Zeliquid LP 2 is used in the production of Gypsum Plasterboard.
Zeliquid LP 2 creates small air pockets in gypsum plasterboard.

Zeliquid LP 2 is liquid air-entraining agent for gypsum plasterboard production.

Lauryl polyglycol ether sulphate with 3 mole ethylene oxide, ammonium salt
Anionic wetting agent and emulsifier

Product properties *)
Active substance content: about 50 %

about 20% 2-butoxyethanol and
about 27% water

Appearance at 20°C: clear liquid
pH value (DIN EN 1262), 1% in water: ca. 7 - 8
Solubility at 20 °C: soluble in water
Density (DIN 51757) at 20 °C: about 1,04 g/cm³

Viscosity (DIN 53015) at 20 °C: < 100 mPa*s
Flash point (DIN 51758): > 100 °C

Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness. 
In mineral acid solutions at elevated temperature Zeliquid LP 2 like all ether sulphates tends to hydrolyse.

Zeliquid LP 2 is used as
· wetting agent
· dispersing agent and
· emulsifier.

Air entrainment is the intentional creation of small air pockets in concrete by the addition of an air entraining agent to the mix. 
The primary purpose of air entrainment is to increase the durability of the hardened concrete, especially in climates subject to freeze-thaw as the air pockets relieve internal pressure on the concrete by providing tiny chambers for freezing water to expand into. 
Additionally, workability of the concrete is increased.

Based on our experience in surfactant chemistry, we offer a range of air entraining agents under the brand names Hostapur and, Genapol, and Zeliquid.

Our Hostapur OSB is used as an air entraining agent for mortars, plasters and grouts based on cement, gypsum or lime. 
It is rapidly soluble, enables faster wetting of solid particles in the dry admixture and the build-up of micro foam in a short time. 
The performance of this air entrainer is superior to traditional sodium lauryl sulfates, as it is not sensitive to calcium salts, non-hygroscopic and twice as efficient in producing controllable, strong and stable micro foam.

Genapol LSS Powder
Strong foaming agent, sensitive and stable against water hardness salts and superior foaming agent, fast foam built-up and high foam stability with micro structure. 

Hostapur OSB
Hostapur OSB generates highly stable micro foam and is unsusceptible to water hardness. Additionally, it has a low tendency to build up viscosity. 

Emulsogen EPA 1954
Emulsogen EPA 1954 is used as anionic emulsifier for the emulsion polymerization of vinyl acetate dispersions, styrene-butadiene latex and E-PVC. 

Genapol LRO liq.
Genapol LRO liquid is a sodium lauryl ether sulfate which is a strong foaming agent and unsusceptible to water hardness. it is also a wetting agent and adjuvant used in crop protection applications and in industrial and home care products. 

Hostapur AE
Blend of anionic and non-ionic surfactants MORE

Hostapur OS liq.
Hostapur OS liquid is an aqueous solution of an alpha olefin sulfonate which generates highly stable micro-foam and is unsusceptible to water hardness. It is also used as anionic wetting agent in liquid formulations and is a high foaming primary surfactant for handy dishwashing liquids. 

Zeliquid LP 2
Zeliquid LP 2 is compatible with other anionic and nonionic surfactants and resistant to water hardness. 

Zeliquid LPN
Solution of anionic and nonionic surface active agents in water 

Bu internet sitesinde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır. Çerezler hakkında detaylı bilgi almak için Kişisel Verilerin Korunması Kanunu mevzuat metnini inceleyebilirsiniz.