Steareth-6 is a non-ionic surfactant from the group of ethoxylated cetearyl alcohols.
Steareth-6 is a component of many cosmetic formulations, where it acts as an emulsifier, stabiliser and dispersant.
Steareth-6 is a polyethylene glycol ether of Stearyl Alcohol (q.v.).
CAS Number: 9005-00-9
EC Numbers: 500-017-8
Formula: (C2 H4 O)mult-C18 H38 O
Steareth-6 is a chemical compound, carbon chains alkyl polyethylene glycol (PEG (Polyethylene glycol)) ether of ethoxylated fatty stearyl alcohol (6 mol), from palm kernel oils and coconut oils and fats.
Steareth-6 is a mixture of a derivative of fatty alcohol cetearyl alcohol and a fatty acid from olives.
Steareth-6 works to make emulsions stable and offers skin-smoothing emollient properties.
Steareth-6 is often used in soaps and shampoos because of its ability to attract both oil and water.
The functions of Steareth-6:
SURFACTANT - CLEANSING : wetting body surfaces, emulsifying or solubilizing oils, and suspending soil (generally, such ingredients contribute to the foaming and lathering properties of cleansing products).
SURFACTANT - EMULSIFYING : helping suspensions or dispersions of liquids in a second liquid by reducing the surface tension of the substances to be emulsified.
Physical and chemical properties and general characteristics of Steareth-6:
A chemical compound with the INCI (International Cosmetic Ingredient Nomenclature) name Steareth-6 is an ethoxylated cetearyl alcohol that belongs to a large group of non-ionic surfactants.
The chemical name of this compound is ethoxylated cetostearyl alcohol, and also macrogol cetostearyl ether.
The physical and chemical properties of Steareth-6:
appearance: solid with the consistency of wax,
colour: white or yellow-white (at @ 20 to 25 ᵒC),
sparingly soluble in water,
soluble in methylene chloride and ethanol,
hydroxyl value: 100-134 mg KOH/g,
acid value: ≤1.0 mg KOH/g,
saponification value: ≤3.0 mg KOH/g.
Application of Steareth-6:
Steareth-6 meets a number of restrictive quality requirements previously defined in the pharmacy code.
They have been compiled and published in the latest edition of the European Pharmacopoeia.
Steareth-6 is included in formulations used in the cosmetic and pharmaceutical industries and in dermocosmetics.
Steareth-6 as a surfactant shows very good dispersing, solubilising and thickening properties.
These features result from the chemical structure of this compound, typical for surfactants – they have a hydrophilic moiety (with a strong affinity for water) and a hydrophobic moiety (strongly interacting with the oil phase).
Steareth-6 is the polyethylene glycol ether of Stearyl Alcohol that conforms to the formula: CH3(CH2)17(OCH2CH2)nOH, where n has an average value of 6.
As a dispersant, Steareth-6 evenly disperses the particles of the individual ingredients in the emulsion, ensuring homogeneity of the formulation.
In addition, as a solubiliser, Steareth-6 facilitates the dissolution of the individual components in the solvent.
Solubilisers such as Steareth-6 are especially useful in cosmetics of water content up to 95%.
Thanks to the solubilisers, it is possible to introduce fatty substances, fragrances and other substances insoluble in water.
Very good emulsifying properties of Steareth-6 determine its use to create and stabilise water-in-oil emulsions – water particles suspended in the oil phase).
Emulsifiers, such as Steareth-6, accumulate at the phase boundary, thereby lowering the surface tension and allowing the fusion of phases with different chemical characteristics (water phase and oil phase).
These types of emulsifiers (dedicated for water-in-oil emulsions) are used, for example, for the production of ointments or dermocosmetics, where the water-soluble active substance requires homogeneous dispersion in the hydrophobic phase, which is usually an oil base.
Products containing Steareth-6:
ointments,
antiseptic ointments,
lotions,
oils,
creams,
dermocosmetics.
Steareth-6 is a non-ionic surfactant from the group of ethoxylated cetearyl alcohols.
KEYWORDS:
9005-00-9, 500-017-8, Steareth, emulgen 306P, 2-octadecoxyethanol (peg-6), peg-6 stearyl ether, poly(oxy-1 2-ethanediyl) .alpha.-octadecyl-.omega.-hydroxy- (6 mol EO average molar ratio), polyethylene glycol (6) stearyl ether, HEXAETHYLENE GLYCOL, MONOSTEARYL ETHER
Steareth-6 is a nonionic emulsifier that reduces the surface tension of the substances being emulsified.
Steareth-6 works best in oil in water formulations with low viscosity (thickness), such as liquidy cremes, oil-free lotions and even spray on emulsions.
The lipids contained in Steareth-6 derive from olive oil, and are thought to have the highest compatibility with skin out of all other natural lipids.
Steareth-6 quickly penetrates the skin to provide a deep hydration that has a light and non-greasy feel.
Steareth-6 gives formulations good spreadability, and is compatible over a broad pH range.
Products with Steareth-6:
hair color and bleaching
shampoo
conditioner
detangler
What Is Steareth-6?
The Steareth ingredients (Steareth-2, Steareth-4, Steareth-6, Steareth-7, Steareth-10, Steareth-11, Steareth-13, Steareth-15, Steareth-20) are polyethylene glycol ethers of stearci acid.
They are waxy compounds.
In cosmetics and personal care products, Steareth ingredients are used in the formulation of personal cleanliness products and deodorants, as well as suntan, fragrance, skin, eye and hair products.
Why is Steareth-6 used in cosmetics and personal care products?
When added to cosmetics and personal care products, the Steareth ingredients reduce the interactive forces between molecules of other liquids so that an emulsion is formed.
If an ingredient such as a Steareth is not added to some personal care products, the ingredients in the product would separate like some salad dressings.
Scientific Facts about Steareth-6:
The Steareths are prepared by reacting ethylene oxide with stearyl alcohol where the numerical value in the name corresponds to the average number of units of ethylene oxide.
For example, Steareth-2 is prepared using an average of 2 units of ethylene oxide reacted with stearyl alcohol.
INCI name: STEARETH-6
Classification: Ethoxylated compound
CAS Numbers:
9005-00-9 (Generic)
2420-29-3
EC/List Numbers:
500-017-8
Technical Names:
3,6,9,12,15,18-Hexaoxahexatriacontan-1-ol
Polyoxyethylene (6) Stearyl Ether
Octadecan-1-ol, Ethoxylated
PEG-6 Stearyl Ether
Polyethylene Glycol 300 Stearyl Ether
Polyoxyethylene Monooctadecyl Ether
Steareth-6 (INCI)
Product Categories:
Cleaning Products
Substance information:
"Steareth-" refers to a PEG-(polyethylene glycol-) ether of stearyl alcohol or isostearyl alcohol.
The number behind "steareth-" refers to the average number of molecular units -CH2-CH2-O-.
Background information on use in cosmetics:
Surfactants are so-called detergent substances and have a major significance in cosmetics for the cleansing of the skin and hair.
Surfactants are substances which, based on their molecular structure, are able to reduce the surface tension of a liquid.
In this way it is possible that two actually not mixable substances, such as oil and water, can be finely mixed.
Because of their properties, surfactants have manifold uses in cosmetics: they can cleanse, produce foam and act as emulsifiers and mix substances with one another.
In shampoos, shower gels and soaps, surfactants are, for instance, used to wash fat and soil particles with water off from the body.
Surfactants are also used in toothpaste.
Here they promote during tooth cleaning the rapid and full dissolution and distribution of the paste in the mouth.
The surfactants used in cosmetic products are primarily produced synthetically on the basis of vegetable raw materials.
Surfactants are often used in combination to equally meet all desired requirements – like dissolution of soil and formation of foam in combination with a good skin tolerance – in the best possible manner.
Through a skilled combination of a surfactant – viewed on its own – with unfavourable skin tolerance but a very good soil removal property with a very mild, skin protecting surfactant altogether a product with good cleansing properties and the same good skin tolerances is obtained.
Polyethylene glycols (INCI: PEG-...) are poly condensation products of ethylene glycol, or polymerisation products of ethylene oxide.
The number added to the name refers to the mean number of ethylene oxide units in the substance.
The consistency of the PEG derivatives is increasingly solid with a growing degree of polymerisation.
PEGs with a mean molar mass of up to 600 g/mol are liquid, up to 1,000 g/mol wax-like and from 4,000 g/mol solid wax-like substances.
By mixing solid and liquid components, products of a creamy consistency are obtained which are used as water-free and water rinse-off bases.
With growing molar mass water solubility and hygroscopicity (ability to absorb moisture) of the polyethylene glycols decrease.
Emulsifiers are often used in cosmetics as excipients.
They allow actually unmixable components like oil and water to be brought in a permanently stable emulsion.
In this way both aqueous and oily care and active ingredients can be used in one and the same product in cosmetics.
Emulsifiers are able to do that since their molecules consist of a lipophilic and a hydrophilic part.
In this way they can reduce the interfacial tension which actually exists between two incompatible substances like fat and water.
Emulsifiers are, more particularly, used for creams, lotions and cleansing agents.
At present emulsifiers are, however, more than only excipients which keep an emulsion stable.
Fatty acid esters on the basis of sugar, lecithin or glycerin monodistearate contribute, for instance, to improving the moisture balance of the skin and are, therefore, also considered as cosmetic active ingredients.
Steareth-6's functions (INCI):
Emulsifying agent:
Steareth-6 promotes the formation of intimate mixtures between immiscible liquids by modifying the interfacial tension (water and oil)
Surfactant:
Steareth-6 reduces the surface tension of cosmetics and contributes to the even distribution of the product during use
Safety Information about Steareth-6:
The Food and Drug Administration (FDA) permits fatty alcohols (including stearic alcohol) reacted with polyethylene glycol to be used as indirect food additives as components of textiles and textile fibers.
The safety of Steareth-2, Steareth-4, Steareth-6, Steareth-7, Steareth-10, Steareth-11, Steareth-13, Steareth-15 and Steareth-20 has been assessed by the Cosmetic Ingredient Review (CIR) Expert Panel.
The CIR Expert Panel evaluated the scientific data and concluded that these ingredients were safe as cosmetic ingredients in the present practices of use and concentration.
In 2006, as part of the scheduled re-evaluation of ingredients, the CIR Expert Panel considered available new data on the Steareth ingredients and reaffirmed the above conclusion.
More safety Information:
CIR Safety Review: The CIR Expert Panel decided that the data on Steareth-2, -10, and -20 were sufficient to reach a decision on the entire group of Steareth ingredients, including Steareth-4, -6, -11, -13 and -15 because of the chemical similarity of all the Steareths.
Steareth-2 and -10 were nontoxic in acute oral toxicity studies.
In subchronic testing, Steareth-20 was nontoxic when administered dermally at concentrations of 4%.
Steareth-2 and -10, at concentrations up to 60% in water, were at most mildly irritating to eyes and only mild irritants when tested in cosmetic formulations at concentrations up to 60%.
Structurally similar polyoxyethylene alkyl ethers were neither mutagenic nor tumor promoters.
Steareth-2, -10 and -20 in water were neither primary irritants nor sensitizers to human skin.
Steareth-20 was not phototoxic.
Small amounts of 1,4-dioxane, a by-product of ethoxylation, may be found in the Steareth ingredients.
The potential presence of this material is well known and can be controlled through purification steps to remove it from the ingredients before blending into cosmetic formulations.
More Scientific Information:
The Steareth ingredients are a series of polyoxyethylene stearyl ethers.
In cosmetics and personal care products, the Steareths function mainly as surfactant – emulsifying agents.
They may also be used as wetting agents, solubilizers and nonionic surfactants.
The steareth group is a series of compounds prepared by reacting stearyl alcohol with ethylene oxide to form polyoxyethylene stearyl ethers.
Steareths are waxy solids used primarily as emulsifiers in cosmetics at concentrations of up to 25%.
Steareth-2 and-10 were nontoxic to rats in acute oral toxicity studies.
In subchronic testing, steareth-20 was nontoxic to rabbits when administered dermally at concentrations of 4%.
Steareth-2 and-10, at concentrations of up to 60% in water, were at most mildly irritating to rabbit eyes and only mild irritants when tested in cosmetic formulations at concentrations of up to 60%.
Structurally similar polyoxyethylene alkyl ethers were neither mutagenic nor tumor promoters.
Steareth-2,-10, and-20 in water were neither primary irritants nor sensitizers to human skin.
Steareth-20 was not phototoxic.
On the basis of the available data it is concluded that steareths-2,-4,-6,-7,-10,-11,-13,-15, and-20 are safe as cosmetic ingredients in the present practices of use and concentration.
Nature of Steareth-6:
white flakes or granules.
Melting Point 59. 4~59.8 °c; 210 °c.
Soluble in alcohol, benzene, chloroform, insoluble in water.
Standard:
Steareth-6 is a mixture of solid alcohols.
The system is prepared by reducing ethyl stearate with lithium lead hydride.
Containing no less than 95.0% alcohol (C18H380).
Preparation Method of Steareth-6:
Steareth-6 can be prepared by hydrolysis of cetyl oil, by hydrogenation of stearic acid under catalysis of copper chromate, or by reduction of ethyl stearate with saturated ethanol.
Heptadecene fraction can also be obtained by controlling the polymerization reaction of ethylene under the action of alkyl aluminum, and then the eighteen alcohol can be obtained by carbonyl synthesis.
Trait:
Steareth-6 is white powder, granules, flakes or lumps.
Steareth-6 is soluble in ether, soluble in ethanol, almost insoluble in water.
melting point:
The melting point of this product (General 0612 second method) is 57~60°C.
acid value:
should not be greater than 1. 0 (General 0713).
saponification value:
take Steareth-6 about 20. 0G, according to the operation (General 0713), should not be greater than 2 .0.
iodine value:
take 2.0g of Steareth-6, add chloroform 2 5 m l, shake to dissolve, operate according to law (General rule 0713), should not be greater than 2.0.
hydroxyl value:
should be 197 to 217 (General 0713).
Uses of Steareth-6:
Steareth-6 can be used as an additive for oil-based fracturing fluids instead of decasix alcohol.
Steareth-6 can be used in the production of flat, resin and synthetic rubber, color couplers and so on.
Differential diagnosis:
In the chromatogram recorded under the content determination item, the retention time of the main peak of the test solution should be consistent with the retention time of the main peak of the control solution.
Physico-chemical Properties of Steareth-6:
Molecular Formula: C18H38O
Molar Mass: 270.49
Density: 0.812 g/mL at 25 °C (lit.)
Melting Point: 56-59 °C (lit.)
Boling Point: 210°C15mm Hg
Flash Point: 185°C
Water Solubility: insoluble
Solubility: Insoluble in water, soluble in ethanol, ether, benzene, chloroform.
Vapor Presure: <0.01 mm Hg ( 38 °C)
Vapor Density: 9.3 (vs air)
Appearance: White flakes
Specific Gravity: 0.812
Color: White
Merck: 14,8805
BRN: 1362907
pKa: 15.20±0.10(Predicted)
Storage Condition: 2-8°C
Sensitive: Easily absorbing moisture
Explosive Limit: ~8%
Refractive Index: 1.4356 (estimate)
MDL: MFCD00002823
Physical and Chemical Properties of Steareth-6:
Properties of white flake or granular Crystal
Main purposes: Steareth-6 is used as color forming agent of color film and raw material of resin and synthetic rubber, also used in medicine and so on.
Uses of Steareth-6:
Steareth-6 is used as color forming agent for color film and raw materials for making flat, resin and synthetic rubber, commonly used in the production of surfactants, can also be used in the production of drugs and cosmetics
About Steareth-6:
Steareth-6 is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 tonnes per annum.
Steareth-6 is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.
Consumer Uses of Steareth-6:
Steareth-6 is used in the following products: washing & cleaning products, plant protection products, lubricants and greases, air care products, polishes and waxes and fillers, putties, plasters, modelling clay.
Other release to the environment of Steareth-6 is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Article service life of Steareth-6:
Other release to the environment of Steareth-6 is likely to occur from: indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment), outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).
Steareth-6 can be found in complex articles, with no release intended: vehicles.
Steareth-6 can be found in products with material based on: stone, plaster, cement, glass or ceramic (e.g. dishes, pots/pans, food storage containers, construction and isolation material), plastic (e.g. food packaging and storage, toys, mobile phones) and wood (e.g. floors, furniture, toys).
Steareth-6 is intended to be released from scented: clothes.
Widespread uses by professional workers of Steareth-6:
Steareth-6 is used in the following products: washing & cleaning products, polishes and waxes and plant protection products.
Steareth-6 is used for the manufacture of: textile, leather or fur.
Other release to the environment of Steareth-6 is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners) and outdoor use.
Formulation or re-packing of Steareth-6:
Steareth-6 is used in the following products: lubricants and greases, washing & cleaning products, textile treatment products and dyes, metal working fluids and cosmetics and personal care products.
Release to the environment of Steareth-6 can occur from industrial use: formulation of mixtures.
Uses at industrial sites of Steareth-6:
Steareth-6 is used in the following products: washing & cleaning products, metal surface treatment products, textile treatment products and dyes, polymers, pH regulators and water treatment products, lubricants and greases and leather treatment products.
Steareth-6 is used for the manufacture of: textile, leather or fur.
Release to the environment of Steareth-6 can occur from industrial use: in processing aids at industrial sites and in the production of articles.
Manufacture of Steareth-6:
Release to the environment of Steareth-6 can occur from industrial use: manufacturing of the substance.
SYNONYMS:
emulgen 306P
2-octadecoxyethanol (peg-6)
peg-6 stearyl ether
poly(oxy-1,2-ethanediyl), .alpha.-octadecyl-.omega.-hydroxy- (6 mol EO average molar ratio)
polyethylene glycol (6) stearyl ether
polyoxyethylene (6) stearyl alcohol ether
polyoxyethylene (6) stearyl ether
3,6,9,12,15,18-HEXAOXAHEXATRIACONTAN-1-OL
HEXAETHYLENE GLYCOL
MONOSTEARYL ETHER
PEG-6 STEARYL ETHER
POLYETHYLENE GLYCOL 300 STEARYL ETHER
POLYOXYETHYLENE (6) STEARYL ETHER
STEARETH-6
Regulatory process names:
Octadecan-1-ol, ethoxylated
Octadecan-1-ol, ethoxylated
1 - 2.5 moles ethoxylated
Polyoxyl stearyl ether
CAS names:
Poly(oxy-1,2-ethanediyl), .alpha.-octadecyl-.omega.-hydroxy-
IUPAC names:
1-(2-$l^{1}-oxidanylethoxy)octadecane
2-[2-(octadecyloxy)ethoxy]ethan-1-ol
2-Octadecoxyethanol
2-octadecoxyethanol
alpha-octadecyl-omega-hydroxy-polyglycolether
Octadecan-1-ol, ethoxylated
Octadecan-1-ol, ethoxylated (1 - 2.5 mol EO)
Octadecan-1-ol, ethoxylated (1 - 2.5 moles ethoxylated)
Octadecan-1-ol, ethoxylated (10 mol EO)
Octadecan-1-ol, ethoxylated, < 2.5 EO
Octadecan-1-ol, ethoxylated, < 2.5 EO
Poly (oxy-1,2-ethanediyl) - α - octadecyl -ω- hydroxyl
Poly(oxy-1,2-ethanediyl) , .alpha.-octadecyl-.omega.-hydroxy-
Poly(oxy-1,2-ethanediyl), .alpha.-octadecyl-.omega.-hydroxy-
poly(oxy-1,2-ethanediyl), .alpha.-octadecyl-.omega.-hydroxy-
Poly(oxy-1,2-ethanediyl), a-octadecyl-w-hydroxy-
Poly(oxy-1,2-ethanediyl), a-octadecyl-w-hydroxy- (2-5EO)
Poly(oxy-1,2-ethanediyl), alpha-octadecyl-omega-hydroxy-
Poly(oxy-1,2-ethanediyl), α-octadecyl-.omega.-hydroxy-
Steareth-2
stearyl alcohol, ehtoxylated
Trade names:
1-Octadecanol, monoether with polyethylene glycol
[1-14C]Octadecylalkohol + 7 EO; 7-EO
A 20
A 20 (Chinese surfactant)
Aduxol ST 05
Alcool en C18 éthoxylé
Alkasurf SA 2
Alkyl polyglycol ether C18 with EO
Alkyl Polyglykolether C18 mit EO
ARLYPON SA 10 FEST; 10-EO
Arlypon SA 10; 10-EO
Arlypon SA 20 D; 20-EO
ARLYPON SA 20 FEST; 20-EO
Arlypon SA 20; 20-EO
Arlypon SA 4 D; 4-EO
Arlypon SA 4; 4-EO
Arlypon SA 6; 6-EO
ARLYPON SA 7 FEST; 7-EO
ARLYPON SA 7; 7-EO
Avivan SO 6
Berol 043
Berol 08
Brij 700
Brij 72
Brij 721
BRIJ 721 FL; 21-EO
Brij 721 P; 21-EO
Brij 721 VP; 21-EO
BRIJ 721; 21-EO
BRIJ 72; 2-EO
Brij 76
BRIJ 76; 10-EO
Brij 78
BRIJ 78 P; 20-EO
Brij 78; 20-EO
C18-Fettalkohol + 12 EO; 12-EO
C18-Fettalkohol + 14 EO; 14-EO
C18-Fettalkohol + 20 EO; 20-EO
C18-Fettalkohol + 28 EO; 28-EO
C18-Fettalkohol + 52 EO; 52-EO
Cemulsol DB 25/18
Cetalox AT
Ekaline G 80
EM 1207
Empilan KM 50
EMTHOX 5888-A POE (20) STEARYL ALCOHOL; 20-EO
Emulgen 306P
Emulgen 310
Emulgen 320P
Emulgen 3299
ESK 1
ESK 1 (demulsifier)
Ethosperse CA 20
Ethoxylated octadecyl alcohol
Ethoxylated stearyl alcohol
Eumulgin S 21; 21-EO
Eumulgin S 2; 2-EO
Eumulgin SA 2; 2-EO
FAEO C18 + 10EO; 10-EO
FAEO C18 + 11EO; 11-EO
FAEO C18 + 12EO; 12-EO
FAEO C18 + 13EO; 13-EO
FAEO C18 + 14.6EO; 14,6-EO
FAEO C18 + 14EO; 14-EO
FAEO C18 + 15EO; 15-EO
FAEO C18 + 20EO; 20-EO
FAEO C18 + 21EO; 21-EO
FAEO C18 + 28EO; 28-EO
FAEO C18 + 2EO; 2-EO
FAEO C18 + 30EO; 30-EO
FAEO C18 + 4EO; 4-EO
FAEO C18 + 52EO; 52-EO
FAEO C18 + 5EO; 5-EO
FAEO C18 + 6EO; 6-EO
FAEO C18 + 7EO; 7-EO
FAEO C18 + nEO; n-EO
Fettalkoholpolyglykolether
G 3694POE
G 3710
G 3720
G 3720POE
Genapol S
Genapol S 020
Genapol S 100
Genapol S 150
Glycols, polyethylene, monooctadecyl ether
Heptaethylene glycol monooctadecyl ether
Hetoxol STA 30
IDH 45601; 4-EO
LAMECREME SA 7 FEST; 7-EO
Lamecreme SA 7; 7-EO
Leunapon-F 18
Levenol PW
Lipocol S 20
LOROL C 18 + 2EO; 2-EO
Macol SA
Macol SA 10
Macol SA 100
Macol SA 15
Macol SA 2
Macol SA 20
MACOL SA 20; 20-EO
Macol SA 40
Macol SA 5
Marlipal 1850
Mergital S 2
Mergital S 21; 21-EO
Newcol 1807
Nissan Dispanol 16A
Nissan Nonion S 207
Nissan Nonion S 215
Nissan Nonion S 220
Nissan Nonion S 230
Noigen 140E
Nonion S 207
Octadecanol + EO
Octadecylalkohol + 7 [14C]EO; 7-EO
Poly(oxy-1,2-ethandiyl), α-octadecyl-ω-hydroxy-
Poly(oxy-1,2-ethanediyl), α-octadecyl-ω-hydroxy-
POLYOXYAETHYLEN(10)STEARYLAETHER
POLYOXYAETHYLEN(2)STEARYLAETHER
POLYOXYAETHYLEN(20)STEARYLAETHER
Polyoxyethylen
Polyoxyethylen-(2)-Stearylalkohol
Polyoxyethylen-Stearylalkohol-ether
Polyoxyethylen-stearylether
Sansheng AFE 7620
Stearath 7
Stearath 7 (CTFA)
STEARETH
Steareth
Steareth-10
Steareth-10 (INCI)
Steareth-100
Steareth-100 (INCI)
Steareth-10; 10-EO
Steareth-11
Steareth-11 (INCI)
Steareth-11; 11-EO
Steareth-13
Steareth-13 (INCI)
Steareth-13; 13-EO
Steareth-14
Steareth-14 (INCI)
Steareth-15
Steareth-15 (INCI)
Steareth-15; 15-EO
Steareth-16
Steareth-16 (INCI)
Steareth-2
Steareth-2 (CTFA)
Steareth-2 (INCI)
Steareth-20
Steareth-20 (INCI)
Steareth-20; 20-EO
Steareth-21
Steareth-21 (INCI)
Steareth-25
Steareth-25 (INCI)
Steareth-27
Steareth-27 (INCI)
Steareth-2; 2-EO
Steareth-3
Steareth-3 (INCI)
Steareth-30
Steareth-30 (INCI)
Steareth-4
Steareth-4 (INCI)
Steareth-40
Steareth-40 (INCI)
Steareth-4; 4-EO
Steareth-5
Steareth-5 (INCI)
Steareth-50
Steareth-50 (INCI)
Steareth-6
Steareth-6 (INCI)
Steareth-6; 6-EO
Steareth-7
Steareth-7 (INCI)
Steareth-7; 7-EO
STEARYL ALCOHOL + 2EO; 2-EO
Stearyl alcohol, ethoxylated
Stearylalkohol + 2 EO; 2-EO
Stearylalkohol + 7 EO; 7-EO
Stearylalkohol + EO
Stearylalkohol 21 EO; 21-EO
STEARYLALKOHOL 4 EO GEREINIGT; 4-EO
STEARYLALKOHOL 4 EO; 4-EO
Stearylalkohol 6 EO/Stearylalkohol; 6-EO
Stearylalkohol 7 EO/Stearylalkohol; 7-EO
Stearylalkohol EO 20
Stearylalkohol-(10)polyglycolether
Stearylalkohol-(20)polyglycolether
Stearylalkohol-(4)polyglycolether
Stearylalkohol-(5)polyglycolether
Stearylalkohol-(6)polyglycolether
Stearylalkohol-(7)polyglycolether
Stearylalkohol-(XX)polyglycolether
Stearylether
Sympatens-AS/020
Tego Antifoam 204
Um A 549; 14,6-EO
Volpo S 2; 2-EO
Volpo S2
Volpo S2A
Xiameter AFE 7610
α-Octadécyl-ω-hydroxypoly(oxyéthylène)
Other names:
Poly(oxy-1,2-ethanediyl), .alpha.-octadecyl-.omega.-hydroxy
Other identifiers:
106707-02-2
106707-02-2
107120-43-4
107120-43-4
107120-44-5
1150565-38-0
1150565-38-0
12679-67-3
12679-67-3
130419-63-5
130419-63-5
1436693-16-1
1436693-16-1
147827-15-4
147827-15-4
161622-43-1
161622-43-1
171286-87-6
171286-87-6
181828-61-5
181828-61-5
31798-99-9
31798-99-9
31917-55-2
31917-55-2
32127-87-0
32127-87-0
459409-05-3
459409-05-3
503027-88-1
503027-88-1
51109-88-7
51109-88-7
55247-83-1
58339-87-0
58339-87-0
59890-16-3
59890-16-3
623588-92-1
623588-92-1
65489-62-5
65489-62-5
74749-69-2
74749-69-2
74749-72-7
74749-72-7
78690-64-9
78690-64-9
8013-79-4
8013-79-4
80700-13-6
80700-13-6
9005-00-9
96595-44-7
96595-44-7