TYLOSE MHB 3000 YP2

CAS Number: 9032-42-2

TYLOSE MHB 3000 P2 Usage Areas:
In paint removers
Chafing fuel thickener
TYLOSE MHB 3000 P2 is used as a binder in toothpaste, detergent and cosmetic products. 
 
TYLOSE MHB 3000 P2 USAGE AREAS:
TYLOSE MHB 3000 P2 in the latex paint composition prevents the gel from gelling, contributes to its dispersion, stabilizes the latex paint and increases the viscosity of the component. 
TYLOSE MHB 3000 P2 has good compatibility with other materials such as pigments, auxiliary substances, fillers and salts in its components.
Coatings thickened with TYLOSE MHB 3000 P2 have good rheology at various cutting speeds and are pseudoplastic.
 
Machinability and leveling properties of TYLOSE MHB 3000 P2 are good: Brush, roller, spray and can be applied with other construction methods; it does not easily drip, sag or bounce.
TYLOSE MHB 3000 P2 Used in paint removers.
TYLOSE MHB 3000 P2 Used as chafing fuel thickener.
TYLOSE MHB 3000 P2 is used as a binder, thickener, stabilizer and dispersant in toothpaste, detergent and cosmetic products.
 
TYLOSE MHB 3000 P2 Provides easy application with its shear strength and binding effect in products with its feature of holding water in its structure.
High viscosity TYLOSE MHB 3000 P2 is mainly used as an adhesive for finishing and finishing fluids in oil drilling. 
Low viscosity TYLOSE MHB 3000 P2 is used as a fluid loss additive. 
Among the various solutions required for drilling, finishing, cementing and crushing, TYLOSE MHB 3000 P2 provides good fluidity and stability to the mud.
TYLOSE MHB 3000 P2 is used as binder, thickener, stabilizer and dispersant in toothpaste, detergent and cosmetic products.
 
TYLOSE MHB 3000 P2 provides easy application with its shear strength and binding effect in the products with its water retention feature.
TYLOSE MHB 3000 P2 helps to create movies.
 
TYLOSE MHB 3000 P2 FEATURES: 
TYLOSE MHB 3000 P2 has thickening, bonding, dispersion, film formation and suspension properties. 
When the pH of the TYLOSE MHB 3000 P2 water solution is between 2 and 12, the viscosity is stable. 
If TYLOSE MHB 3000 P2 exceeds this range, acidic or alkaline oxidative degradation occurs and viscosity decreases.
The viscosity of the TYLOSE MHB 3000 P2 aqueous solution decreases as the temperature increases, and viscosity can be recovered when the temperature drops to the original temperature. 
TYLOSE MHB 3000 P2 If there is no high salt concentration, no gel or precipitate forms when the solution is heated to the boiling point; so TYLOSE MHB 3000 P2 is very resistant to temperature.
 
TYLOSE MHB 3000 P2 aqueous solution is a nonionic system and can be used in other water-soluble polymers, surfactants, salts, etc. can be found with. 
For this reason, TYLOSE MHB 3000 P2 is widely used in the daily chemical industry.
TYLOSE MHB 3000 P2 Has the feature of thickening. 
TYLOSE MHB 3000 P2 has the adhesive feature. 
TYLOSE MHB 3000 P2 has the ability to form dispersion. 
TYLOSE MHB 3000 P2 has film formation and suspension properties.

Standard TYLOSE MHB 3000 P2 Shelf Life: 1080DAYS
DFAR Applicable: NO
Revision Level Applicable: NO
Proprietary Part: NO
Hazardous: NO

When the pH of the TYLOSE MHB 3000 P2 water solution is between 2 and 12, the viscosity is stable. 
If TYLOSE MHB 3000 P2 exceeds this range, acidic or alkaline oxidative degradation will occur and viscosity will decrease. 
TYLOSE MHB 3000 P2 has good workability and leveling properties: TYLOSE MHB 3000 P2 can be applied by brush, roller, spray and other construction methods; does not easily drip, sag or splash.
TYLOSE MHB 3000 P2 CAS Number is: 9032-42.

The viscosity of the TYLOSE MHB 3000 P2 aqueous solution decreases as the temperature increases, and the viscosity can be recovered when the temperature drops to the original temperature. 
TYLOSE MHB 3000 P2 If there is no high salt concentration, when the solution is heated to boiling point, no gel or precipitate is formed; ie TYLOSE MHB 3000 P2 is very resistant to temperature.
TYLOSE MHB 3000 P2 aqueous solution is a nonionic system and can be used for other water soluble polymers, surfactants, salts, etc. can be found together with. 
Therefore, TYLOSE MHB 3000 P2 is widely used in the daily chemical industry.
Methyl hydroxy ethyl cellulose, Methyl hydroxyethyl cellusoze, 2-hydroxy methyl ether
TYLOSE MHB 3000 P2 is very resistant to temperature.

TYLOSE MHB 3000 P2 (methyl hydroxyethyl cellulose/Tylose MH-grades) are water soluble, nonionic cellulose ethers, which are offered as free flowing powder or in granular form. 
TYLOSE MHB 3000 P2 may contain further additives which for example control the dissolution behavior or the thickening power.

Constitution: Methyl hydroxyethyl cellulose
Appearance: white powder
Delayed solubility: no
Etherification: high etherification
Modification: -
Particle size: powder
Level of  viscosity: 3000 mPas
Product specification
Product specificationMoisture: ≤ 7 %
Content of NaCl: ≤ 1.5 %
Particle size: <180µm: min. 90 %
Particle size: <100µm: min. 25 %
Viscosity: 3300 - 4500 mPas
Additional data

Active substance: ≥ 91.5 %
Bulk density: ca. 400 g/l
Etherification (MS/DS): ca. 0.15 / ca. 1.90
Particle size: <63 µm: ca. 20%
Recommended fields of application
Decorative renders, mineral based Tile adhesives, standard Trowelling compounds, cement based Grouts, cement based.
Application performance
Consistency development: slow
Water retention: low
Final consistency: low
Influence on cement hydration: very low
Sag resistance: low
Heat stability: standard
Water demand: very low
Packaging, Storage, Safety instructions Packaging, Storage, Safety instructions

Safety instructions Like all fine-particle organic substances, cellulose ethers constitute a dust explosion hazard. 
Dust formation and deposits must be kept to a minimum so that no ignitable dust/air mixtures can form. 
Ignition sources such as naked flames, hot surfaces, sparks and static electricity should be avoided.

TYLOSE MHB 3000 P2 starts to decompose at about 200°C. 
TYLOSE MHB 3000 P2s ignition temperature is >360°C. 
TYLOSE MHB 3000 P2 burns easily and the fire may spread. 
When stored in closed containers, or in its original packaging in a dry place at room temperature, Tylose can be kept for a long time. 
In the case of high viscosity grades, a slow loss of viscosity can be measured after lengthy storage (>1 year). 
TYLOSE MHB 3000 P2 absorbs water from moist air. 
Once opened, TYLOSE MHB 3000 P2 container must be resealed and kept tightly closed. 
20 kg Valved multi-layer paper sack with polyethylene interleaf.

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.