
Polyquaternium-1: Ethanol, 2,2′,2″ -nitrilotris-, polymer with 1,4-dichloro-2-butene and N,N,N′,N′-tetramethyl-2-butene-1,4-diamine
Polyquaternium-2 : Poly[bis(2-chloroethyl) ether-alt-1,3-bis[3-(dimethylamino)propyl]urea]
Polyquaternium-4 : Hydroxyethyl cellulose dimethyl diallylammonium chloride copolymer; Diallyldimethylammonium chloride-hydroxyethyl cellulose copolymer
Polyquaternium-5: Copolymer of acrylamide and quaternized dimethylammoniumethyl methacrylate
Polyquaternium-6: Poly(diallyldimethylammonium chloride)
Polyquaternium-7: Copolymer of acrylamide and diallyldimethylammonium chloride
Polyquaternium-8: Copolymer of methyl and stearyl dimethylaminoethyl ester of methacrylic acid, quaternized with dimethylsulphate[2]
Polyquaternium-9 : Homopolymer of N,N-(dimethylamino)ethyl ester of methacrylic acid, quaternized with bromomethane
Polyquaternium-10: Quaternized hydroxyethyl cellulose
Polyquaternium-11: Copolymer of vinylpyrrolidone and quaternized dimethylaminoethyl methacrylate
Polyquaternium-12: Ethyl methacrylate / abietyl methacrylate / diethylaminoethyl methacrylate copolymer quaternized with dimethyl sulfate
Polyquaternium-13: Ethyl methacrylate / oleyl methacrylate / diethylaminoethyl methacrylate copolymer quaternized with dimethyl sulfate
Polyquaternium-14: Trimethylaminoethylmethacrylate homopolymer
Polyquaternium-15: Acrylamide-dimethylaminoethyl methacrylate methyl chloride copolymer
Polyquaternium-16: Copolymer of vinylpyrrolidone and quaternized vinylimidazole
Polyquaternium-17: Adipic acid, dimethylaminopropylamine and dichloroethylether copolymer
Polyquaternium-18: Azelaic acid, dimethylaminopropylamine and dichloroethylether copolymer
Polyquaternium-19: Copolymer of polyvinyl alcohol and 2,3-epoxypropylamine
Polyquaternium-20: Copolymer of polyvinyl octadecyl ether and 2,3-epoxypropylamine
Polyquaternium-22: Copolymer of acrylic acid and diallyldimethylammonium Chloride
Polyquaternium-24: Quaternary ammonium salt of hydroxyethyl cellulose reacted with a lauryl dimethyl ammonium substituted epoxide.
Polyquaternium-27: Block copolymer of Polyquaternium-2 and Polyquaternium-17
Polyquaternium-28: Copolymer of vinylpyrrolidone and methacrylamidopropyl trimethylammonium
Polyquaternium-29: Chitosan modified with propylen oxide and quaternized with epichlorhydrin
Polyquaternium-30: Ethanaminium, N-(carboxymethyl)-N,N-dimethyl-2-[(2-methyl-1-oxo-2-propen-1-yl)oxy]-, inner salt, polymer with methyl 2-methyl-2-propenoate
Polyquaternium-31: N,N- dimethylaminopropyl-N-acrylamidine quatemized with diethylsulfate bound to a block of polyacrylonitrile
Polyquaternium-32: Poly(acrylamide 2-methacryloxyethyltrimethyl ammonium chloride)
Polyquaternium-33: Copolymer of trimethylaminoethylacrylate salt and acrylamide
Polyquaternium-34: Copolymer of 1,3-dibromopropane and N,N-diethyl-N′,N′-dimethyl-1,3-propanediamine
Polyquaternium-35: Methosulphate of the copolymer of methacryloyloxyethyltrimethylammonium and of methacryloyloxyethyldimethylacetylammonium
Polyquaternium-36: Copolymer of N,N-dimethylaminoethylmethacrylate and buthylmethacrylate, quaternized with dimethylsulphate
Polyquaternium-37: Poly(2-methacryloxyethyltrimethylammonium chloride)
Polyquaternium-39: Terpolymer of acrylic acid, acrylamide and diallyldimethylammonium Chloride
Polyquaternium-42: Poly[oxyethylene(dimethylimino)ethylene (dimethylimino)ethylene dichloride]
Polyquaternium-43: Copolymer of acrylamide, acrylamidopropyltrimonium chloride, 2-amidopropylacrylamide sulfonate and dimethylaminopropylamine
Polyquaternium-44: 3-Methyl-1-vinylimidazolium methyl sulfate-N-vinylpyrrolidone copolymer
Polyquaternium-45: Copolymer of (N-methyl-N-ethoxyglycine)methacrylate and N,N-dimethylaminoethylmethacrylate, quaternized with dimethyl sulphate
Polyquaternium-46: Terpolymer of vinylcaprolactam, vinylpyrrolidone, and quaternized vinylimidazole
Polyquaternium-47: Terpolymer of acrylic acid, methacrylamidopropyl trimethylammonium chloride, and methyl acrylate
synonyms:
agefloc WT 20
calgon 261
calgon 261LV
dimethyl-bis(prop-2-enyl)azanium;chloride (poly)
lectrapel
merquat 100 polymer
merquat 106 polymer
percol 1697
poly 2-propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride
poly-N,N-dimethyl-N,N-diallylammonium chloride
poly(diallyl dimethyl ammonium chloride)
poly(diallyldimethylammonium chloride)
poly(dimethyl diallyl ammonium chloride)
poly(DMDAAC)
quaternium-40
2-Propen-1-aminium, N,N-dimethyl-N-2-propen-1-yl-, chloride (1:1), homopolymer
2-Propen-1-aminium, N,N-dimethyl-N-2-propen-1-yl-, chloride (1:1), homopolymer
2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, homopolymer
2-Propen-1-aminium,N,N-dimethyl-N-2-propenyl-,chloride,homopolymer
DIALLYLDIMETHYLAMMOMIUM CHLORIDE POLYMER
N,N-Dimethyl-N-2-propenyl-2-propen-1-aminium chloride
N,N-Dimethyl-N-2-propenyl-2-propen-1-aminium chloride homopolymer
N,N-Dimethyl-N-2-propenyl-2-propen-1-amonium chloride homopolymer
PDADMAC
Poly(diallyl dimethyl ammonium chloride); (20% in water) (low MW)
Poly(diallyldimethylammonium chloride)
Poly(diallyldimethylammoniumchloride)
Polydiallyldimethyl ammonium chloride
polymeric quaternary ammonium salt of dimethyl diallyl ammonium chloride
Polyquaternium-6
Poly(diallyl dimethyl ammonium chloride); (20% in water) (low MW)
2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, homopolymer
Color fixing agent GD-80
Poly (Dimethyldiallylammonium Chloride)
Poly 2-propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride
Polyquaternium-6
26062-79-3
Poly-N,N-dimethyl-N,N-diallylammonium chloride
Polyquaternium-6
cat-floc
poly(diallyl dimethyl ammonium chloride)
pas-h10
vpk402
Merquat.(R). 100
261lv
pbk1
cp261lv
merck261
PDADMAC
cp261
e261
polyquaternium-6
poly(N,N-dimethyl-N-2-propenyl-2-propene-1-aminium chloride)
dimethyldiallylammonium chloride homopolymer
CAS NO:26062-79-3
IUPAC names:
2-Propen-1-aminium, N,N-dimethyl-N-2-propen-1-yl-, chloride (1:1), homopolymer
2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, homopolymer
2-Propen-1-aminium,N,N-dimethyl-N-2-propenyl-,chloride,homopolymer
DIALLYLDIMETHYLAMMOMIUM CHLORIDE POLYMER
N,N-Dimethyl-N-2-propenyl-2-propen-1-aminium chloride
N,N-Dimethyl-N-2-propenyl-2-propen-1-aminium chloride homopolymer
N,N-Dimethyl-N-2-propenyl-2-propen-1-amonium chloride homopolymer
Poly(diallyldimethylammonium chloride)
Poly(diallyldimethylammoniumchloride)
Polydiallyldimethyl ammonium chloride
polymeric quaternary ammonium salt of dimethyl diallyl ammonium chloride
Polyquaternium-6
Other names:
2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, homopolymer
Color fixing agent GD-80
Poly (Dimethyldiallylammonium Chloride)
Poly 2-propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride
Polyquaternium-6
Polydadmac