Sodium bis(2-ethylhexyl) sulfosuccinate = AOT = Bis(2-ethylhexyl) Sulfosuccinate Sodium Salt = Docusate = dioctyl calcium sulfosuccinate
CAS Number: 577-11-7
Molecular Formula: C20H37NaO7S
Molecular Weight: 444.56
Sodium bis(2-ethylhexyl) sulfosuccinate is used as wetting agent, and solubilizer used in the drug, cosmetics, and food industries.
Sodium bis(2-ethylhexyl) sulfosuccinate has also been used in laxatives and as cerumenolytics.
Sodium bis(2-ethylhexyl) sulfosuccinate is usually administered as either the calcium, potassium, or sodium salt.
Bis(2-ethylhexyl) Sulfosuccinate Sodium Salt, also known as Docusate or dioctyl calcium sulfosuccinate, is a laxative used to treat constipation by allowing more water to be absorbed by the feces.
Sodium bis(2-ethylhexyl) sulfosuccinate is a laxative used to treat constipation, for constipation due to the use of opiates it maybe used with a stimulant laxative, can be taken by mouth or rectally.
Applications of Sodium bis(2-ethylhexyl) sulfosuccinate:
A high volume example is sodium bis(2-ethylhexyl) sulfosuccinate.
This is perhaps best known as the laxative docusate, however its main use is as a surfactant for which it finds common use in personal-care and household-care products, often under the name Aerosol-OTs.
Sodium bis(2-ethylhexyl) sulfosuccinate is unusual in that it is able to form microemulsions without the use of co-surfactants, and it has a rich variety of aqueous-phase behavior including multiple liquid crystalline phases.
Molecular Weight: 466.5
Hydrogen Bond Donor Count: 1
Hydrogen Bond Acceptor Count: 7
Rotatable Bond Count: 14
Exact Mass: 466.19771322
Monoisotopic Mass: 466.19771322
Topological Polar Surface Area: 143 Ų
Heavy Atom Count: 30
Formal Charge: 0
Complexity: 551
Isotope Atom Count: 0
Defined Atom Stereocenter Count: 0
Undefined Atom Stereocenter Count: 3
Defined Bond Stereocenter Count: 0
Undefined Bond Stereocenter Count: 0
Covalently-Bonded Unit Count: 3
Compound Is Canonicalized: Yes
Sodium bis(2-ethylhexyl) sulfosuccinate (known as AOT) is a commercially available surfactant commonly used in agrochemicals.
Besides the principal diester surfactant, Sodium bis(2-ethylhexyl) sulfosuccinate contains two surface-active isomeric monoester by-products, which may influence the surfactant’s overall properties.
This work investigates whether the purity of the surfactant affects its ability to stabilize an agrochemical formulation.
The concentrations of the diester and two monoester impurities in batches of commercial AOT product from several suppliers were determined quantitatively by liquid chromatography–mass spectrometry.
The tested batches showed different contents of the monoesters.
Samples of a model agrochemical formulation containing the AOT product formed more sediment during storage when the content of monoesters in the surfactant was high.
The supplier of an commercial AOT product could be traced by analysis of the monoester content of either the raw product or the aged agrochemical formulation.
Product Number: S0139
Purity / Analysis Method: >95.0%(T)
Molecular Formula / Molecular Weight: C20H37NaO7S = 444.56
Physical State (20 deg.C): Solid
Store Under Inert Gas: Store under inert gas
Condition to Avoid: Hygroscopic
CAS RN: 577-11-7
Reaxys Registry Number: 4117588
PubChem Substance ID: 87575741
Merck Index (14): 3401
MDL Number: MFCD00012455
About Sodium bis(2-ethylhexyl) sulfosuccinate helpful information:
Sodium bis(2-ethylhexyl) sulfosuccinate is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 10 000 tonnes per annum.
Sodium bis(2-ethylhexyl) sulfosuccinate is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
Consumer Uses of Sodium bis(2-ethylhexyl) sulfosuccinate:
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following products: coating products, fillers, putties, plasters, modelling clay, washing & cleaning products, adhesives and sealants, finger paints and fertilisers.
Other release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Article service life of Sodium bis(2-ethylhexyl) sulfosuccinate:
Other release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).
Sodium bis(2-ethylhexyl) sulfosuccinate can be found in products with material based on: fabrics, textiles and apparel (e.g. clothing, mattress, curtains or carpets, textile toys), plastic (e.g. food packaging and storage, toys, mobile phones), wood (e.g. floors, furniture, toys) and leather (e.g. gloves, shoes, purses, furniture).
Widespread uses by professional workers of Sodium bis(2-ethylhexyl) sulfosuccinate:
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following products: washing & cleaning products, polishes and waxes and fertilisers.
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following areas: mining, agriculture, forestry and fishing, formulation of mixtures and/or re-packaging and municipal supply (e.g. electricity, steam, gas, water) and sewage treatment.
Sodium bis(2-ethylhexyl) sulfosuccinate is used for the manufacture of: chemicals, textile, leather or fur, plastic products and food products.
Other release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Formulation or re-packing of Sodium bis(2-ethylhexyl) sulfosuccinate:
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following products: metal working fluids, polymers, lubricants and greases, hydraulic fluids, plant protection products, pH regulators and water treatment products and textile treatment products and dyes.
Sodium bis(2-ethylhexyl) sulfosuccinate has an industrial use resulting in manufacture of another substance (use of intermediates).
Release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate can occur from industrial use: formulation of mixtures, as an intermediate step in further manufacturing of another substance (use of intermediates), in processing aids at industrial sites, as processing aid, for thermoplastic manufacture and formulation in materials.
Uses at industrial sites of Sodium bis(2-ethylhexyl) sulfosuccinate:
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following products: polymers, lubricants and greases, washing & cleaning products, textile treatment products and dyes, pH regulators and water treatment products, metal working fluids, leather treatment products and hydraulic fluids.
Sodium bis(2-ethylhexyl) sulfosuccinate is used in the following areas: mining, agriculture, forestry and fishing, municipal supply (e.g. electricity, steam, gas, water) and sewage treatment and formulation of mixtures and/or re-packaging.
Sodium bis(2-ethylhexyl) sulfosuccinate is used for the manufacture of: chemicals, textile, leather or fur, plastic products and food products.
Release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate can occur from industrial use: in processing aids at industrial sites, in the production of articles, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid, formulation of mixtures and manufacturing of the substance.
Manufacture of Sodium bis(2-ethylhexyl) sulfosuccinate:
Release to the environment of Sodium bis(2-ethylhexyl) sulfosuccinate can occur from industrial use: manufacturing of the substance, formulation of mixtures, in processing aids at industrial sites, as an intermediate step in further manufacturing of another substance (use of intermediates), as processing aid and for thermoplastic manufacture.
The utilization of conventional water-soluble surfactants for the stabilization of CO2 foams has been limited by the low injectability of low-permeability reservoirs.
In this study, the anionic surfactant sodium bis(2-ethylhexyl) sulfosuccinate (AOT) was used as the CO2-soluble surfactant to stabilize CO2 foams in the presence of ethanol.
The phase equilibrium relationships of the AOT/ethanol/CO2 system and the partition coefficient of AOT between supercritical CO2 (SC-CO2) and water were measured through a fully visible pressure–volume–temperature (PVT) cell.
In addition, the effects of the ethanol content on the partition coefficient and interfacial tension (IFT) were studied.
Furthermore, a laboratory apparatus was developed to measure the viscosity and injection performance of AOT dissolved in an aqueous or SC-CO2 solution and SC-CO2 foams.
The experimental data show that addition of ethanol can significantly improve the solubility of AOT in SC-CO2 and increase the partition coefficient of AOT.
The IFT tests show that the ethanol content affects the critical micelle concentration (cmc) and IFT at cmc (γcmc) differently: with ethanol addition, γcmc decreases, while the cmc first decreases and then increases.
The dissolution of AOT in SC-CO2 with ethanol could lead to a 3-fold increase for SC-CO2 viscosity, while the formation of SC-CO2 foam could result in an increase for viscosity of approximately 50–200 times.
Finally, the core flooding results show that dissolved AOT in SC-CO2 could significantly improve the surfactant injectivity in tight rocks and interact with the formation water in situ to form SC-CO2 foams, controlling the mobility of the CO2.
In addition, the performance of SC-CO2 foams could be governed by altering the ethanol content to adjust the surfactant partition coefficient.
Product Name: Bis(2-ethylhexyl) sulfosuccinate sodium salt
Synonyms
1,4-bis(2-Ethylhexyl) sodium sulfosuccinate
bis(2-Ethylhexyl) s sodium sulfosuccinate
bis(2-Ethylhexyl) sulfosuccinate sodium salt
Butanedioic acid, sulfo-1,4-bis(2-ethylhexyl) ester, sodium salt
Sobital
Sodium bis(2-ethylhexyl) sulfosuccinate
CAS: 577-11-7
Formula: C20H37NaO7S
Molecular Weight: 444.55
EINECS: 209-406-4
RTECS: WN0525000
RTECS Class: Reproductive Effector; Primary Irritant
Merck: 12,3460
Beilstein/Gmelin: 4117588
Beilstein Reference: 3-04-00-00071
Physical and Chemical Properties of Sodium bis(2-ethylhexyl) sulfosuccinate:
Appearance: Odorless colorless to white waxy solid.
Solubility in water: 15 g/L (30 C)
Density: 1.1 g/cm3
Usage of Sodium bis(2-ethylhexyl) sulfosuccinate: Wetting agent in industrial, pharmaceutical, cosmetic & food applications, dispersing and solubilizing agent in foods, adjuvant in tablet formation.
Vapor Density: >1
Odor threshold: Odorless
Dioctyl sodium sulfosuccinate is a common ingredient in consumer products, especially laxatives of the stool softener type.
Dioctyl sulfosuccinate sodium salt is used to make a microemulsion with CAPSO for the electrophoresis detection of natural and synthetic estrogens. Used to prepare reverse micelles.
First Aid Measures of Sodium bis(2-ethylhexyl) sulfosuccinate:
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Skin: Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids.
Handling and Storage of Sodium bis(2-ethylhexyl) sulfosuccinate:
Storage: Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from acids. Keep away from strong bases.
Handling: Use with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Hazards Identification of Sodium bis(2-ethylhexyl) sulfosuccinate:
Ingestion: Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation: Causes respiratory tract irritation.
Skin: Exposure may cause irritation and possible burns.
Eyes: Contact with eyes may cause severe irritation, and possible eye burns.
Hazards: Vapors are heavier than air and may travel along the ground or be moved by ventilation and ignited by heat, pilot lights, other flames and ignition sources at locations distant from material handling point. Never use welding or cutting torch on or near drum (even empty) because product (even just residue) can ignite explosively.
Exposure Controls/Personal Protection of Sodium bis(2-ethylhexyl) sulfosuccinate:
Personal Protection
Eyes: Wear chemical goggles and a face shield. Skin: Wear appropriate gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.
Poison Class: 4
Fire Fighting Measures of Sodium bis(2-ethylhexyl) sulfosuccinate:
Fire Fighting: Extinguish fire using regular foam, carbon dioxide, dry chemical. Wear a self-contained breathing apparatus with a full facepiece operated in the positive pressure demand mode with appropriate turn-out gear and chemical resistant personal protective equipment. Refer to the personal protective equipment section of this MSDS.
Upper exp. limit: 12
Lower exp. limit: 2
Accidental Release Measures of Sodium bis(2-ethylhexyl) sulfosuccinate:
Small spills/leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.
Stability and Reactivity of Sodium bis(2-ethylhexyl) sulfosuccinate:
Stability: Stable under normal shipping and handling conditions.
Incompatibilities: Strong acid, strong bases and strong oxidizers.
Decomposition: Carbon monoxide, oxides of sulfur, carbon dioxide.
Sodium sulfosuccinate esters:
Sodium sulfosuccinate esters are organic compounds with the formula NaO3SCH(CO2R')CH2CO2R where R and R' can be H or alkyl groups.
They comprise a large class of surfactants and emulsifiers used in cosmetics, pharmaceuticals, and cleaning agents.
They are colorless salts.
These materials can be further classified into monoesters (R' = H, R = alkyl) and diesters (R and R' = alkyl).
Synthesis:
They are produced by treatment of maleic anhydride with alcohols.
The resulting mono or diesters are then treated with sodium sulfite, which, concomitant with protonation, adds to the C=C bond.
The effect of a fluorinated sodium bis(2-ethylhexyl) sulfosuccinate (aerosol-OT, AOT) analogue surfactant (sodium salt of bis(2,2,3,3,4,4,5,5- octafluoro-1-pentanol) sulfosuccinate) on the interfacial layer of supercritical CO2 + water and supercritical CO2 + Ni-plating solution systems was investigated by measuring via the capillary rise method.
These interfacial tensions were measured in the pressure range of (0.1 to 20.0) MPa at multiple temperatures for each of five interfaces: (1) CO2 + water system at (293.15, 298.15, 311.15, and 344.15) K; (2) CO2 + Ni-plating solution system at (313.15, 328.15, and 344.15) K; (3) CO2 + Ni-plating solution + F-AOT surfactant (0.1 and 0.3 mass %) system at (313.15, 328.15, and 344.15) K; (4) CO2 + Ni-plating solution + ethanol (10 and 20 vol %) system at 328.15 K; and (5) CO2 + Ni-plating solution + F-AOT surfactant (0.1 mass %) + ethanol (10 vol %) system at (313.15, 328.15, and 344.15) K.
The reliability of the apparatus was confirmed by comparing the experimental data with literature data for the CO2 + water system at (311.15 and 344.15) K The individual addition of the F-AOT surfactant and ethanol reduced the interfacial tension for the CO2 + Ni-plating solution system; however, the simultaneous addition of these two substances caused the opposite effect on the interfacial tension.
MELTING POINT: 173-179 c
ODOR: wh. wax-like solid, char. octyl alcohol odor
MOLECULAR WEIGHT: 445.63
FREELY SOLUBLE: in alcohol, glycerol, ccl4, acetone, xylene, hexane
NOTES:
Use: CLEANSING, EMULSIFYING, HYDROTROPE, SURFACTANT
CLASS: surfactants - Esters - Ethoxylates
Synonyms
Sodium bis(2-ethylhexyl)sulfosuccinate
SCHEMBL51224
Sodium di-(2-ethylhexyl)-sulfosuccinate
Aerosol OT
Colace
DEH Na SS
DEH-Na-SS
diethylhexyl sodium sulfosuccinate
Dioctyl Sulfosuccinate
Dioctyl Sulfosuccinate, Sodium
Dioctyl Sulfosuccinates
Dioctyl Sulfosuccinic Acid
Dioctyl Sulfosuccinic Acid, Ammonium Salt
Dioctyl Sulfosuccinic Acid, Barium Salt
Dioctyl Sulfosuccinic Acid, Calcium Salt
Dioctyl Sulfosuccinic Acid, Magnesium Salt
Dioctyl Sulfosuccinic Acid, Potassium Salt
Dioctyl Sulfosuccinic Acid, Sodium Salt
Dioctylsulfosuccinate
Dioctylsulphosuccinate, Sodium
Docusate
Docusate Calcium
Docusate Potassium
Docusate Sodium
DOSS
Sodium Bis(2-ethylhexyl)sulfosuccinate
Sodium Dioctyl Sulfosuccinate
Sodium Dioctylsulphosuccinate
Sodium Sulfosuccinate, Diethylhexyl
Sulfosuccinate, Diethylhexyl Sodium
Sulfosuccinate, Dioctyl
Sulfosuccinates, Dioctyl
Sulfosuccinic Acid bis(2-Ethylhexyl) Ester
1,4-Bis[(2-ethylhexyl)oxy]-1,4-dioxo-2-butanesulfonic acid - sodium (1:1) [ACD/IUPAC Name]
1,4-Bis[(2-ethylhexyl)oxy]-1,4-dioxo-2-butansulfonsäure -natrium (1:1) [German] [ACD/IUPAC Name]
Acide 1,4-bis[(2-éthylhexyl)oxy]-1,4-dioxo-2-butanesulfonique - sodium (1:1) [French] [ACD/IUPAC Name]
Butanedioic acid, 2-sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt (1:1) [ACD/Index Name]
sodium bis(2-ethyl-1-hexyl) sulfosuccinate
sodium bis(2-ethylhexyl) sulfosuccinate
aerosol OT-100
atlas WA-100
butanedioic acid, 2-sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt (1:1)
butanedioic acid, sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt
chimin DOS 70
complemix 100
depasol AS-27
di-(2-ethylhexyl) sodium sulfosuccinate
di(2-ethylhexyl)sulfosuccinic acid, sodium salt
dioctyl ester of sodium sulfosuccinate
dioctyl ester of sodium sulfosuccinic acid
dioctyl sulfosuccinate sodium salt
docusate sodium
docusate sodium salt
empimin OT
bis( ethylhexyl) ester of sodium sulfosuccinic acid
bis(2- ethylhexyl) S-sodium sulfosuccinate
1,4-bis(2-ethylhexyl) sodium sulfosuccinate
bis(2- ethylhexyl) sodium sulfosuccinate
bis(2- ethylhexyl) sulfosuccinate sodium salt
bis(2- ethylhexyl) sulfosuccinate, sodium salt
bis(2- ethylhexyl) sulphosuccinatesodium salt
bis(2- ethylhexyl)sodium sulfosuccinate
imbirol OT/NA 70
octowet 60
octowet 65
octowet 70
schercowet DOS-70
sodium 1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate
sodium 1,4-bis[(2-ethylhexyl)oxy]-1,4-dioxo-2-butanesulfonate
sodium 1,4-bis[(2-ethylhexyl)oxy]-1,4-dioxobutane-2-sulfonate
sodium 2-ethyl hexyl sulfosuccinate
sodium bis(2-ethylhexyl) sulfosuccinate
sodium di-(2-ethylhexyl) sulfosuccinate
sodium di(2-ethylhexyl) sulfosuccinate
sodium dioctyl sulfosuccinate
sodium docusate
solusol 100
stepwet DOS-70
succinic acid, sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt
sulfimel DOS
sulfobutanedioic acid 1,4-bis(2-ethylhexyl) ester sodium salt
sulfobutanedioic acid bis(2-ethylhexyl ester) sodium salt
sulfosuccinic acid 1,4-bis(2-ethylhexyl) ester S-sodium salt
sulfosuccinic acid bis(2-ethylhexyl) ester sodium salt
sulfosuccinic acid, bis(2-ethylhexyl)ester sodium salt
sulfosuccinic acid, di-(2-ethylhexyl) ester, sodium salt
triumphnetzer DEG
triumphnetzer EH
triumphnetzer ETH
triumphnetzer PG
Butanedioic acid,2-sulfo-,1,4-bis(2-ethylhexyl) ester,sodium salt (1:1)
Succinic acid,sulfo-,1,4-bis(2-ethylhexyl) ester,sodium salt
Butanedioic acid,sulfo-,1,4-bis(2-ethylhexyl) ester,sodium salt
Aerosol OT-B
SV 102
Aerosol OT
Alphasol OT
Bis(2-ethylhexyl) sodium sulfosuccinate
Bis(2-ethylhexyl) S-sodium sulfosuccinate
1,4-Bis(2-ethylhexyl) sodium sulfosuccinate
Colace
Constonate
Coprol
Dioctlyn
Dioctylal
Diomedicone
Diosuccin
Diovac
Diox
Disonate
Doxol
Doxinate
Dulsivac
Duosol
Konlax
Kosate
Laxinate
Molofac
Nevax
Regutol
Revac
Sobital
Softil
Sulfosuccinic acid bis(2-ethylhexyl)ester sodium salt
Velmol
Sodium bis(ethylhexyl) sulfosuccinate
Bis(2-ethylhexyl) sulfosuccinate sodium salt
Sodium 1,4-bis(2-ethylhexyl) sulfosuccinate
Di-2-ethylhexyl sodium sulfosuccinate
Sodium dioctyl sulfosuccinate
Dioctyl sodium sulfosuccinate
DSS;Complemix
Dioctyl-Medo Forte
Diotilan;Molatoc
Molcer
Norval
Soliwax
Solusol
Sulfimel DOS
Waxsol
Di(2-ethylhexyl) sulfosuccinate sodium salt
AOT I;Dioctyl sulfosuccinate sodium
Triton GR 5
Triton GR 7
Vatsol OT
Rapisol
Aerosol GPG
Dioctyl sulfosuccinate sodium salt
Obston
Mervamine
Defilin
Aerosol OT 75
Sodium di(2-ethylhexyl) sulfosuccinate
Berol 478
Sanmorin OT 70
Alcopol O
Wetaid SR
Tex-Wet 1001
Manoxol OP
Docusate sodium
Nikkol OTP 70
Humifen WT 27G
Warcowet 060
Sodium 1,2-bis(2-ethylhexyloxycarbonyl)-1-ethanesulfonate
SBO
Bis(2-ethylhexyl) sodiosulfosuccinate
Celanol DOS 75
Rapisol B 80
Aerosol OT-S
Lankropol KO 2
AOT
Nissan Rapisol B 80
Nissan Rapisol
Nissan Rapisol B 30
Rapisol B 30
Nonit
DOSS 70
Solovet
Celanol DOS 65
Triton GR 5M
Sunnol LDF 110
Triton GR 7M
Aerosol OT 100
Spilon 8
Monawet MO 70
Drewfax 007
Newcol 290M
Pelex OT-P
Sulfosuccinic acid di-2-ethylhexyl ester sodium salt
Pelex OT
DOSS
Marlinat DF 8
TKB 20
Succinate STD
Secosol DOS 70
Karawet DOSS
Gemtex SC
Monawet MO 70E
Isoprotanc
Airrol CT 1
Astrowet O 75
OT
Newcol 291EG
Aerosol OT 94
Adekacol EC 8600
Astrowet O 70PG
Nikkol OTP 100
OTP 75
Manoxol OT
Nikkol OTP 75
Rewopol S
Regulatory process names
Docusate sodium
Docusate sodium
docusate sodium
Sodium dioctylsulphosuccinate
CAS names
Butanedioic acid, 2-sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt (1:1)
IUPAC names
1,4-bis(2-ethylhexoxy)-1,4-dioxobutane
1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonic acid
1,4-bis(2-ethylhexyl) 2-[(sodiooxy)sulfonyl]butanedioate
1,4-Bis(2-ethylhexyl)sulfobutanedioate, sodium salt
1,4-BIS[(2-ETHYLHEXYL)OXY]-1,4-DIOXOBUTANE-2-SULFONIC ACID SODIUM(+1) (1:1)
Agent T284
BIOMAST
bis(2-ethylhexyl)sulfosuccinic acid sodium salt
bis-2-ethylhexyl sodium sulfosuccinate
Butanedioic acid, 2-sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt (1:1)
Butanedioic acid, sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt
Butanedioic acid, sulfo-,1,4-bis (2-ethylhexyl)ester, sodium salt
Butanedioic acid,sulfo-1.4-bis(2-ethylhexyl)ester, sodium salt
Di-(2-ethylhexyl) Sodium Sulfosuccinate
Di-2-ethylhexyl sodium sulfosuccinate
DIOCTYL SODIUM SULFOSUCCINATE
dioctyl sodium sulfosuccinate
Dioctyl sodium sulphosuccinate
dioctyl sulfosuccinate
Dioctyl sulfosuccinate sodium salt
Dioctyl sulfosuccinate sodium salt
Dioctylnatriumsulfosuccinat
DOCUSATE SODIUM
Docusate sodium
docusate sodium
Docusate Sodium
Docusate sodium
docusate sodium
DOSS
sodium 1,4-bis((2-ethylhexyl)oxy)-1,4-dioxobutane-2-sulfonate
Sodium 1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate
sodium 1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate
sodium 1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate.
sodium 1,4-bis[(2-ethylhexyl) oxy]-1,4-dioxobutane-2-sulfonate
Sodium 1,4-bis[(2-ethylhexyl)oxy]-1,4-dioxo-2-butanesulfonate
sodium 1,4-bis[(2-ethylhexyl)oxy]-1,4-dioxobutane-2-sulfonate
sodium 1,4-bis[(2-ethylhexyl)oxy]-1,4-dioxobutane-2-sulfonate
SODIUM DI(2-ETHYLHEXYL) SULFOSUCCINATE
Sodium Di(2-ethylhexyl) Sulfosuccinate
Sodium di(2-ethylhexyl) sulphosuccinate
Sodium Dialkyl Sulfosuccinate
SODIUM DIOCTYL SULFOSUCCINATE
Sodium dioctyl sulfosuccinate
Sodium Dioctyl sulphosuccinate
Sodium dioctyl Sulphosuccinate
Sodium dioctyl sulphosuccinate
Sodium docusate
Sodium Docusate
SODIUM,1,4-BIS(2-ETHYLHEXOXY)-1,4-DIOXOBUTANE-2-SULFONATE
Sodium-bis-(2-ethylhexyl)sulphosuccinate
sodium; 1,2-bis-(2-ethyl-hexyloxycarbonyl)-ethanesulfonate
sodium;1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate
SULFOBERNSTEINSÄUREDIESTER, 2-ETHYLHEXYL, NA-SALZ
Sól sodowa sulfobursztynianu dioktylu
Trade names
Agent T284
DOKUSATNATRIUM
SABOSOL DOS
Spolion 8
Zwilżacz SBO
Other names
Butanedioic acid, 2-sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt (1:1)
Butanedioic acid, sulfo-, 1,4-bis(2-ethylhexyl) ester, sodium salt